Epoxy System resists temperatures up to 400-

Epoxy System resists temperatures up to 400-

Medium-viscosity, 2-component EP30HT has 4:1 mix ratio by weight, is 100% reactive, and does not contain solvents or volatiles. It cures at room temperature or more rapidly at elevated temperatures. Serving as adhesive/sealant, coating, and casting compound, product adheres to metals, glass, ceramics, woods, vulcanized rubbers, and plastics. Optically clear formula has refractive index of 1.54...

Read More »

New TRU TEMP-® Finishing System from Birchwood Casey Reduced Blackening Time from 3 Days to 34 Minutes for Command Tooling Systems

Ramsey, Minnesota: Over a third of Command Tooling Systems' toolholders require black oxide finishing, and outsourcing this function added three days to its manufacturing time. Now, using a seven tank, 100 gallon TRU TEMPÂ-® in-house blackening line from Birchwood Casey, the blackening process has been greatly reduced from days to just 34 minutes. With the Command's toolholder markets growing...

Read More »
New Superior Wolfram Carbide Coatings

New Superior Wolfram Carbide Coatings

Mytec, a world leader in the manufacturing of fully braised, rupture proof construction hydraulic expansion clamping tooling, is pleased to announce the usage of Wolfram carbide coatings for their chucks and arbors. The advantages this coating brings are: o extreme holding power with a minimum amount of expansion. o sleeve hardness of 72-Rockwell to greatly decrease wear. o coating can be applied...

Read More »
Patented Non-Stick Coating Eases Removal of Cartridge Heaters

Patented Non-Stick Coating Eases Removal of Cartridge Heaters

Durex Industries introduces a patented, high temperature coating for cartridge heaters that facilitates easy removal from precision drilled holes. The Duraslik(TM) coating is bonded directly to the heater sheath for ease of handling. This coating acts as a solid lubricant once the heater has been energized in service. There is no need for additional release agents to be applied to the heater...

Read More »
Release Coating promotes composite to fabric adhesion.

Release Coating promotes composite to fabric adhesion.

Available in 5 gal pails and 55 gal drums, mold Release Coating 7137 is effective in applications that combine composite with fabric material in permanent structure. Low-maintenance product has water base, exhibits low build for cleaner molds, and handles up to 450Â-

Read More »
Masking Material protects metal component surfaces.

Masking Material protects metal component surfaces.

Available in gel, brush-on, or spray-on formulations, SpeedMaskÂ-® UV Curable Masking Resin provides surface protection from contamination caused by acids, alkalines, plating solutions, and ambient debris from air plasma spray, HVOF, grinding, peening, and grit blasting. Single-component, temporary masking resin is solvent-free, non-flammable, urethane-based, and water-soluble, and easily...

Read More »

Rust-Oleum Offers VOC-Compliant Coatings that Meet or Exceed New SCAQMD Regulations

Vernon Hills, IL-(August 16, 2006) Beginning July 1, 2006, the South Coast Air Quality Management District (SCAQMD) reduced the permissible volatile organic compound (VOC) emissions of industrial maintenance coatings from 250 grams/liter (g/l) to 100 g/l. The SCAQMD covers Orange County and portions of Riverside, Los Angeles and San Bernardino counties. Those violating Rule 1113 emission...

Read More »

Acrylic Coating provides corrosion protection.

Organic, water-based VpCI(TM)-386 provides UV-resistance and corrosion protection for equipment, structures, and maintenance needs. It is appropriate for direct metal applications and can be used as single coat system or in conjunction with other primers and topcoats. Suited for indoor or outdoor conditions, non-toxic, low VOC system forms thixotropic coating that is resistant to sagging or...

Read More »

NORD Offers Two Options for Enhanced Protection

Waunakee, Wl - NORD Gear Corporation offers the NORD Severe Duty + (NSD+) and NORD Severe Duty Extreme (NSD-X3) coatings for advanced protection against corrosion in wet and severe environments. NORD's Severe Duty + (NSD+) and Severe Duty Extreme (NSD-X3) protective coatings ensure that NORD units are extremely well-sealed against permeating moisture, resistant to corrosion and shielded against...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics