Floor Coating Systems reduce facility downtime.
Coatings

Floor Coating Systems reduce facility downtime.

FASTCURE(TM) coating systems utilize rapid-cure formula that sets up in temperatures as low as 45°F in as little as 10-12 hr and attains full chemical-resistance in 3 days (min). Impact-resistant, low-odor epoxy systems are VOC and OSHA compliant, USDA authorized, and EPA approved. They provide glossy finish and are packaged in kits that include all necessary components and detailed...

Read More »
Refractory Coating withstands temperatures to 2,300°F.
Coatings

Refractory Coating withstands temperatures to 2,300°F.

Pyro-Paint(TM) 634-AS alumina-silica-filled, fiber-reinforced, ceramic coating bonds, coats, and seals graphite and refractory materials used in molten metal fluid handling components. It also coats and insulates graphite impellers, preventing oxidation and corrosion of graphite at melt line. With 400-700 cps viscosity range, it is resistant to wetting by non-ferrous molten metals,...

Read More »
Antique Finishes provide accurate coloration.
Finishes

Antique Finishes provide accurate coloration.

Antique Finishes provide range of colors and tones on most metal surfaces including steel, brass, bronze, copper, pewter, aluminum, silver, nickel, and zinc. Color ranges can include black, golden to chocolate browns, and other red or green color variations, depending on application. Processes are operator-friendly, utilizing room temperature solutions that produce no fumes. Finishes are suited...

Read More »
Industrial Grade Enamel Coating has no odor.
Enamels

Industrial Grade Enamel Coating has no odor.

Beyond(TM) Multi-Purpose Enamel produces no VOCs and no hazardous air pollutants, allowing users to paint in confined spaces without risks associated with solvent odors and flammability. Coating can be applied on metal, concrete, masonry, wood, drywall, and tile by brush, roller, or spray gun. It is fast drying and offers color and gloss retention. Product is suited for indoors and out and comes...

Read More »
Adhesive and Coating withstands temperatures to 2,400°F.
Adhesives

Adhesive and Coating withstands temperatures to 2,400°F.

Ceramacoat(TM) 512N high-temperature adhesive and ceramic coating system is used in assembly of ceramic, metal, and plastic electrical components and as coating of high temperature structures requiring corrosion protection. Single part, water-based, silica-filled system offers volume resistivity of 109 ohm-cm and dielectric strength of 250 V/mil at room temperature. Odorless product contains no...

Read More »
Underfill Material is formulated for flip chip packaging.
Epoxies

Underfill Material is formulated for flip chip packaging.

Hysol® FP4580 low stress liquid epoxy prevents cracking and delamination of chip's inner layers. It works on copper/low k flip chip laminate packages up to 50 x 50 mm with over 4,000 solder bumps. When fully cured, product forms rigid, low warp seal that dissipates stress on solder joints and extends thermal cycling performance. Hysol® FP4580 underfills devices with gaps as small as...

Read More »
Reflective Aerosol Coating improves low-light visibility.
Coatings

Reflective Aerosol Coating improves low-light visibility.

REFLECT-A-LITE(TM) paint consists of clear, reflective, aerosol coating that can be applied to items without obscuring original or daylight color. It directly reflects light from flashlights or headlights to increase visibility in the dark, under emergency lighting conditions, or in areas with low ambient light. Product may be applied to rough and complex shapes not suited for reflective films...

Read More »
Water-Borne Coating removes with alkaline cleaners.
Coatings

Water-Borne Coating removes with alkaline cleaners.

Using advanced green chemistry, VpCI®-391 coating provides medium- to long-term outdoor protection and exhibits salt, humidity, and UV resistance. Environmentally friendly coating consists of non-toxic organic inhibitors formulated with water-based acrylic polymer. It provides low VOC that dries to tack-free coating in 30-60 min. Clear coating protects all types of steel and aluminum for up...

Read More »
Epoxy Floor Resurfacer creates chemically resistant surface.
Resurfacers

Epoxy Floor Resurfacer creates chemically resistant surface.

Non-shrink TREFLITE(TM) bonds to concrete, wood, steel, aluminum, glass, and ceramic surfaces to provide nearly indestructible finish to old and new floors. Resistant to thermal and physical shock, abrasions, acids, alkalis, and solvents, product also resists steel-wheel traffic with compressive strength of 14,000 psi. Resurfacer is 100% non-skid, even when wet, and no special tools or skills are...

Read More »
Polyurethane Coatings provide waterproof surface.
Coatings

Polyurethane Coatings provide waterproof surface.

Tigerdeck(TM) flexible, watertight, polyurethane coating systems protect high traffic concrete, wood, and metal substrates that require chemical resistance. Since multi-layer systems are flexible, they allow substrate to move with changes in temperature and humidity without cracking or popping off. Elastomeric, seamless membrane prevents moisture attack that causes costly damage to any slab....

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics