Plasma Cutting System makes shapes from sheet metal.
Aviator(TM) XLT has Burny(TM) 1250 Plus microprocessor CNC control for precision motion control of high-speed plasma and oxy-fuel cutting. It can cut 12 ga steel at 250 ipm or 1/4 in. stainless at 100 ipm. FastCAMÃ-® CAD/CAM automatic nesting software is included to process CNC files. Various models cut everything from thin gage sheet metal to 3/4 in. plate. Pak Master 150XL(TM) is for...
Read More »
Heavy-Plate Punch incorporates marking and plasma cutting.
FPB-1800/3, with 177 ton punch station and 3 punching heads, processes plates up to 1 1/4 in. thick and 72 in. wide. Signoscript Marking System employs high-speed carbide milling head that generates appropriate characters in seconds. Marking depth can be selected to achieve recognizable part mark even after painting or galvanizing. Punch is offered with choice of 200 or 400 amp, Hypertherm plasma...
Read More »
Bevel Head provides cuts for 3 and 5 axis applications.
Waterjet Bevel Head is for use with Vision NT CNC Windows(R)-based cutting machine controller. It allows for contour or straightedge beveling in flat-sheet material at any angle from -90 to +90 deg A-axis and -360 to +360 deg C-axis rotation. Bevel head features 0.005 in. total TIR at nozzle tip, 0.1 deg accuracy per axis, and 0.05 total repeatability per axis.
Read More »
Plasma Cutter offers short repositioning time.
Aviator XLT, with FastCAM automatic nesting software, combines liquid-cooled plasma system with Burny 1250 CNC control to produce precision cutting of 12 ga steel at 250 ipm or 1/4 in. stainless at 100 ipm. Traverse speed is 500 ipm and vertical-lift speed of C&G AVC Plus plasma torch lifter 150 ipm. Welded, tubular-steel frame supports integrated 6 x 12 ft down-draft cutting table. Pneumatic air...
Read More »
A Guide to Custom Water Manifold Assemblies
This white paper provides a guide to custom water manifold assemblies.
Read More »
Plasma Cutting System prevents tip failure.
CUTMASTER(TM) 75, a 60 amp, 7/8 inch system, is equipped with fold-back circuit, which prevents tip failure when tip touches work at high-output current levels. Cut is virtually dross-free with minimum of bevel across full range of metal thicknesses. System stands up to rough handling, metal dust, shop grime, and difficult cutting conditions.
Read More »
Air Plasma Cutting System produces 1 in. genuine cut.
CutMaster 100 features PCH-102 SureLok(TM) torch with MaximumLife(TM) electrode. IGBT variable power supply delivers up to 80 amps of cutting current. Unit produces 1 in. cut, with no rework or grinding required, at 10 in. per minute on mild steel. Maximum cut rating is 1 1/4 in. and severance cut rating is 1 1/2 in. Extended tip and shield cup allow beveling at angles up to 45 deg. System has...
Read More »
Plasma Cutter works in demanding environments.
Portable CutMaster(TM) 75 air plasma cutting system, designed for field use, withstands handling, metal dust, and demanding conditions. It has IP-23C protection certification for operator safety and moisture resistance. Unit makes genuine cut of 7/8 in., maximum cut of 1 in., and severance cut of 1-1/4 in.
Read More »
Cutting System produces shapes with accuracy.
Crossfire Precision Shape Cutting System has accuracy of 0.010 in. and repeatability of 0.002 in. in 8 x 8 ft area. It is available in 6, 8, 10 and 12 ft widths, delivers speeds of 900 ipm, and has ac drives and ac brushless motors. Swivel-mounted controller has 12.1 in. liquid crystal display touch-screen and comes with nesting software. Options include plasma station collision sensor, wireless...
Read More »
CO2 Laser offers ultra-short, high-peak-power pulses.
DIAMOND(TM) GEM Q-400 Q-switched CO2 laser produces 15W avg power at 50 kHz repetition rate and 9.25 micons wavelength. It features 2.5 kW peak power with pulse widths controllable to less than 150 ns and peak pulse energies to over 400 microjoules. RF-excited waveguide oscillator is sealed in all-metal housing. Laser is designed for drilling and micromachining applications including PCB microvia...
Read More »
Plasma Cutting System has Boost Conditioner circuit.
Portable Powermaxl000Ã-® G3 Series has power supply that incorporates G3 advanced technologies, such as Auto-voltage input sensing; this allows the operator to run on voltages from 200 to 600 V, 1 or 3-phase, without need for manual linking. G3 design permits high-quality cuts over a wide range of thicknesses. Torches feature HyLife electrodes that extend consumable life. Nozzle wear is...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
