Chromate Coating stops corrosion, meets auto maker specs.
Coatings

Chromate Coating stops corrosion, meets auto maker specs.

FisherCoteIII trivalent chromate-based coating can be used as alternative to hexavalent chromium. Low toxicity, hexavalent-free coating complies with requirements specified by Ford and GM. It meets minimum 96 hr continuous salt spray protection as specified in ASTM Standard B 117, can be sealed for increased corrosion resistance, and protects ZAMAK(TM) 2, 3, and 5, ZA-8(TM) and ACuZinc® die...

Read More »
Polymers repair and prevent corrosion under insulation.
Coatings

Polymers repair and prevent corrosion under insulation.

Heat-activated Belzona® 1251 (HA-Metal) and Belzona® 5851 (HA-Barrier) repair and protect metal surfaces suffering from Corrosion Under Insulation (CUI). They apply directly onto hot surfaces, from 158 to 302°F. Both are single component and solvent free. Belzona 1251 paste-grade product rebuilds corroded areas and can be applied with spatula or applicator. Belzona 5851...

Read More »
Blacktop Coating System absorbs halogen lamp intensity.
Coatings

Blacktop Coating System absorbs halogen lamp intensity.

Quartz-Coat(TM) 845-S high temperature, sprayable, blacktop coating system has ceramic-metallic formulation that bonds to glass and quartz lighting fixtures. Single-component formulation is aqueous-based and inorganic, pigmented with deep black, temperature-stable filler. Stable in applications to 2000°F, Quartz-Coat 845-S offers viscosity range of 400-700 cps and has 42.0% solids content...

Read More »
Polyurethane Coating provides waterproof surface.
Coatings

Polyurethane Coating provides waterproof surface.

Tigerdeck(TM) coating system protects high traffic concrete, wood, and metal substrates that need flexible, chemical resistant coating. Since coating is flexible, it allows substrate to move with changes in temperature and humidity without cracking or popping off. Elastomeric, seamless waterproof membrane prevents moisture attack that causes damage to any slab. Coating has low odor and comes in...

Read More »
Copolymer Coatings provide environmental compliance.
Coatings

Copolymer Coatings provide environmental compliance.

Imron® Waterborne Polyurethane Copolymer coatings includes primers, satin-gloss DTM (direct-to-metal), high-gloss topcoats, and flat clear topcoat. Single-component coatings are free of Hazardous Air Pollutants and low in VOC with less than 1.8 lbs/gal. They reach hard dry in 2 hrs and can be re-coated in 30 min. Products can be applied to steel, aluminum, galvanized steel, concrete,...

Read More »
Floor Coating cures quickly to reduce downtime.
Coatings

Floor Coating cures quickly to reduce downtime.

FASTCURE(TM) coating system sets up in temperatures as low as 45°F, in as little as 10 to 12 hours. High-build, impact-resistant epoxy system achieves full chemical resistance in as little as 3 days. Coating is low odor and VOC compliant, as well as OSHA compliant, USDA authorized, and EPA approved. FASTCURE(TM) coating provides easy-to-clean gloss finish.

Read More »
Ceramic Coating seals thermal spray coatings.
Sealants

Ceramic Coating seals thermal spray coatings.

Ceramacoat(TM) 503-VFG-S ceramic-based sealant is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically resistant, inorganic material does not outgas or decompose in high temperature corrosive applications to 3200°F. Applied using sponge brush or pneumatic spray equipment, full cure is achieved after exposure for 1-2 hours at 700°F. It sinters and...

Read More »
Coating is indestructible and blast resilient.
Coatings

Coating is indestructible and blast resilient.

Super-Cote(TM) bonds directly to metal surfaces, providing strong resistance to abrasion, cracking, chipping, peeling, or scratching. It has high UV resistance and does not deteriorate from heat or cold. Coating also provides airtight, watertight permanent protection against formation of rust and corrosion. Super-Cote is suitable for use on haz-mat and haz-waste steel chemical storage buildings.

Read More »
Release Agents

Mold Release Coating suits rotationally molded resins.

Frekote® Aqualine Rotolease(TM) water-based, non-flammable release agent is designed to provide multiple releases per application with no contaminating transfer. It can be applied to molds at any temperature between room temperature and 205°C. Release agent chemically bonds to mold surface to form micro-thin, chemically resistant coating. Rotolease contains no CFCs and no chlorinated,...

Read More »

All Topics