New TLC Vertical and Turning Clamp Meets ASME B30.20 and ASME BTH-1 Standards
Lifts and turns from zero to 90 degrees that is ideal for lifting and turning single curved plate or pipe. Lock open and lock closed feature facilitates attachment and removal from the load. Comes with cam jaw that can safely lift curved surfaces and flat plate.
Read More »
Hydra-Zorb Launches Two New Products
New products complement Hydra-Zorb market leadership in pipe clamping solutions AUBURN HILLS, Mich., May 17, 2017 - Hydra-Zorb Co., the leading manufacturer of today's standard for clamping pipe or tube in the hydraulic, pneumatic and HVAC/R industries, announced the launch of its latest technology innovations, the Bronco Tube and Pipe Saddle and the Titan Riser Clamp. Both products were...
Read More »
ELM Measurement Modules features a flexible connector front-end.
Including 11 modules with different interfaces and input circuitry, ELM series modules feature new metal housings that optimize shielding and cooling in measurement technology applications. Unit offers 24 bit resolution, sampling rates up to 50,000 samples per second, depending on interface and precision timing of synchronization < 1 μs. Measuring accuracy of 100 ppm at 23 °C, device ensures...
Read More »
Vertical Acting Toggle Clamps feature vertical mounting base.
Made of case-hardened sheet metal, zinc-plated, with blue passivated finish, GN 810.1 Universal Fit Steel Vertical Acting Toggle Clamps work according to toggle principle, as lever and clamping bar move in same direction. Products in U-bar version with 2 flanged washers can accommodate application specific clamping screw. Version including spindle assembly with neoprene rubber tip is available as...
Read More »
Rack System Design & Buyer's Guide
There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.
Read More »
Boiler Tube Joint Alignment Tool helps minimize weld failure.
Made of precision machined high strength steel, Esco HOG TIE® Boiler Tube Weld Alignment Clamp rapidly and accurately aligns boiler tube ends to minimize risk of failure from misalignment when welding water wall boiler tubes. One side has 2 through-holes and other has threaded inserts which accept 2 bolts that draw them together, exposing tube ends for tack welding before removal to finish...
Read More »Two-Part Clamps support coarse- and fine-profile conduit.
FeaturingÂ- single rib that makes brackets compatible with both coarse- and fine-profile conduit, PMA® GP Two-Part Support Clamps are designed for use in rail vehicles and vehicles with particularly demanding requirements, as well as wind turbines and other special-purpose machinery. Units offer simplified assembly, with locating pins to lightly hold 2 halves in position. By allowing...
Read More »Fixtureworks is Your Source for Premium Kipp Toggle Clamps
Fixtureworks® offers a full line of Kipp toggle clamps for applications where frequent use and ergonomics are factors. These attractive clamps are also desirable for use on finished products. With high quality bushings that resist scoring and wear, Kipp toggle clamps are built to last. These clamps are designed to withstand over 30,000 cycles. They operate very smoothly, providing constant...
Read More »
Pipe Welding Alignment Clamps cover 3/4 to 12 in. pipe range.
Respectively covering 1–3 in., 2–6 in., and 6–12 in. pipe size ranges, models INT 1-3, INT 2-6, and INT 6-12 feature heavy-duty, forged steel design with electroplating for rust and spatter resistance. Design accelerates alignment of different sizes of pipe with one clamp and will withstand years of heavy field use.
Read More »
Welding End Prep Tool Designed for Highly Repetitive Milling
A portable welding end prep tool that features air-operated clamping which reduces cycle times for highly repetitive end prep milling in fabrication shops is available from ESCO Tool of Holliston, Massachusetts. The MILLHOG® Mongoose Air Clamp™ Welding End Prep Tool is equipped with an air-operated clamp that attaches to a tube or pipe I.D. and releases from it by simply flipping a toggle...
Read More »
One-Piece Clamp and Back Strap secures cable or conduit.
Available in ½–¾ in. (UCS-5075) and ¾–1 in. (UCS-75100) designs, Mighty-HOLD® Universal Clamp Strap meets NEC requirements and is cULus Listed. While UCS-5075 secures ½ and ¾ in. EMT, Rigid, IMC, Liquid Tight Metallic and Non-Metallic, FMC, and Schedule 40 and 80 PVC conduit, as well as .710–1.10 in. ∅ steel and aluminum AC/MC cable, UCS-75100 secures same conduit types...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »
