Permanent Magnets

IMI Now Offers CuNiFe Replacement in Sintered Alnico 2 or 6
Permanent Magnets

IMI Now Offers CuNiFe Replacement in Sintered Alnico 2 or 6

CuNiFe is a copper (60%) nickel (20%) iron (20%) alloy that was developed and has the same linear coefficient of expansion as types of glass.Â- It basically is a cast ingot which is made in the “Book Mold” method in bars that are approx. 28 inches long and 2.5 inches o.d. After casting and shaking the bars out of the mold; they are then cold rolled into the strips through a...

Read More »
IMI Offers Samarium Cobalt Magnets
Permanent Magnets

IMI Offers Samarium Cobalt Magnets

IMI http://www.magnetsim.com/ offers a wide range of SMCO magnets, with sizes ranging from 0.20” thick to 4.000” long, in disc, square, arc, or rectangle.  We also develop customer specific requirements for any application, size, or industry.  If you are reading this on a computer, own a car, have flown in an airplane, talked on a cell phone, used a video camera, or have been subjected...

Read More »
Extruded Neodymium Magnets are available for brushless DC motors.
Permanent Magnets

Extruded Neodymium Magnets are available for brushless DC motors.

Available to replace individual arc segments or slabs with multipole ring magnet, extruded neodymium magnets for brushless DC motors come in different sizes. Magnets are made by extruding bonded neodymium compound through die with established ODs and IDs. With isotropic material characteristics, final magnet can be magnetized to any multipole pattern, including skew patterns, either before or...

Read More »
Magnet Assemblies will not mar surfaces.
Permanent Magnets

Magnet Assemblies will not mar surfaces.

Consisting of RoHS-compliant shielded magnetic assembly with rubber jacket, GN 51.6 Steel Retaining Magnet Assemblies, Disc-Shaped, with Two Internal Threads and Rubber Jacket come in metric sizes and suit applications where surface is readily marred. Magnets' coefficient of friction lends to maximum lateral retaining force. While magnet housing is of zinc plated steel, magnet is neodymium,...

Read More »
Neodymium Countersunk Magnets come in disks and assemblies.
Permanent Magnets

Neodymium Countersunk Magnets come in disks and assemblies.

Manufactured with Neodymium grade 42, disk magnets offer holding forces as great as 20.5 lb. Also available,Â- two zinc-plated countersunk assemblies offer respective holding forces up to 70 and 350 lb. Countersunk magnet disks and assemblies are typically used in matched pairs that attract and may also be used singularly to hold steel doors, tools, or parts being machined.

Read More »
Permanent Magnets

Molycorp Chosen to Supply Rare Earths for Use in High-Efficiency Siemens Wind Turbine Generators

GREENWOOD VILLAGE, CO – Siemens AG ( Siemens") has selected Molycorp, Inc. (NYSE: MCP) ("Molycorp") to supply rare earth materials over the next 10 years from its Mountain Pass, California facility for incorporation into Siemens' high-efficiency, direct drive wind turbine generators.Â-  Molycorp will supply rare earth materials to Shin-Etsu Chemical Co., Ltd. ("Shin-Etsu"), which will...

Read More »
Permanent Magnets hold metal inserts in place.
Permanent Magnets

Permanent Magnets hold metal inserts in place.

In SmCo (samarium cobalt), A4300/… permanent magnetsÂ- can withstand temperatures up to 200°C on permanent basis and up to 300°C for short periods. There is no danger of losing magnetism or retention force, which also remains consistent, if used correctly. Available diameters include 6, 8 and 10 mm, and front side can be contoured by up to 2.5 mm to align it to metal...

Read More »
Permanent Magnets

Eriez® Introduces Orange University® Metalworking Demonstration and Training Vehicle

Erie, PAÂ- – Eriez® introduces the Orange University® Metalworking Demonstration and Training Vehicle, a 32-foot Peterbilt diesel rig with a 24-foot equipment showroom. This state-of-the-art truck will travel throughout North America, delivering hands-on training and education to customers and distributors. The first tour will kick-off in early October. The Orange University...

Read More »
Permanent Magnets

Commercialization of Space Provides Opportunities for Innovation: The Use of Permanent Magnets

The commercialization of space in the United States has created a competitive market in a sector where qualified, incumbent designs were, previously, difficult to displace. The creation of new rocket systems has driven newer and more innovative designs. These designs also carry with them valuable 'lessons learned' from their predecessors. Valcor Engineering has recently had opportunities...

Read More »
Sight Glass Magnets protect equipment and products.
Permanent Magnets

Sight Glass Magnets protect equipment and products.

Available to fit most sight glass loaders, Permanent Rare Earth Sight Glass Magnets remove fine and weakly magnetic ferrous contaminants, while Super Strength Rare Earth Permanent Sight Glass Magnets remove fine and weakly magnetic ferrous contamination from material flowing to injection machines or extruders. Units come in 1 or 5/8 in. magnet diameters and feature continuously welded stainless...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics