High-Temperature Paint provides corrosion protection.
Coatings

High-Temperature Paint provides corrosion protection.

Single-part, aluminum-rich Corr-Paint(TM) CP4010 ceramic-silicone based coating protects steel components and structures for applications to 1200 deg F. It is resistant to acids, bases, and solvents, and provides thermal-shock, salt-spray, and UV resistance. Water-dispersible coating dries at room temperature and cures fully during operation at temperatures above 450 deg F. Non-flammable, low VOC...

Read More »
Powder Coat Paint adheres to steel.
Paints

Powder Coat Paint adheres to steel.

PowderCoatplus(TM) powder coat paint on cold rolled steel is rust resistant, is environmentally sound, and adheres to edges. System involves 3 steps: pretreatment for removing lubricating oils from steel surface, 2 mil thick coating of powder coat enamel applied in automated electrostatic spray booth, and baking finish to hard surface. Paint resists salt spray and impact tests.

Read More »
Finishing System produces product in 10 to15 minutes.
Finishes

Finishing System produces product in 10 to15 minutes.

BK-TT Mini TRU TEMP(R) part finishing system utilizes black process to provide corrosion protection on castings and powdered metal parts. Two-step chemistry creates black magnetite finish, which is Mil Spec compliant, measures .000020 in. thick, and can withstand 100 to 300 salt spray exposure. Supplied as turnkey system, components include 7 tanks and covers, 2 hot plates, and all chemicals...

Read More »
Marking Paints work on most surfaces.
Paints

Marking Paints work on most surfaces.

Krylon(R) Industrial Quik-Mark Inverted Marking Paints have Spray-Thru(TM) cap and non-clogging spray tip that create bright, highly-visible markings on concrete, pavement, gravel, grass, soil, brick, asphalt, and excavation sites. Also available are APWA solvent-based marking caulks, for temporary markings up to 30 days. They can be removed from hard surfaces with wire brush and water....

Read More »
Paints

Latex Coating paints interior and exterior walls.

Devflex 4205 semi-gloss, waterborne, acrylic latex coating can be applied to properly prepared surfaces including drywall, wood, masonry, and metal surfaces in institutional, commercial and light industrial areas. Low-odor, low-VOC latex dries quickly and cleans up with soap and water. Non-yellowing coating applies by brush, roll or spray. It is available in white and colors.

Read More »
Document Handler laminates and binds.
Laminators

Document Handler laminates and binds.

Tandem+ Deluxe Personal Laminator/Document Binder incorporates 2-roller pouch laminator, thermal binding station, and cooling station. It can laminate and protect documents up to 9 in. wide and 5 mils thick. It binds up to 120 pages of letter size or A4 covers. Applications include professionally finishing graphic presentations such as signs, POP displays, certificates, posters, countertop signs,...

Read More »
Primers

Reformulated Primers have lower VOCs.

Improvements to Enviroline(R) 58 and Enviroline(R) 59 include easier mixing, lower VOCs, no need for special thinners, and color changes. Enviroline 58 is now available in tan for greater contrast from IECC topcoats, and Enviroline 59 is lighter color to increase hiding ability of Envirothane(TM) 535 Urethane topcoat. Enviroline 58 is epoxy polyamide rust inhibitive primer; Enviroline 59 is for...

Read More »
Floor Coating resists dirt and abrasion.
Coatings

Floor Coating resists dirt and abrasion.

Concord(TM) polyurethane high gloss enamel resists mild acid and alkali fumes, oil, grease, gases, steam, dirt and abrasion. It is USDA approved for surfaces where there is possible food contact in facilities operating under Federal Meat and Poultry Products Inspection Program. Coating rolls or brushes on and dries to hard, crystal-clear or color finish that is easy to clean and maintain. It...

Read More »
Black-Body Coating is odorless and water-soluble.
Coatings

Black-Body Coating is odorless and water-soluble.

With emissivity greater than 0.90, HiE-Coat(TM) 840-C coating improves thermal efficiency of combustion and exhaust pipes as well as oven and furnace walls to 2500° F. Coverage rate is approximately 500 sq ft/gal (2 mil dry film thickness), and curing is accomplished in operation or by heating for 1-2 hours at 2000° F. HiE-Coat 840-M is used for coating carbon and stainless steel...

Read More »

All Topics