Epoxy Flooring is self leveling and water based.
Coatings

Epoxy Flooring is self leveling and water based.

Dex-O-Tex Cheminert VP 2-component, jointless flooring system is breathable and vapor permeable. It is micro porous, which enables it to be applied on concrete that is emitting Moisture Vapor Transmission levels up to 10 lb/1,000 sq ft in 24 hrs. Typical applications range from nominal thickness of 3/32-1/8 in. Product features 45 min pot life and can be walked on in 24 hrs. It handles heavy...

Read More »
Reflective Coating is UV-VIS enhanced.
Coatings

Reflective Coating is UV-VIS enhanced.

No. 3000-SI Al+SiO2 optical coating is optimized for maximum UV reflectance with greater than 89% reflectance from 250-300 nm, and broadband reflectance of 200-700 nm. Coating survives mil-spec adhesion and temp/humidity cycling and is more durable than conventional UV Al+MgF2 coatings. It is suited for N2 laser use and for analytical applications that require stability and UV-VIS reflectance....

Read More »
Sensors / Detectors / Transducers

Transducers and Coating meet governmental/facility edicts.

Oil filled pressure transducers, suited for food and medical extrusion markets, meet FDA requirements 21 CFR 178.3620, 21 CFR 172.878, and 21 CFR 573.680 as well as H1 status from USDA. DyMax(TM) proprietary coating for melt pressure transducer diaphragms adds abrasion resistance without limiting performance. Product does not add to thickness of machined, high-grade stainless steel transducer...

Read More »
Fluoropolymer Linings provide protective coating on ships.
Coatings

Fluoropolymer Linings provide protective coating on ships.

FluoroGrip(TM) linings are made of DuPont Teflon® and offered in rolls of film offering peel-and-stick installation. They have no VOCs or hazardous solvents, making them safe to apply over various substrates including steel and metals. Linings offer chemical resistance to withstand repeated cleanings. They remain effective over expanding, contracting, and flexing substrates. Applications...

Read More »
Floors

Flooring Systems are flexible, seamless, and waterproof.

Two-component, 100% solids, pigmented, polyurethane-base Soft Floor Systems are suitable for balconies, ramps, locker rooms, hospitals, and skating rinks. Soft Floor 6000 is topped with polyurethane or pigmented Polyurea. It can be applied between 10 and 250 mils in one pass without bubbling due to out gassing. Soft Flake 6001 is broadcast with colored vinyl flakes and top coated with clear...

Read More »
Coating suits high temperature, industrial applications.
Coatings

Coating suits high temperature, industrial applications.

Corr-Paint(TM) CP4020 gray-pigmented coating seals and protects steel components and structures in applications up to 1100°F. Single-part, silicone based, water-dispersible coating system adheres to sandblasted and marginally prepared surfaces. Product dries at room temperature, curing as coated structure achieves operating temperature. Resultant coating is color stable and resistant to...

Read More »
Rubber

Coatings are suitable for resurfacing floors and walls.

Based on pure polyurea, Tough-Cote URC, Tough-Cote URM, and Tough-Cote URR are seamless, flexible coatings that offer water- and chemical-resistance. Products are 100% solids, 2-component, pure polyurea elastomers, and can be applied at temperatures from -40 to +350°F. Coatings, formulated with UV stabilizers, can be applied to metal and roofing substrates, including concrete, foam, and...

Read More »
Chemical Primers

Coating System provides zinc primer, epoxy, and urethane.

Moisture-cured urethane MC 104, with zinc-dust additive, cures by reacting with moisture in air. It is applicable in shop or field by spray or rolling. With high solids content (82%), CM 15 ivory-colored epoxy is suitable for spray applications. It offers some internal flex to allow for substrate expansion/contraction. Gloss white Acrylic Poly 2-part acrylic polyurethane topcoat offers high...

Read More »
Urethane requires only one coat.
Sealants

Urethane requires only one coat.

High-build, fast-drying, direct-to-metal Fast Clad(TM) DTM Urethane can be applied at 6-9 mils DFT in single coat with no outgassing or pinholing. Urethane dries in 1 hour as corrosion-resistant finish and may be applied at temperatures as low as 35°F, with airless spray equipment, brush, or roller. Coating has 2-hour potlife at 77°F and is for use directly over properly prepared...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics