Paints & Coatings

Related Categories
Material Handling & Storage, Paints & Coatings

Linde Expert to Present Paper at Thermal Spray Conference on the Value of Special Cooling Methods that Increase Efficiency and Quality

May 11, 2015

Linde will also have a booth to highlight LINSPRAY® processes and solutions Murray Hill, New Jersey, U.S. - A Linde paper to be presented at this year's International Thermal Spay Conference and Exposition will discuss why more and more thermal spray applications on high performance substrates require the use of special cooling methods to increase the cooling efficiency and, in turn,... Read More

Adhesives & Sealants, Paints & Coatings

Epoxy Coating suits applications above or below water.

May 04, 2015

Based on blend of liquid epoxy polymer and aliphatic polyamine curing agents, KALCOAT™ 560 can displace water from wet surfaces to make permanent bond. High build 100% solids epoxy coating is solvent-free and incorporates Kevlar® microfibers for reinforcement and viscosity management for high application rates. KALCOAT 560 can be used as anti-corrosive coating, repair compound, fairing... Read More

Materials & Material Processing, Paints & Coatings

Flux Coating helps meet flatness, tight tolerance needs.

Apr 21, 2015

Available for solder preforms, LV1000 is halide-free, meets ROL0 requirements, and passes Telcordia GR-78 testing in unactivated state. Durability of glossy, uniform coating facilitates integration of this material into automated assembly processes, while minimal voiding accommodates bottom termination components that do not allow for proper outgassing of volatized flux. With... Read More

Paints & Coatings

Digital Press Primer is optimized for flexible packaging printing.

Apr 20, 2015

Effective for flexible packaging printing applications, water-based DigiPrime® 680 is formulated for use with HP Indigo WS6X00 digital presses. This primer improves ink receptivity on films as well as printing performance on shrink sleeves, and lamination bond strength promotes durability. Existing WS6X00 presses will require upgrade kit from HP to run DigiPrime 680. Read More

Electrical Equipment & Systems, Machinery & Machining Tools, Paints & Coatings

Spellman High Voltage Electronics to Exhibit at the 2015 SVC TechCon in Santa Clara, CA

Apr 20, 2015

Hauppauge, New York – Spellman High Voltage Electronics Corporation, the world’s leading manufacturer of custom high voltage power conversion products, announces it will exhibit at the upcoming 58th Annual Society of Vacuum Coaters (SVC) TechCon, April 28-29, at the Santa Clara Convention Center in Santa Clara, CA. Spellman sales and engineering staff will be present in Booth #1712 to... Read More

Machinery & Machining Tools, Material Handling & Storage, Paints & Coatings

Nordson ASYMTEK Dispensing and Coating Equipment and Process Technologies to be Featured at Kintner Equipment Corporation Workshop

Apr 15, 2015

Electronics Manufacturing Workshop to be held in Endicott, New York, April 21-23, 2015 Carlsbad, CA, USA – Nordson ASYMTEK, a Nordson company (NASDAQ: NDSN), a global leader in dispensing, jetting, and coating equipment and technologies, announces that it will partner with Kintner Equipment Corporation to conduct workshops on PCB manufacturing processes, on April 21-23, 2015 at the Kintner... Read More

Machinery & Machining Tools, Paints & Coatings

Conformal Coating System combines repeatability, high throughput.

Apr 15, 2015

Featuring conformal coating and dispense valves that move smoothly along 3-axis system, Precisioncoat V delivers accuracy, repeatability, and throughput for automated material application. Multi-valve technology allows for application of dots, lines, fills, glob tops, and spray coat areas, and option to add fully programmable fourth and fifth axes allows for tilt and rotation capabilities.... Read More

Materials & Material Processing, Paints & Coatings, Services

Paint and Powder Coating on Lead Is Great Protection

Apr 14, 2015

Paint and powder coatings on lead are very effective coatings to protect and encapsulate lead products. Many people do not realize that lead can be powder coated because of the baking process used to cure the powder but it can be applied and provides a very tough coating. Lead is very heavy and soft making it easy to damage. If coatings are improperly applied, paint flaking can occur. There are... Read More

Paints & Coatings

Processing System delivers 2 unique finishes.

Apr 08, 2015

Operating with Near-Zero™ water consumption, Dual Process Line produces black oxide finish using TRU TEMP® low temperature process, and fine-grained zinc phosphate coating using MICROLOK® MZN process. System consists of 10 tanks with 100-gallon capacity, Near-Zero™ water recycler, and Ion Exchange water purifier. Using common tanks, both blackening and zinc phosphate processes can... Read More

Adhesives & Sealants, Paints & Coatings

Two-Part Epoxy Paste has ultra low thermal resistance.

