Dispensers

Liquid Color Selection/Supply Service accelerates color creation.

ColorMatrix™ Select cloud-based liquid color selection and supply service combines liquid colorants, Web-accessed software, and automated dispensing technology. Leveraging this service and bringing it in house, companies and designers can develop colors within minutes to react to changing demands and/or achieve multi-regional consistency. Colors can be created using existing standards,...

Read More »
Two-Part Epoxy Paste has ultra low thermal resistance.
Epoxies

Two-Part Epoxy Paste has ultra low thermal resistance.

Featuring special high thermal conductive fillers, Master Bond EP48TC is two part epoxy paste that can be applied in bond lines as thin as 10-15 microns. This material offers exceptionally low thermal resistance of 5-7 x 10-6 K•m2/W, which imparts impressive heat transfer capabilities and thermal conductivity of 20-25 BTU•in/ft2•hr•°F [2.88-3.60 W/(m•K). It can be used in applications...

Read More »
Two-Part Epoxy Paste has ultra low thermal resistance.
Epoxies

Two-Part Epoxy Paste has ultra low thermal resistance.

Featuring special high thermal conductive fillers, Master Bond EP48TC is two part epoxy paste that can be applied in bond lines as thin as 10-15 microns. This material offers exceptionally low thermal resistance of 5-7 x 10-6 K•m2/W, which imparts impressive heat transfer capabilities and thermal conductivity of 20-25 BTU•in/ft2•hr•-°F [2.88-3.60 W/(m•K). It can be used in applications...

Read More »
Electrolube Introduce Conformal Coatings and Resins for Wearable Devices
Thermal Interface Materials

Electrolube Introduce Conformal Coatings and Resins for Wearable Devices

One of the challenges that wearable technology poses, is the very nature in which a device will be used, and primarily, the environments that it may be subjected to. For instance, a sensor in a wearable device has the added consideration of physical interactions; the device will be moved, worn, may see impact, may be flexed and potentially exposed to a number of additional elements, such as water...

Read More »
Electrolube Introduce Conformal Coatings and Resins for Wearable Devices
Thermal Interface Materials

Electrolube Introduce Conformal Coatings and Resins for Wearable Devices

One of the challenges that wearable technology poses, is the very nature in which a device will be used, and primarily, the environments that it may be subjected to. For instance, a sensor in a wearable device has the added consideration of physical interactions; the device will be moved, worn, may see impact, may be flexed and potentially exposed to a number of additional elements, such as water...

Read More »
Electrolube Introduce New Range of Aromatic Free Conformal Coatings to the U.S. Market
Coatings

Electrolube Introduce New Range of Aromatic Free Conformal Coatings to the U.S. Market

Electrolube, the complete solutions provider of electro-chemicals for the electronics, automotive and industrial manufacturing industries, will exhibit a new range of conformal coatings, formulated without the use of hazardous aromatic solvents, at SMTA Atlanta's 19th Annual Expo, held at the Gwinnett Civic Center on the 15th April.-  Designed for the protection of electronic circuitry, the new...

Read More »
Electrolube Introduce New Range of Aromatic Free Conformal Coatings to the U.S. Market
Coatings

Electrolube Introduce New Range of Aromatic Free Conformal Coatings to the U.S. Market

Electrolube, the complete solutions provider of electro-chemicals for the electronics, automotive and industrial manufacturing industries, will exhibit a new range of conformal coatings, formulated without the use of hazardous aromatic solvents, at SMTA Atlanta's 19th Annual Expo, held at the Gwinnett Civic Center on the 15th April.Â-  Designed for the protection of electronic circuitry, the...

Read More »
Coatings

New E-Coating from Myers Spring

Myers Spring Co., Inc of Logansport, Indiana is happy to announce that Acrylic E-Coating is now available for nearly every part they make.-  Acrylic E-Coating is a superb addition to the company’s already broad range of coating solutions. Like Epoxy E-cote, Acrylic E-Coat is an excellent conversion coating and improves corrosion protection with the added benefit of UV resistance, making it not...

Read More »
Coatings

New E-Coating from Myers Spring

Myers Spring Co., Inc of Logansport, Indiana is happy to announce that Acrylic E-Coating is now available for nearly every part they make.Â-  Acrylic E-Coating is a superb addition to the company’s already broad range of coating solutions. Like Epoxy E-cote, Acrylic E-Coat is an excellent conversion coating and improves corrosion protection with the added benefit of UV resistance, making it...

Read More »
Dorken to Exhibit Full Range of Coatings at SUR/FIN 2015
Coatings

Dorken to Exhibit Full Range of Coatings at SUR/FIN 2015

Grass Lake, MI — Dörken Corporation USA will exhibit at SUR/FIN 2015, Rosemont, IL, June 8-10, 2015 Booth No. 122 its complete line of non-chrome micro layer corrosion protection coatings. The display will feature products coated using the variety of systems available from Dörken. Highlighting the exhibit will be the DELTA PROTEKT® KL 105 and DELTA-PROTEKT® KL 120 that help minimize...

Read More »

All Topics