Plasma / Flame / Laser Cutters and Cutting Machinery

Air Plasma Cutter offers 1.25 inch max cut capacity.
Plasma / Flame / Laser Cutters and Cutting Machinery

Air Plasma Cutter offers 1.25 inch max cut capacity.

CUTMASTER(TM) 101 is equipped with 1Torch(TM) plasma torch and ATC(TM) quick disconnect, allowing operator to switch torches between hand and machine torch applications, quickly replace damaged equipment, and add or remove lead extensions to match job requirements. Wraparound roll bars provide protection, and powder coat finish offers scratch resistance. At 80 A of cutting power, CUTMASTER 101 is...

Read More »
Air Plasma Cutting System is suited for metal fabricators.
Plasma / Flame / Laser Cutters and Cutting Machinery

Air Plasma Cutting System is suited for metal fabricators.

Equipped with 1Torch(TM) plasma torch and ATC(TM) (Advanced Torch Connector) quick disconnect, CUTMASTER(TM) 81 lets operator switch torches between hand and machine torch applications, replace damaged equipment, and add or remove lead extensions to match job requirements. It features 60 A cutting power and 1Series start technology. Rated for 1 in. max cut capacity, system is suitable for cutting...

Read More »
Air Plasma Cutting System suits high volume metal fabricators.
Plasma / Flame / Laser Cutters and Cutting Machinery

Air Plasma Cutting System suits high volume metal fabricators.

Equipped with 1Torch(TM) plasma torch and ATC(TM) quick disconnect, CUTMASTER(TM) 51 enables operators to switch torches between hand and machine torch applications and add or remove lead extensions to match job requirements. It is rated for 5/8 in. max cut capacity and cuts aluminum, stainless steel, and mild steel. With 40 A of cutting power, unit utilizes 1Series start technology, which avoids...

Read More »
Metal Cutting System provides dross-free cuts.
Plasma / Flame / Laser Cutters and Cutting Machinery

Metal Cutting System provides dross-free cuts.

HyPerformance Plasma incorporates proprietary HyDefinition®, HySpeed®, and LongLife® technologies. Cut quality is consistent across range of plate thicknesses, and system provides flexibility with up to 38 mm mild steel edge-start cutting. Production pierce capability is 16 mm with 25 mm max pierce. It achieves 100% duty cycle in operating environments from - 10 to +40°C...

Read More »
Multi-Axis Laser System offers 2D and 3D cutting.
Plasma / Flame / Laser Cutters and Cutting Machinery

Multi-Axis Laser System offers 2D and 3D cutting.

Available with 2,500, 3,000, or 4,000 W CO2 laser resonator, DOMINO cuts flat or shaped parts and performs bevel cutting. Cantilever designed 5-axis system has X-Y-Z working capacity of 120 x 60 x 15 in. Laser head also does 2 rotations: 360° continuous and ±135°. CNC focal axis employs capacitance sensor that maintains standoff distance from work surface while adapting to...

Read More »
Plasma / Flame / Laser Cutters and Cutting Machinery

Plasma Arc Cutter uses compressed air for fuel.

Air Force(TM) 625 cuts Â-½ in. steel at 10 ipm using hand-held torch. It severs steel up to 7/8 in. thick and slices through thinner materials such as ¼ in. steel at more than 60 ipm. Wind Tunnel Technology® helps prevent abrasive dust and metal particles from damaging internal components. When paired with engine drive, Air Force 625 draws about 30 primary A on 230 Vac line....

Read More »
Carbon Dioxide Laser provides 300 W power.
Plasma / Flame / Laser Cutters and Cutting Machinery

Carbon Dioxide Laser provides 300 W power.

DIAMOND(TM) K-300 is provided in single turnkey package that installs by connecting to water supply and electrical utilities. All controls are accessible from remote-control unit. Compact, hard-sealed, 10.6 Â-µm, 300 W laser employs diffusion-cooled, slab technology. Product offers square pulse shapes and does not require gas recharging. Applications include non-metal cutting, thin-metal...

Read More »
Carbon Dioxide Laser has 40 W output and compact package.
Plasma / Flame / Laser Cutters and Cutting Machinery

Carbon Dioxide Laser has 40 W output and compact package.

Suited for medium- to high-volume marking, engraving, and desktop manufacturing, GEM-40 low-power, CO2 laser is available in air- and liquid-cooled models and measures 16.2 x 3.6 x 5.5 in. It provides more than 40 W of output power at 10.55-10.63 Â-µm with greater than 98% TEM00 spatial mode and M² less than 1.2 beam quality. With rise time of less than 60 µsec, product runs...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics