Polyetheretherketone (PEEK)

Cabin Doors on the Airbus A350 are Lifting off with a Primary Structural Component Made from Victrex® Peek Polymer
Polyetheretherketone (PEEK)

Cabin Doors on the Airbus A350 are Lifting off with a Primary Structural Component Made from Victrex® Peek Polymer

WEST CONSHOHOCKEN, PA USA- – Airbus Helicopters is replacing aluminum in a fitting in the aircraft door of the Airbus A350-900 with a high-modulus, carbon fiber-reinforced high performance polymer. The brackets, now manufactured from VICTREX® PEEK 90HMF40, has been developed by Airbus Helicopters and is in serial production for commercial use after receiving the relevant component...

Read More »
Cabin Doors on the Airbus A350 are Lifting off with a Primary Structural Component Made from Victrex-® Peek Polymer
Polyetheretherketone (PEEK)

Cabin Doors on the Airbus A350 are Lifting off with a Primary Structural Component Made from Victrex-® Peek Polymer

WEST CONSHOHOCKEN, PA USAÂ- – Airbus Helicopters is replacing aluminum in a fitting in the aircraft door of the Airbus A350-900 with a high-modulus, carbon fiber-reinforced high performance polymer. The brackets, now manufactured from VICTREX® PEEK 90HMF40, has been developed by Airbus Helicopters and is in serial production for commercial use after receiving the relevant component...

Read More »
Ensinger High-performance Plastics First to Comply Both with EN ISO 23936-1 and NORSOK M-710 Standards for Oil & Gas
Plastic Injection Molding Services

Ensinger High-performance Plastics First to Comply Both with EN ISO 23936-1 and NORSOK M-710 Standards for Oil & Gas

Ensinger announces that semi-finished products made with VICTREX® PEEK polyetherether-ketone resin are the first to achieve compliance for use in highly demanding oil and gas applications according to EN ISO 23936-1:2009 as well as NORSOK M-710, Edition 3. Polyetheretherketone (PEEK) is a semi-crystalline thermoplastic. The most well-known member of the polyaryletherketone group has excellent...

Read More »
Ensinger High-performance Plastics First to Comply Both with EN ISO 23936-1 and NORSOK M-710 Standards for Oil & Gas
Plastic Injection Molding Services

Ensinger High-performance Plastics First to Comply Both with EN ISO 23936-1 and NORSOK M-710 Standards for Oil & Gas

Ensinger announces that semi-finished products made with VICTREX-® PEEK polyetherether-ketone resin are the first to achieve compliance for use in highly demanding oil and gas applications according to EN ISO 23936-1:2009 as well as NORSOK M-710, Edition 3. Polyetheretherketone (PEEK) is a semi-crystalline thermoplastic. The most well-known member of the polyaryletherketone group has excellent...

Read More »
Victrex Presents Expanded Automotive Product Portfolio at Fakuma 2015 Show
Plastic Injection Molding Services

Victrex Presents Expanded Automotive Product Portfolio at Fakuma 2015 Show

Thornton Cleveleys, UK –- At the Victrex stand at the upcoming Fakuma trade show (Hall A4, Stand 4106), the focus will be on striving to help customers reach the top of their game by differentiation and exploiting new market opportunities faster. Fundamental to this is Victrex’s continuous development as a provider of polyaryletherketone (PAEK)-based complete solutions that address market...

Read More »
Victrex Presents Expanded Automotive Product Portfolio at Fakuma 2015 Show
Plastic Injection Molding Services

Victrex Presents Expanded Automotive Product Portfolio at Fakuma 2015 Show

Thornton Cleveleys, UK –Â- At the Victrex stand at the upcoming Fakuma trade show (Hall A4, Stand 4106), the focus will be on striving to help customers reach the top of their game by differentiation and exploiting new market opportunities faster. Fundamental to this is Victrex’s continuous development as a provider of polyaryletherketone (PAEK)-based complete solutions that address...

Read More »
Ensinger's Tecapeek® Offers Engineers a High Quality, Lower Stress, Easier to Machine Stock Shape
Polyetheretherketone (PEEK)

Ensinger's Tecapeek® Offers Engineers a High Quality, Lower Stress, Easier to Machine Stock Shape

Ensinger, Inc., a world leading PEEK extruder, has been using Victrex-® PEEK polymer for extruding TECAPEEK® for over thirty years. VICTREX®, the first resin supplier to make PEEK polymer, owns and controls the resin manufacturing process from start to finish. Control of the process assures integrity of the finished product at all points, resulting in fewer particulates. Lower levels of...

Read More »
Ensinger's Tecapeek-® Offers Engineers a High Quality, Lower Stress, Easier to Machine Stock Shape
Polyetheretherketone (PEEK)

Ensinger's Tecapeek-® Offers Engineers a High Quality, Lower Stress, Easier to Machine Stock Shape

Ensinger, Inc., a world leading PEEK extruder, has been using VictrexÂ-® PEEK polymer for extruding TECAPEEK® for over thirty years. VICTREX®, the first resin supplier to make PEEK polymer, owns and controls the resin manufacturing process from start to finish. Control of the process assures integrity of the finished product at all points, resulting in fewer particulates. Lower...

Read More »
Fusible-Core Technology Enables Design of Complex, Victrex® Peek Fuel Housings to Improve Aircraft Fuel and Manufacturing Efficiency
Polyetheretherketone (PEEK)

Fusible-Core Technology Enables Design of Complex, Victrex® Peek Fuel Housings to Improve Aircraft Fuel and Manufacturing Efficiency

The combination of Egmond Plastic's fusible-core technology and a VICTREX-® PEEK polymer solution result in more than a 30% cost saving and up to 50% weight reduction WEST CONSHOHOCKEN, PA  USA — In the manufacturing of complex fuel housings for the global aircraft industry, cost savings of more than 30% and weight savings of up to 50% can be achieved as opposed to existing metal designs....

Read More »
Fusible-Core Technology Enables Design of Complex, Victrex-® Peek Fuel Housings to Improve Aircraft Fuel and Manufacturing Efficiency
Polyetheretherketone (PEEK)

Fusible-Core Technology Enables Design of Complex, Victrex-® Peek Fuel Housings to Improve Aircraft Fuel and Manufacturing Efficiency

The combination of Egmond Plastic's fusible-core technology and a VICTREXÂ-® PEEK polymer solution result in more than a 30% cost saving and up to 50% weight reduction WEST CONSHOHOCKEN, PA  USA — In the manufacturing of complex fuel housings for the global aircraft industry, cost savings of more than 30% and weight savings of up to 50% can be achieved as opposed to existing metal...

Read More »

All Topics