NANOMYTE® Protective Coatings are resistant to scratch and corrosion.
NEI’s NANOMYTE® Protective Coating Line includes MEND Self-Healing (MEND 1000-, 2000- and 3000-UVP), Top Coats (TC 4001- and 5001-UVP), Easy-to-clean (SR-500EC-UVP) and Anti-ice Coatings (SuperAi-UVP). SR-500EC-UVP and SuperAi-UVP coatings offer a static contact angle of 100 – 105°. This anti-ice coating provides ice adhesion value of less than 1 psi after more than 1,000 hrs of exposure....
Read More »
Creative Materials' Conductive Inks/Coatings are stretchable and breathable.
Creative Materials’ Conductive Inks/Coatings are offered in 127-48 (silver), 127-48E (silver/silver chloride) and 127-48LR (carbon) variants. These inks can withstand minimum of 50 machine wash and heated dryer cycles. These series coatings can be printed onto synthetic fabrics such as polyester, spandex and nylon. Coatings/Inks are suitable for electrodes, biosensors, heart rate monitoring,...
Read More »
Birchwood Technologies Gel Products are offered in 1 gal and 5 gal containers.
Birchwood Technologies Gel Products are available in Presto Black® Gel, Antique Brown® Gel, and Antique Black® Gel formulations. Presto Black® Gel is designed for use on non-stainless iron and steel surfaces whereas Antique Brown® and Black® Gel formulations are used on brass, bronze, and copper substrates. These gels takes 2 to 10 minutes for removing oil, oxides and welding flux and are...
Read More »
2K850 UV Cure Coating offers thickness of 200-400 μm.
2K850 UV Cure Coating is suitable for LED, automotive, aerospace and other tough electronic applications. Product is enhanced with edge coverage, adhesion, hardness and scratch resistance capabilities and offers protection against water, moisture and condensation. 2K850 coating meets UL94V-0, IPC-CC-830C, MIL-I-46058C and IEC 61086 standards and features an operating temperature range from -65 to...
Read More »
A Quick Guide to MASKING SOLUTIONS
This guide will provide an overview of the different masking options, and provide insight on which to use for your product.
Read More »
Electrolube's Silicone Coatings include 2K750, MCS and HCS.
Electrolubes’ 2K750 Conformal coating is compliant to UL94V-0 standards and offers operating range of -40 to +220°C and a cure time of 10 mins at 80°C. Moisture Cure Silicone conformal coating (MCS) and Heat Cure Silicone coating (HCS) are low stress coatings that offer -40 to +200°C operating temperature range. MCS provides touch-dry time of 10 mins at 25°C at ambient conditions whereas...
Read More »
Electrolube's UV Cure Coating Announced 'SMT Technology Product of the Year' in India
Electrolube, the leading manufacturer of specialist chemicals for the electronics, automotive, LED and industrial manufacturing industries, today announced that its innovative new 2K850 two-part, UV cure conformal coating has been selected as ‘SMT Technology Product of the Year’. This exciting new product was declared best in class for the Conformal Coatings category by the popular Indian...
Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...
Read More »
PG&O® Provides Advanced Optics and Thin-Film Optical Coatings for Biomedical Applications
Company will showcase optical components and thin film filters for medical and life science applications at SPIE’s BiOS booth #8648 and Photonics West 2018 booth #4867, Jan. 27- Feb. 1, 2018, Moscone Center, San Francisco. SANTA ANA, CA – December 19, 2017 - Precision Glass & Optics (PG&O - www.pgo.com), provides optical thin film coatings and custom optical solutions for a wide variety of...
Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...
Read More »
FloroPoxy MVT-24 Primer is tested under ASTM F1869 standards.
FloroPoxy MVT-24 Primer is applied at thickness of 23 mils. Offering protection against damage, the primer provides a moisture vapor transmission of up to 24000 lb/1000 sq-ft/24 hrs. The product can be directly applied to prepared concrete substrate with thin film application.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
