Plasma / Flame / Laser Cutters and Cutting Machinery

Lincoln Electric Helps Fabricate Vehicles Used in Action-Packed Need for Speed
Plasma / Flame / Laser Cutters and Cutting Machinery

Lincoln Electric Helps Fabricate Vehicles Used in Action-Packed Need for Speed

Cleveland – Lincoln Electric equipment became an integral part of production for the new Need for Speed movie. Los Angeles fabricator Paul Clarke, contracted by Ghostlight, used a host of Lincoln Electric products to help construct more than 22 vehicles used during filming. Cars seen on-screen are not the typical models that a consumer would drive off the lot. First, many of the hand-fabricated...

Read More »
Plasma / Flame / Laser Cutters and Cutting Machinery

New Laser Capabilities Recently Purchased

Weaver & Sons, Inc. is proud to announce the purchase of a new Amada Laser Cutting System.Â-  This new system will not only add greater reliability to our current laser cutting capabilities, but will also add greater speed and automation which we believe will translate into a better value to our customers," says Dyron Overton - President & General Manager.  "We have also added...

Read More »
Victor Technologies to Exhibit Its Most Advanced Plasma Cutting, Gas Equipment, and Welding Solutions at FABTECH 2013
Plasma / Flame / Laser Cutters and Cutting Machinery

Victor Technologies to Exhibit Its Most Advanced Plasma Cutting, Gas Equipment, and Welding Solutions at FABTECH 2013

Products include the Victor® Thermal Dynamics® Ultra-Cut® XT series of power sources and CUTMASTER® series of hand-held plasma cutters; Victor® 400 Series oxy-fuel torch; Tweco® Switchable Magnetic Products, Tweco Classic MIG gun series and Fabricator® 141i 3-in-1 welder; and Stoody® hardfacing and hardbanding wires for oil and gas exploration. ST....

Read More »
Plasma / Flame / Laser Cutters and Cutting Machinery

Hypertherm Develops Consumable Optimization Package for HyPerformance HPR and HPRXD Customers

HANOVER, N.H.—Hypertherm, a U.S. based manufacturer of advanced cutting systems, is offering a new consumable optimization package to owners of its HyPerformance® HPR® and HPRXD® plasma cutting systems. This package is designed to help operators optimize the cut quality, torch performance, and consumable life of their system. The consumable optimization package includes the...

Read More »
2D Laser Cutting Machine supports high-speed operation.
Plasma / Flame / Laser Cutters and Cutting Machinery

2D Laser Cutting Machine supports high-speed operation.

Available with 2.5 or 4 kW resonator, TUBE GEAR can process round and rectangular tube and pipe with diameters up to 6 in., has standard 5 in. Servo Focus torch, and can make cuts at rapid traverse rate of up to 6,299 ipm. Triple chuck system minimizes warp and material vibration, allowing accurate, high-speed processing of material up to 21.3 ft long, while bundle material load/unload system...

Read More »
Bringing A Vision to Life at the New 6 Salon
Plasma / Flame / Laser Cutters and Cutting Machinery

Bringing A Vision to Life at the New 6 Salon

The owners of 6 Salon had a unique vision. To help them make that vision a reality they turned to a talented designer, and to 3-Dimensional Services. World class is not a term that is bestowed lightly, but that's precisely what owners and brothers George and Johnny Nikollaj and cousin Tomy Lulgjuraj were aiming for when they opened 6 Salon in Royal Oak, Mich., in 2003. Along with their team of...

Read More »
Plasma / Flame / Laser Cutters and Cutting Machinery

Miller Consolidates Smith Equipment Products Under Brand, Expands Metal Cutting Offering

The Miller metal cutting offering now includes oxy-fuel products formerly branded as Smith Equipment. APPLETON, Wis.Â- – Miller Electric Mfg. Co. has announced that it has consolidated the Smith Equipment oxy-fuel cutting equipment product line under the Miller brand. The consolidation expands the current Miller metal cutting offering, which includes a variety of portable plasma cutting...

Read More »
Jenoptik Shows Laser Machine for Innovative 3D-Metal Working in Essen, Germany.
Plasma / Flame / Laser Cutters and Cutting Machinery

Jenoptik Shows Laser Machine for Innovative 3D-Metal Working in Essen, Germany.

From September 16th to the 21st the Lasers and Material Processing Division of Jenoptik presents at the trade fair SCHWEISSEN & SCHNEIDEN (WELDING & CUTTING) their innovative solution for 3D-metal working: The JENOPTIK-VOTAN® BIM enables maximum throughput and precision in the smallest of spaces. At the trade fair SCHWEISSEN & SCHNEIDEN, exhibit booth C122 in Hall 6, Jenoptik will show...

Read More »
Automated Plasma Power Sources offer flexibility, reliability.
Plasma / Flame / Laser Cutters and Cutting Machinery

Automated Plasma Power Sources offer flexibility, reliability.

Ultra-Cut® XT Series delivers ISO Class 3 or better cuts on any material from gauge to 2 in. thick, reducing bevel and need for post-cut finishing in automated plasma cutting. On non-ferrous materials, unit produces optimal cut quality using Water Mist Secondary (WMS™) process. Power supplies, able to cut 1 in. thick steel at 80 ipm and 2 in. thick steel at 30 ipm, use HeavyCut™...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics