Coatings

Coatings are offered in low-temperature cure versions.

Usable at temperatures down to 32Â-ºF, Enviroline 375LT high-solids epoxy will cure in 5 days. Enviroline 376F-30LT and Enviroline 376F-60LT are 100% solid epoxy coatings that cure in 7 days at 20ºF or one day at 45ºF. Each epoxy is suited for use as lining for storage tanks, process tanks, pipelines, and concrete containment areas in petroleum, chemical processing, and...

Read More »
Concrete/Masonry Sealer offers one-step application.
Sealants

Concrete/Masonry Sealer offers one-step application.

Water-based All-Shield® Concrete & Masonry Sealer stops water penetration and damage in concrete, masonry, brick, block, stone, tile, stucco, and adobe. Clear, non-yellowing, VOC compliant formula allows substrate to breathe and water vapor to escape, providing protection for up to 8 years. Mold and fungus resistant, it also protects against freeze/thaw cycles, efflorescence, and alkali....

Read More »
Metallic Paint withstands 1,200°F and temperature cycling.
Paints

Metallic Paint withstands 1,200°F and temperature cycling.

STEEL-IT® High Temp No. 7156 features 316 stainless steel leafing pigment and other metallic components which create finish that withstands up to 1,200°F, salt air, and water. Combining heat-resistance and corrosion-resistance in single coating, chip-resistant paint withstands oil spills and wash-downs and is suited for restoring exhaust headers and preventing rust. It is available in...

Read More »
Ceramic-Based Coating seals thermal spray coatings.
Coatings

Ceramic-Based Coating seals thermal spray coatings.

Ceramacoat(TM) 503-VFG-C high-temperature sealant fills micro-porosity in corrosion protective, thermal spray coatings. It is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically-resistant, inorganic material will not outgas or decompose in high-temperature, corrosive applications up to 3,200°F. Product is applied using sponge brush or pneumatic spray...

Read More »
Coatings

Glass Coating offers alternative to acid etching.

Available in frosted patterns, water-based Aqua-444UV bonds chemically to glass, eliminating need for high-temperature baking. It can be used to alter one or both surfaces of glass to scatter or diffuse reflected portion of visible light. Low VOC formulation is based on lead-free and cadmium-free glass. It will not yellow or fade under direct sunlight and offers chemical, water, and abrasion...

Read More »
Coatings

Glass Coating comes in frosted patterns.

Water-based Aqua-333UV bonds chemically to glass, eliminating need for high-temperature baking. It will not yellow or fade under direct sunlight, and offers chemical, water, and abrasion resistance as well as UV blocking properties. Low VOC formulation is based on lead-free and cadmium-free glass. It is suited for decoration of automotive windshields, glass-topped stoves and oven doors, as well...

Read More »
Coatings

Frosted Glass Coating provides low temperature cure.

Water based Aqua-222, suitable as alternate to acid-etching process for surface alteration of glass containers, cures in 10 min at 350°F in convection oven and in 2.5-3 min at 350°F in IR oven. Low VOC formulation, which bonds chemically to glass, is based on lead-free, cadmium-free glass combined with proprietary processing to create final imitation etches enamel system. Product is...

Read More »
Release Coatings leave no adhesive residue.
Coatings

Release Coatings leave no adhesive residue.

Available on variety of films and papers up to 82 in. wide, Non-Silicone Release Coatings are designed for applications where residue that might contaminate material or process cannot be left behind. They are offered on films from 0.25-30 mil thick and papers ranging from tissue to polypropylene-coated Kraft 44-100 lb weight. Applications include label printing, specialty tapes, and film casting.

Read More »
Concrete Flooring System is resistant to thermal shock.
Floors

Concrete Flooring System is resistant to thermal shock.

Ultra-Tread provides users with polyurethane modified concrete flooring system designed to withstand chemicals such as organic and inorganic acids, alkalis, and various solvents. It is offered in 3 variants: Series 243 Ultra-Tread V (vertical); Series 244 Ultra-Tread M (mortar); and Series 245 Ultra-Tread S (slurry). Available in gray and red, each impact-resistant flooring product is...

Read More »
Seamless Epoxy Floor Resurfacer covers damaged floors.
Resurfacers

Seamless Epoxy Floor Resurfacer covers damaged floors.

POUR-N-WALK(TM) self-leveling, epoxy strength floor resurfacer has 100% solids formula that provides smooth, glossy, uniform surface that covers spalled and damaged concrete floors. Able to withstand impact and thermal shock of high traffic, product features density that makes product resistant to dirt and bacteria. Application requires user to mix, pour, and finish with notched squeegee. No...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers