Plating Services

Gold Plating for Space Programs
Plating Services

Gold Plating for Space Programs

Epner Technology is a leading plating and coating service. Precious metal plating and gold plating to NIST reflectance standards is Epner's specialty. With over 90 years of electro and electroless plating experience Epner is ISO 9001:2000 and NADCAP certified. Epner showcasing radiation shield for a space based system with a laser gold finish. This large radiation shield started life as a 30'...

Read More »
Plating Services

Nico Products Electroless Nickel Plating Services

Electroless nickel plating (also called EN plating) is a popular choice when looking to protect industrial parts from corrosion and wear. One of the main benefits of electroless nickel plating is that it does not use an electrical current to facilitate the plating process; allowing for a very uniform deposit and tighter controls of the deposit thickness. In addition, with the proper pre-plate...

Read More »
Plating Services

Silver Plating Service conforms to Mil QQ-S-365D standard.

Offering conductivity and corrosion resistance, Silver Plating creates surface that can be soldered and exhibits low electrical resistance. It can be used as engineering coating as well as for bearing surfaces and anti-galling applications. Conforming to Mil QQ-S-365D and ASTM B 700 standards, plating is available in variety of tarnish-resistant formulations as well as matte, bright, and...

Read More »
Laser Gold Forms an Impenetrable Heat Barrier
Coatings

Laser Gold Forms an Impenetrable Heat Barrier

Epner Technology Inc. is the high-tech engineering electroplating firm whose work orbits Mars on NASA spacecraft. It is now a Technology Partner with DiMora Motorcar, using the same Laser Gold system to reflect engine heat in the $2 million Natalia SLS 2 sport luxury sedan. Most automobiles use a metal firewall to insulate the passenger compartment from the heat generated by the engine. Instead,...

Read More »
Coatings

Plating Service targets exotic metals and plastics.

Blister-Free Plating is suited for variety of dielectric materials including engineering plastics such as Ultem(TM), Teflon®, Ryton(TM), Torlon(TM), and ABS. It also enables unusual or difficult metals, such as titanium, molybdenum, tungsten, magnesium, AlBeMet, and beryllium to withstand high brazing or soldering temperatures. Applications include coatings for optical and reflective...

Read More »
Laser Gold Plating for IR Reflectance
Coatings

Laser Gold Plating for IR Reflectance

Epner Technology is a leading plating and coating service. Precious metal plating and gold plating to NIST reflectance standards is Epner's specialty. With over 90 years of electro and electroless plating experience Epner is ISO 9001:2000 and NADCAP certified. Epner now adds to it's plating offerings with a unique process for altering the surface morphology of the substrate to be plated or...

Read More »
Gold Plating targets low emissivity optics.
Coatings

Gold Plating targets low emissivity optics.

Intended for products that rely on consistently low emissivity to control thermal load, Laser Gold Plating is effective on difficult metal substrates such as titanium and molybdenum, as well as plastics for EMI shielding or solder ability engineering. Sample products suitable for laser gold plating include thermal shields, beryllium hogouts, radiometers, and stainless steel coil.

Read More »
Plating Services

PEM® China Zinc Plating Line Approved by General Motors

DANBORO, PA, USA, September 8, 2008 - The PEM® China zinc plating line has received approval from General Motors for use in plating parts. As an approved plating applicator for GM, PEM China and related information will be listed in the GM MATSPC system and PEM China will be able to plate parts for GM, its tier suppliers, and other major automotive OEMs. PEM China is a PennEngineering®...

Read More »
Hydraulic System Maintenance and Repair Services

When Time Equals Money

Time is so critical in the crane industry. When one is down it's a pretty big loss," explained Master Mechanic Mark Kaestner of Seattle, Washington's Ness Cranes, Inc. This scenario became reality last summer, when the packing of a 300 ton Ness Cranes' cylinder had worn down into the rod, rendering the crane useless. Due to its 42 foot cylinder, Kaestner struggled to find a company to rebuild and...

Read More »
Testers

Conard Introduces The Conard-Abbott Beam

The Conard-Abbott Beam offers a fast, convenient and economical process for testing solution stress in tin plating baths. Global RoHS (Regulation of Hazardous Substances) compliance requires the elimination of many toxic metals, including lead, from production materials and processes. Tin-lead plating has been used in electronics applications for decades. Without lead, tin plating may develop...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers