New MCS 7000 Concrete Moisture Control System is Applied with a Coverage Rate of 300-350 sq-ft/mixed unit
The MCS 7000 Concrete Moisture Control System includes two-component epoxy (component A (1-gal) and component B (0.79 gal) that are mixed together to form a coating. The product decreases the rate of harmful moisture vapor emissions up to 100% relative humidity and 25 lbs. down. The MCS 7000 when used with DriTac flooring adhesives for residential and commercial applications provides high perm...
Read More »
New Rust Bullet Protective Coating Offers Improved Adhesion to Concrete Surfaces
The Rust® Bullet DuraGrade Concrete Protective Coating is offered in 18 standard colors and can be applied using brush, roller, or spray equipment. The product is resistant to scratch, chip, chemical and UV. The DuraGrade’s formula is low in VOCs and is compliant to VOC standards in 50 states. The product exhibits 38 mg/ 1,000 Cycles (taber abrasion), mandrel bend of more than 32% and impact...
Read More »
New Pre-Taped High Temperature Masking Film Withstands Multiple Bake Cycles
IPG’s Pre-Taped High Temperature Masking Film is formulated from PG21 high temperature masking tape. The film is available with 0.35 mil thickness and is static free and corona treated to resist overspray flaking during multiple resin applications. PTHMF is suitable for marine, composites, and transportation industry.
Read More »
New VYNGUARD Polycarbonate Topcoat is Designed to Resist Film Deterioration
APV’s VYNGUARD® Polycarbonate Anti-Microbial Topcoat protects fabric or substrate from developing mildew, mold and bacteria. The product is suitable for high-end wall covering, mass transit seating, marine upholstery and decking applications. VYNGUARD coating features high-cross link density and UV inhibitors that resist UV degradation and shedding dirt. Coating is used on vinyl and PVC...
Read More »
The Ultimate Guide to Powder Coating
This white paper provides an overview guide to powder coating, a three stage process including pretreatment, application and curing.
Read More »
New WF725 Floor Finish Has Less Impact on Environment
WF725 Floor Finish is used for finishing gym floors and bonds with existing floor coating. Product is an odor-less water-based urethane that enables user to refinish gym floors without the requirement for expensive floor finishing services.
Read More »
New Dry-21 Mold Release is Offered in 16 fl-oz Cans
IMS’ Dry-21 Paintable PTFE Powder Mold Release is compliant to FDA standards for incidental food contact under 21 CFR 177.1550 and 184.100. The product is suitable for applications where molded parts are painted, plated or ink-stamped.
Read More »
AZEK Building Products Introduces Four New Colors to Its Porch Line with Wire-brushed Natural Matte Finish
The new AZEK porch colors mahogany, dark hickory, coastline and weathered teak add richness and design interest to its vintage collection. These colors are available for 12' and 16' length low maintenance porches. The porches with visually-inspiring colors are manufactured with a tongue-and-groove design. The porch's board profile is 3 1/8 inches wide and 1 inch tall. The Alloy Armour Technology...
Read More »Norheat Offers Ceramic Coatings for Crematoriums with Energy-saving Properties
Norheat’s proprietary, high-temperature ceramic coatings for crematoriums are ideal for all furnace conditions and heat resistant designs, such as pet crematory applications. The coatings help retain heat by absorbing energy from the process and protect the furnace surface, which results in lower maintenance costs and improved thermal efficiency. The benefits of Norheat's ceramic coatings...
Read More »
Qosmedix Introduces Ear Loop Masks Aid in Protecting Beauty Industry Professonals
Qosmedix extends its range of disposable apparel items with 3-Ply Ear Loop Mask in pink and blue colors. Gray 4-ply mask comes with breathable inner carbon filter. The units are designed for nail technicians and estheticians and protect from airborne germs and particles.
Read More »
Creative Materials Introduces the 127-50, A Hydro-Active Conductive/Resistive Ink and Coating for Humid Environments
Creative Materials' new hydro-active ink and coating called the 127-50 has a variable conductivity that is dependent on the humidity in the environment. The product has several applications, such as printing of electronic moisture-sensing elements, printed water-level monitoring, selective grounding and the monitoring of sweat in wearable devices. 127-50 can be used in screen printing, syringe...
Read More »
Complete Water Solutions Offers Wide Range of Water Treatment Equipment
Complete Water Solutions provides full installation tailored to your water treatment needs. Check out the video to learn more.
Read More »
