Paints

Anti-Static Paint protects production and employees.

By dissipating static charges in range of 107–109 Ω and carry them to ground, StaticPaint® can protect floors, walls, ceilings, countertops, and even cabinets. Application of anti-static paint to walls and ceilings can prevent dust from collecting, gathering charge, dropping into sensitive components, and releasing charge. Water-based and non-toxic, StaticPaint meets California’s low...

Read More »
Polyurethane Coating protects electronic circuitry.
Coatings

Polyurethane Coating protects electronic circuitry.

Utilizing special blend of solvents, PUCAF Aromatic Free Polyurethane Conformal Coating offers rapid touch dry time of less than 10 min. Product demonstrates optimal adhesion to many substrates and is highly resistant to mold growth and moisture. Applied by manual and selective spray processes, coating fluoresces under UV light to aid inspection. Once cured, coating can be removed with Conformal...

Read More »
Sealants

Instant Floor Coating meets needs of health care facilities.

As single-coat system, UVolve® Instant Floor Guard can be directly applied to vinyl composite tiles in health care facilities to seal and protect over extended period of time. Solvent-free coating cures instantly viaÂ- UV light, so floors are ready for traffic immediately after application. While eliminating need to frequently strip, polish, and buff, non-flammable product also reduces...

Read More »
Coatings

Kraton Brings the Big Chill to Techtextil Frankfurt 2013

Promoting NEXAR™ Cooling Technology for Performance Fabrics HOUSTON - Kraton Performance Polymers, Inc. (NYSE: KRA), a leading global producer of styrenic block copolymers and other engineered polymers will present a paper and exhibit at Techtextil, June 11-13 in Frankfurt, GermanyÂ-  highlighting  NEXAR™ polymer coatings.  Kraton will be located in Hall 3.1 booth number...

Read More »
Epoxies

Preprufe® Meets the Waterproofing Challenge at Four Mumbai Developments

When building in areas with high groundwater levels, it is absolutely vital to get the right waterproofing system in place from the start. Prevention is always better than cure, as an inadequate waterproofing system or one that fails can have disastrous consequences – from structural damage to health dangers and costly repairs. As more structures are now built near to the coast or in direct...

Read More »
Molds

WACKER Unveils Variable-Hardness Silicone Rubber for the Orthopedics Industry

Munich – WACKER, the Munich-based chemical group, will be unveiling a new silicone rubber of variable hardness for orthopedic and prosthetic applications at this year's MEDTEC Europe. SILPURAN® 2410 A/B, an addition curing silicone, can be made harder or softer in the lower Shore A range by varying the mixing ratio of its two components. This gives manufacturers the flexibility to...

Read More »
Coatings

Extreme Coatings Introduces New Products for Oil and Gas Industry and New Website

St. Petersburg, Florida. Since 1995 Extreme Coatings has offered tungsten carbide coatings to the plastics and rubber industries to extend the life of equipment.Â-  We took a technology with promise, high velocity thermal spray, and adapted it to high wear problems in the plastics industry. We have surpassed 10,000 feedscrews coated so I guess the technology is working well!" said Curt...

Read More »
Determining the Phosphorus Content and Thickness of Electroless Nickel Coatings Using XRF
Testers

Determining the Phosphorus Content and Thickness of Electroless Nickel Coatings Using XRF

Fischer Technology is pleased to announce the capability of non-destructively measuring simultaneously the phosphorous content and thickness in electroless nickel (NiP) coatings using X-ray Fluorescence Instrumentation (XRF). For the first time this capability is realized for measurements in air (vacuum free), regardless of the underlying base material, AL, Fe, Cu or PCB. Fischer’s high...

Read More »
Coatings

New Nonstick Colors Now Available in Whitford's QuanTanium® Coating

Elverson, PA. – Whitford, makers of the world’s largest, most complete line of fluoropolymer coatings, has formulated a new line of colored nonstick interiors for QuanTanium, its coating reinforced with titanium particles engineered to outlast almost anything. QuanTanium, superbly resistant to scratching, abrasion and wear, is now available in eight eye-catching colors: Mediterranean Blue,...

Read More »
Whitford Offers New Interior Nonstick Colors in its Top-of-the-Line Eterna® System
Coatings

Whitford Offers New Interior Nonstick Colors in its Top-of-the-Line Eterna® System

Elverson, PA. Whitford, makers of the world’s largest, most complete line of fluoropolymer coatings, has expanded its Eterna colors line, originally launched in February 2012. Eterna is now available in eleven colors: Raspberry Red, Deep Purple, Malbec Red, Think Pink, Spruce, Copper Penny, Copper Bronze, Golden Bronze, Chocolate Bronze, Starry Night and Blue Moon. These colors have the same...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics