Nordson ASYMTEK Demonstrates NexJet Jetting System with One-Piece Genius Jet Cartridge at IPC APEX Booth 3115
Hose

Nordson ASYMTEK Demonstrates NexJet Jetting System with One-Piece Genius Jet Cartridge at IPC APEX Booth 3115

System improves precision, speed, throughput,Â- and reduces cost of ownership Carlsbad, CA, USA  - Nordson ASYMTEK, a leader in fluid dispensing, coating, and jetting technologies, will demonstrate its new, patent-pending, NexJet™ jetting system, with the one-piece Genius™ Jet Cartridge, at IPC APEX 2013 booth #3115. The Genius Jet Cartridge is the only system part that...

Read More »
Additives

Ashland to Introduce Natrosol Performax(TM) HEC to the European Coatings Market at the 2013 European Coatings Show

New technology adds even more choice to Ashland's world-leading portfolio of rheology modifiers, defoamers, surfactants and biocides SCHAFFHAUSEN, Switzerland – Paint manufacturers are constantly looking for innovative and cost-effective solutions to increase paint performance while meeting the ever-increasing governmental regulations to reduce volatile organic compounds (VOCs). Ashland offers...

Read More »
Additives

Ashland to Introduce Natrosol Performax(TM) HEC to the European Coatings Market at the 2013 European Coatings Show

New technology adds even more choice to Ashland's world-leading portfolio of rheology modifiers, defoamers, surfactants and biocides SCHAFFHAUSEN, Switzerland – Paint manufacturers are constantly looking for innovative and cost-effective solutions to increase paint performance while meeting the ever-increasing governmental regulations to reduce volatile organic compounds (VOCs). Ashland offers...

Read More »
Water-Dilutable Oligomer exhibits water resistance after cure.
Coatings

Water-Dilutable Oligomer exhibits water resistance after cure.

Dymax Oligomers & Coatings’ new water-dilutable oligomer, Bomar™ XR-9416, represents a breakthrough in technology.  This material exhibits substantial water resistance after cure, a property standard waterborne materials do not have.  This oligomer’s water resistance results in a water-barrier coating that has anti-fogging characteristics.  The 100%-solids, uncured material has a lower...

Read More »
Coatings

Conformal Coating eliminates need for additional processing.

Specially formulated to cure in shadowed areas underneath components on printed circuit boards, Dual-Cure 9482 is tack-free immediately after curing, helping to avoid defects such as fingerprints. Light- and moisture-cure coating is engineered for thicknesses up to 0.010 in. and demonstrates optimal re-workability. Fluorescing vivid blue when exposed to UV light, 9482 enables obvious detection of...

Read More »
Water-Dilutable Oligomer exhibits water resistance after cure.
Coatings

Water-Dilutable Oligomer exhibits water resistance after cure.

Dymax Oligomers & Coatings’ new water-dilutable oligomer, Bomar™ XR-9416, represents a breakthrough in technology.-  This material exhibits substantial water resistance after cure, a property standard waterborne materials do not have.  This oligomer’s water resistance results in a water-barrier coating that has anti-fogging characteristics.  The 100%-solids, uncured material has a...

Read More »
Coatings

Conformal Coating eliminates need for additional processing.

Specially formulated to cure in shadowed areas underneath components on printed circuit boards, Dual-Cure 9482 is tack-free immediately after curing, helping to avoid defects such as fingerprints. Light- and moisture-cure coating is engineered for thicknesses up to 0.010 in. and demonstrates optimal re-workability. Fluorescing vivid blue when exposed to UV light, 9482 enables obvious detection of...

Read More »
FCT Assembly Receives an NPI Award for Its New NanoSlic(TM) Multilayer Coating
Stencils

FCT Assembly Receives an NPI Award for Its New NanoSlic(TM) Multilayer Coating

GREELEY, CO — FCT Assembly announces that it has been awarded a 2013 NPI Award in the category of Coatings/Encapsulants for its NanoSlic™ Nano Coating. The award was presented to the company during a Tuesday, February 19, 2013 ceremony that took place at the San Diego Convention Center in California. FCT Assembly has developed the world's most advanced stencil technology for solder paste...

Read More »
FCT Assembly Receives an NPI Award for Its New NanoSlic(TM) Multilayer Coating
Stencils

FCT Assembly Receives an NPI Award for Its New NanoSlic(TM) Multilayer Coating

GREELEY, CO — FCT Assembly announces that it has been awarded a 2013 NPI Award in the category of Coatings/Encapsulants for its NanoSlic™ Nano Coating. The award was presented to the company during a Tuesday, February 19, 2013 ceremony that took place at the San Diego Convention Center in California. FCT Assembly has developed the world's most advanced stencil technology for solder paste...

Read More »
Stencil Coating minimizes spread of solder paste.
Coatings

Stencil Coating minimizes spread of solder paste.

Available on all types of stencils, including laser cut, electroformed, NicAlloy, and chemetch, Smart-Release™ Nano Layer Stencil Coating minimizes frequency required for under-screen cleaning on printer. Solder paste separates from stencil with minimal contamination on underside, leaving apertures and component edges cleaner for exact printing results. Over 40 prints can be reached before...

Read More »

All Topics