Apr 07, 2015

Master Bond EP48TC has thermal resistance of 5–7 x 10–6 K•m2/W, which enables thermal conductivity of 20–25 BTU•in/ft2•hr•Â°F. Applied in bond lines as thin as 10–15 microns, epoxy paste has tensile lap shear strength from 900–1,100 psi and bonds to metals, composites, glass, ceramic, and plastics. Working life for 100 gram batch at 75°F is 90–120 min. Curing at room... Read More

Chemicals & Chemical Processing, Paints & Coatings

New E-Coating from Myers Spring

Apr 02, 2015

Myers Spring Co., Inc of Logansport, Indiana is happy to announce that Acrylic E-Coating is now available for nearly every part they make.  Acrylic E-Coating is a superb addition to the company’s already broad range of coating solutions. Like Epoxy E-cote, Acrylic E-Coat is an excellent conversion coating and improves corrosion protection with the added benefit of UV resistance, making it... Read More

Materials & Material Processing, Non-Industrial Products, Paints & Coatings

Formulate Nail Gel Coatings that Look Salon-Fresh Longer

Mar 30, 2015

Bomar™ Oligomers Overcome Nail-Coating Issues Torrington, Connecticut – Dymax Oligomers Coatings, formerly known as Bomar Specialties, offers a line of Bomar™ oligomers for use in formulating LED-curable nail gel coatings.  The oligomers help to overcome common nail coating issues such as low gloss, color drift, regulatory compliance issues, premature chipping, and high heat generation... Read More

Green & Clean, Paints & Coatings

Paint Finish mimics look/feel of terra cotta on aluminum panels.

Mar 25, 2015

Intended for application to architectural wall panels, paint finish comes in 14 faux terra cotta colors. Texture additive helps replicate natural feel of terra cotta, while 70% PVDF resin-based coating optimizes exterior environment performance. Finish meets requirements of AAMA 2605-13 and exhibits resistance to humidity, color change, chalk, gloss loss, and chemicals. Solution can be specified... Read More

Construction Equipment and Supplies, Paints & Coatings

End of Winter Could Mean Leaky Roofs and the Need for Repairs and Coatings

Mar 20, 2015

Flat roofs that are found at plants, factories and other industrial buildings will almost inevitably end up with leaks at some point in their history.  Pumpcoat~PCI Contractors gets several calls for leaks, roof repairs and coatings each season. Areas on roofs where something sticks up from the roof  - like piping, vents, exhaust fans, etc. are called penetrations. Anywhere there is a... Read More

Paints & Coatings

Anodized Powder Coatings meet AAMA 2604 specifications.

Mar 20, 2015

Designed for architectural applications where anodized look is desired, TruAnodize smooth, low-gloss powder coatings apply in one coat, do not require clear coat, and meet AAMA 2604 specifications. There are 6 stock products available that offer appearances to match as many anodized colors: Light Bronze LR, Dark Bronze LR, Dark Bronze DR, Champagne LR, Black, and Bonded Clear. Applications... Read More

Mechanical Power Transmission, Paints & Coatings, Services

Powder Coating: a Vital Element of Actuators Manufacturing

Mar 05, 2015

Powder coating uses finely ground particles of pigment and resin that are electrostatically charged and sprayed onto electrically grounded parts using a dry finish process. There are two types of powder coating including thermoplastic and thermosetting. Indelac Controls, Inc uses the thermosetting process. We will later learn the unique color Indelac Controls uses. Thermoplastic powders are able... Read More

Paints & Coatings, Printing & Duplicating Equipment

Michelman Featuring Digital Press Primer that Improves Print Quality on Xeikon Presses

Mar 04, 2015

CINCINNATI, OH – Michelman will be featuring DigiPrime® 4453 digital press primer formulated for use on Xeikon digital presses at the Xeikon Café event taking place March 10-12, 2015 in in Antwerp, Belgium.  DigiPrime 4453 is a water based, water resistant primer that promotes adhesion of Xeikon electrophotographic toners to most paper and film substrates.  It is particularly... Read More

Paints & Coatings

High-Temp Corrosion-Resistant Coating enhances motor housings.

Mar 03, 2015

Used to coat steel motor housings in applications to 400°F, Corr-Paint™ CP2000 dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. Single-part polymeric coating, resistant to acids, also survives salt fog, salt spray, and humidity testing periods of 1,000+ hr. Typically applied in 4.0 mil wet film thickness that dries to ~2.0 mil, coating has 200–240 cP... Read More

Paints & Coatings

Clear Glass Coat from DeVilbiss Automotive Refinishing

Mar 03, 2015

DeVilbiss® introduces the all-new DeVilbiss CLEAN™ Clear Glass Coat. Water based and easy to use, the Glass Coat is a protective coating for indoor spray booth glass surfaces. Designed for easy application and removal, Glass Coat is durable and long lasting. DeVilbiss CLEAN™ Clear Glass Coat is available for immediate purchase in the United States and Canada. DeVilbiss Automotive... Read More