Coatings

Coating protects pipelines from corrosion.

Containing no solvents, CHEMTHANE 2261 100% solids, zero VOC, 2-component polyurethane coating can be air-sprayed directly in thicknesses from 40-60 mils without additional primer. It features Shore D hardness of 75 and cure time of less than 5 minutes at 77°F. Formulated to have balance between cold-temperatures and heat resistance, coating resists cracking and delamination while also...

Read More »
Coatings

Carbide Coating lessens wear for shear bars and knives.

Able to be applied 2 ways with thicknesses from 0.002-0.100 in., BrazeCoat(TM) is low-porosity (less than 1%) hardfacing material with carbide densities up to 70% by volume embedded in metallic matrix. Metallurgically bonded to base metal, resulting coating can achieve over 65 Rockwell C hardness values to withstand abrasive wear in high-impact applications. Actual coating particles can be...

Read More »
Topcoat strengthens underlayment-to-floor covering bond.
Coatings

Topcoat strengthens underlayment-to-floor covering bond.

Featuring built-in color identifier to comply with ASTM standards, Hacker TopCoat strengthens bond between Hacker floor underlayments and floor covering adhesives. Product serves to enhance surface of underlayments and prepares surface for application of finished floor coverings. Underlayments can receive coating of ASTM F 2419-compliant TopCoat soon after application, and finished floor...

Read More »
Finishes

Polymer-Based Finishing Solution promotes wear resistance.

Super-Finishing produces low roughness while hardening metal surface using single mechanical process. Mechanical lapping process creates organic layer that bonds into metal surface through chemical reaction, affecting surface roughness average, mean roughness depth, amplitude, and bearing area curve. Environmentally friendly solution does not use hazardous waste materials and can be applied to...

Read More »
Coatings

Concrete Coating tolerates harsh industrial environments.

Thermakrete(TM) urethane coating shields industrial floors against thermal shock in -10 to +240°F temperature range. Capable of seamlessly expanding and contracting to resist cracking, it withstands caustic washdowns, heavy traffic, abrasion, chemicals, and standing water contamination. Each 3-component kit cures in less than 72 hr without need for primer or sealers. Available in 3/16 or...

Read More »
Aqueous Conformal Coating protects electronic circuitry.
Coatings

Aqueous Conformal Coating protects electronic circuitry.

Water-based Aquacoat Plus eliminates need for extraction and other precautions required for application of solvent-based conformal coatings. Non-flammable, low-VOC product contains no isocyanates and can be soldered through without producing toxic gases. Based on polymeric materials, phenol-free product is non-corrosive to cadmium and zinc plate. It comes in 2 formulations: WBP as standard and...

Read More »
Coatings

Coating provides high-temperature corrosion resistance.

Single-part, aluminum-rich Corr-Paint(TM) CP2010 polymeric coating provides corrosion resistance on steel components exposed to oxidation and corrosive atmospheres to 400°F. It dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. Product is resistant to hydrochloric, nitric, ethylene chloride, and sulfuric acids, and also survives salt fog, salt spray, and...

Read More »
Coatings

Non-Slip Coatings comply with OSHA regulation 1926.75.

Designed to meet needs of steel fabrication industry, Intershield single pack non-slip polymer coatings are pre-mixed with precise amount of aggregate for application directly from can. Solvent-based Intershield 584 suits fabricators not impacted by strict VOC regulations, while Intershield 584HS complies with VOC regulations. Water-based Intershield 571 ultra-low VOC solution is formulated in...

Read More »
Inhibitors

Treatment System eliminates rust from metal parts.

Clean, Preserve and Protect (CPP) Program restores metal parts and equipment to operational specification, preventing disposal and subsequent replacement costs. Designed for use where sandblasting is not applicable, 3-step treatment system utilizes chemistries to remove corrosion from metal parts, clean parts, and preserve restored parts. Program is available in various systems, including...

Read More »
Masks and Masking

Masking Material is resistant to high temperatures.

Suited for finishing industry, Flex500Plus material provides high-temperature masking protection in powder coating, plating, painting, anodizing, and chemical processing applications. It is designed to withstand service temperatures beyond 500°F and addresses all requirements of traditional finishing processes. Use of product in molding process results in parts that combine high temperature...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers