Coatings

Wear-Resistant Compounds protect equipment from abrasion.

Wear Guard(TM) alumina ceramic bead-filled epoxy putties provide resistance to acids, bases, saturated salt solutions, oils, and other chemicals and withstand operating temperatures up to 300°F. High Temp version provides protection at temperatures up to 450°F. Combo Wear FC is reinforced with 2 different bead sizes plus silicon carbide and cures in 90 min. Backing Compounds are epoxy...

Read More »
Acrylic Paint provides one-coat, high-build finish.
Paints

Acrylic Paint provides one-coat, high-build finish.

Single-component Fast Clad(TM) HB Acrylic cuts costs in new construction and maintenance projects by eliminating need for two- or three-coat systems. Coating provides 5-8 mils DFT when applied over zinc-rich primers. It can also be applied over other primers and directly to prepared steel. Paint offers early moisture resistance and dries to touch in one hour at 77°F. Applications include...

Read More »
Masks and Masking

Developer/Replenisher prevents formation of scale.

One-step Type DR-502CX aqueous developer concentrate contains cleaning agents that prevent hard water deposits. It is formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DR-502CX provides alternative for solder mask developing applications where there is high consumption.

Read More »
Epoxy Floor System provides look of granite.
Coatings

Epoxy Floor System provides look of granite.

PolyMax DCS consists of high solids epoxy primer/sealer into which blend of vinyl chips is distributed to leave granite looking surface. Surface is sealed with chemical and UV resistant gloss lock coat and finish. PolyMax is non porous, has no grout joints and can be installed with smooth or textured finish. It can be made slip resistant for wet environments, and offers low maintenance, abrasion...

Read More »
Coatings

Coating suits dry machining of aluminum alloys.

Diamond-Like Carbon Coating (DLC) features corrosion resistance and low wear rate. Inserts coated with DLC have low friction coefficient of Â-µ=0.05-0.2, even without lubricants. Aluminum alloy adhesion on edge can be suppressed even in dry machining, thereby decreasing cutting resistance. Chips are removed well, preventing cutting material from being scratched and deterioration of machined...

Read More »
Coating System protects high traffic areas.
Coatings

Coating System protects high traffic areas.

Able to withstand constant fork lift and other heavy traffic, Tigershield(TM) self-leveling formula is suitable for use on spalled and damaged concrete. Application requires users to pour product on and squeegee out to smooth surface. Thick coating gets into cracks and creates seamless flooring, impervious to dirt and bacteria. System withstands exposure to chemicals and heavy abrasion, complies...

Read More »
Aerosol Paints suit touch-ups and hard-to-reach places.
Paints

Aerosol Paints suit touch-ups and hard-to-reach places.

Tough Coat® aerosol paints have fan-shaped spray pattern for maximum coverage. With turn of nozzle insert, EZ TOUCH® FANSPRAY® Nozzle pattern goes from vertical to horizontal. High-solids coverage is combined with tough protective coating that resists chipping and peeling. Paints come in Acrylic Alkyd Enamel, Fluorescent, and High-Heat types. They are appropriate for light to...

Read More »
Tungsten Carbide Applicator extends life of tools up to 1000%.
Coating Equipment

Tungsten Carbide Applicator extends life of tools up to 1000%.

Carbitron 300 consists of adjustable power supply and vibration hand tool. Tungsten-Carbide deposition layer forms true metallic bond with work surface with hardness of 78-80 Rockwell C. Thickness of deposition layer is controlled by discharge intensity selector on power supply and may be varied from 0.0002 to 0.001 in. in increments of 0.0002 in. Process protects wear surfaces, and improves...

Read More »
Coatings

Tin Etch Resist suits tank or flood systems.

TINCOTE 333 immersion tin etch resist replaces electroplated tin or tin/lead in Chemelex line of printed circuit chemistry. It produces flat, uniform deposit thickness, and may be replenished with tin and stabilizer components TINCOTE 333-S and TINCOTE 333-T.

Read More »
Chromate Coating stops corrosion, meets auto maker specs.
Coatings

Chromate Coating stops corrosion, meets auto maker specs.

FisherCoteIII trivalent chromate-based coating can be used as alternative to hexavalent chromium. Low toxicity, hexavalent-free coating complies with requirements specified by Ford and GM. It meets minimum 96 hr continuous salt spray protection as specified in ASTM Standard B 117, can be sealed for increased corrosion resistance, and protects ZAMAK(TM) 2, 3, and 5, ZA-8(TM) and ACuZinc® die...

Read More »

All Topics