Acrylic Paints & Primers

Paints & Coatings

Deck Coating System produces non-skid surface.

Oct 12, 2015

Applied to decks via roller, KiwiGrip Nonskid Deck Coating System provides high-traction surface. Varying application technique of this one-part, water-based, non-toxic acrylic paint allows texture to be adjusted from recreational to mercantile. Loaded with UV stabilizer, homogeneous coating is available in standard colors and may be tinted to custom pastel colors. Black and... Read More

Green & Clean, Paints & Coatings

Sustainable Paints are available for interior/exterior use.

May 21, 2012

Exhibiting hide, scrub, stain, block, and burnish resistance, Emerald Interior paints prevent stains from penetrating, facilitate surface cleanup, and resist water streaking/spotting. These GreenGuard IAQ certified paints emit minimal odor and feature anti-microbial properties. With 100% acrylic formula, Emerald Exterior paints resist blistering, peeling, chalking, fading, mildew, and dirt... Read More

Paints & Coatings

Conductive Floor & Wall Paint with low VOC's

Sep 23, 2010

Northvale, NJ - Antistatic Industries offers a conductive, acrylic, water-based, floor and wall paint. STATICPAINT® is available in all colors and is sold through all Sherwin-Williams retail stores nationwide. Sherwin-Williams vendor # 0030031785. STATICPAINT® protects against any static build-up on personnel, handling parts and assembling of PC boards. STATICPAINT® helps eliminate dust... Read More

Paints & Coatings

Cap and Cover Spray Paint permits upside down application.

Feb 08, 2010

Designed to mark and identify manhole covers and tank valves, UV resistant FAS-MARK(TM) Cap and Cover Paint enables upside down application with little or no overspray and can be applied directly to metal and other clean, dry surfaces. Paint is water-repellant, VOC compliant, and dries within 8-10 min. Available in 8 highly pigmented bright colors, in 15 oz aerosol cans, acrylic paint can also be... Read More

Green & Clean, Paints & Coatings

Floor and Wall Paint features low VOCs.

Oct 02, 2009

Available in 1- or 2-part systems, STATICPAINT® protects against any static build-up on personnel handling parts and assembling PC boards. Conductive, acrylic, water-based paint also helps eliminate dust clinging to walls and has no hot spots. Suitable for indoor or outdoor use, product withstands wear and tear in high traffic areas, and is UV protective to resist fading from halogen,... Read More

Paints & Coatings

Special-Lite Announces Availability of AMP Wood Stain Matching Paint Colors

Aug 28, 2007

Each of Special-Lite's six standard AMP (acrylic modified polyester) wood stain colors now has a complementary Kynar® paint color for anodized aluminum surfaces. Door edges and vision lites can be finished in colors matched to the finish of the face sheets. Special-Lite's AMP products help achieve the warm, rich look of real wood doors and panels without the disadvantages of real wood.... Read More

Paints & Coatings

Enamel Coating dries to touch in 15 minutes.

Jul 20, 2005

Suited for interior or exterior use, KEM 4000 High Solids Acrylic Alkyd Enamel provides high gloss and is VOC-compliant. For light service environments, product may be applied directly to steel without primer. Coating is ready to use with no mixing of additional components, and can be tinted to broad range of colors. KEM 4000 is suited for general metal applications including steel decking,... Read More

Paints & Coatings

Paint glows in the dark for 4 hours.

Apr 16, 2003

Fast Glo Acrylic Safety Marking Paint is single component acrylic with phosphorescent luminescent pigment that enables paint to glow yellow/green in dark for up to 4 hours. Paint is for marking aisle ways, emergency routes, boundaries, and stairways to identify safe passageways in event of power outage or failure of back-up power systems. It can be applied by brush, roll, or spray and comes in... Read More

Paints & Coatings

Acrylic Paint provides one-coat, high-build finish.

Oct 16, 2002

Single-component Fast Clad(TM) HB Acrylic cuts costs in new construction and maintenance projects by eliminating need for two- or three-coat systems. Coating provides 5-8 mils DFT when applied over zinc-rich primers. It can also be applied over other primers and directly to prepared steel. Paint offers early moisture resistance and dries to touch in one hour at 77°F. Applications include... Read More

Paints & Coatings

Aerosol Paints suit touch-ups and hard-to-reach places.

Oct 01, 2002

Tough Coat® aerosol paints have fan-shaped spray pattern for maximum coverage. With turn of nozzle insert, EZ TOUCH® FANSPRAY® Nozzle pattern goes from vertical to horizontal. High-solids coverage is combined with tough protective coating that resists chipping and peeling. Paints come in Acrylic Alkyd Enamel, Fluorescent, and High-Heat types. They are appropriate for light to heavy-duty... Read More

Paints & Coatings

Latex Coating paints interior and exterior walls.

Apr 08, 2002

Devflex 4205 semi-gloss, waterborne, acrylic latex coating can be applied to properly prepared surfaces including drywall, wood, masonry, and metal surfaces in institutional, commercial and light industrial areas. Low-odor, low-VOC latex dries quickly and cleans up with soap and water. Non-yellowing coating applies by brush, roll or spray. It is available in white and colors. Read More

Paints & Coatings

Acrylic Enamel Paint requires only one coat.

Jan 02, 2002

Industrial Rust Tough aerosol paint provides complete coverage with 1 coat on new or clean metal, making it suitable for small touch-up jobs, painting irregular shapes, or covering hard-to-reach areas. It can be used on indoor and outdoor equipment. Paint provides high-gloss finish that resists chipping and peeling, dries to touch in 25 min, and can be handled within one hr. It is available in 26... Read More