Coatings

Membrane imparts waterproofing, anti-fracture properties.

Intended for interior/exterior applications over any substrate, Hydro Barrier(TM) load-bearing, self-curing, liquid rubber polymer can be applied for flexible, seamless waterproofing and anti-fracture protection up to industry standard of 1/8 in. It has load-bearing Extra Heavy service rating per ASTM C627 and accelerates installations by not requiring fabric in field and being ready for flood...

Read More »
Fillers

Reinforcing Agent broadens applications for polypropylene.

Designed to meet needs of automotive and appliance industries, Hyperform HPR-803 replaces high loadings of heavy mineral fillers, such as talc, while delivering balance of stiffness and impact strength. Product also offers high heat deflection temperatures and comparable surface finish to talc-filled compounds that cannot be achieved with chopped glass fiber reinforcement.

Read More »
Spray Coating increases thermowell life.
Coating Services

Spray Coating increases thermowell life.

Able to be applied in thicknesses exceeding 2.54 mm and up to 5.08 mm, SDC-4 plasma flame sprayed coating increases life of thermowells in critical Fluid Catalytic Cracking Units (FCCU) in oil refineries and also reduces associated maintenance/repair. Solution is applied to tip of thermowells, providing corrosion resistance in harsh operating temperatures and pressures. Coating does not...

Read More »
Coating offers corrosion protection to 1,500°F.
Coatings

Coating offers corrosion protection to 1,500°F.

Formulated using waterborne silicate binder system filled with blend of stainless steel and ceramic corrosion inhibiting pigments, Corr-Paint(TM) CP3015-SS is suited for coating carbon steel and cast iron heat exchangers, boiler components, and exhaust headers. Single part coating system is supplied in ready-to-use viscosity of 500-1,000 cP, is applied using conventional spray equipment, and...

Read More »
Coatings

Roof Coating provides thermal insulation.

Designed for sloped roofs, Nansulate® Crystal clear protective coating provides thermal insulation, as well as resistance to UV, mold, and mildew. Coating can be applied over colored tile, barrel tile, clay tile, slate, wood shingle, and asphalt shingle roofs to provide energy savings by minimizing heat transfer through roof.

Read More »
Epoxy Coating checks mildew growth in damp, humid locations.
Paints

Epoxy Coating checks mildew growth in damp, humid locations.

Supplied as 2-package industrial coating, Tile-Clad® High Solids Mildew Resistant epoxy protects against mildew growth on exterior surfaces where dampness and humidity are of concern. It features gloss finish and is offered in variety of safety colors. Applications include clean rooms, laboratories, institutional kitchens, and chemical processing equipment where mildew growth must be...

Read More »
Epoxy Coating protects against mildew growth.
Paints

Epoxy Coating protects against mildew growth.

Suited for surfaces in damp, humid locations, Tile-Clad® High Solids Mildew Resistant Epoxy protects substrates such as steel, galvanizing, and concrete. Two-package coating features gloss finish and is available in variety of safety colors. Typical applications include clean rooms, laboratories, institutional kitchens, and chemical processing equipment, as well as water tank exteriors,...

Read More »
Dry Film Dielectric Photoresist is intended for 3D TSVs.
Photoresists

Dry Film Dielectric Photoresist is intended for 3D TSVs.

SINR series siloxane-based negative photoresist film, available in 12-100 micron thicknesses, will flow into vias to produce void-free dielectric fill and planarized surface. Suited for 3D Through-Silicon Vias (TSVs) and 2D wafer bonding applications, vacuum laminated dry films exhibit minimal residual stress with 90 MPa modulus that produces rubbery consistency and minimizes wafer bow....

Read More »
Anti-Seize

Jig-A-Loo's Graphite Extreme Now Available

- Extreme Lubricant Protects from Rust and Freezing, from -99 to 986 degrees F- STATESVILLE, N.C., July 23 / / - Jig-A-Loo USA, Inc. (www.jigaloo.com), makers of innovative automotive and home improvement products, announced today that its award-winning extreme temperature lubricant, Graphite Extreme can now be found at Advance Auto Parts and The Home Depot stores nationwide. This quick-dry, high...

Read More »
Waterborne Flash-Off System offers portable design.
Sprayers

Waterborne Flash-Off System offers portable design.

Portable COL-MET EVO-1 tower stand is suited for waterborne-based primer and basecoat applications in prep station setting. It includes 3 Venturu nozzles that create turbulence to disrupt laminar airflow during flash-off and 3 SS pipes with rotating air outlets that position nozzles for optimal airflow settings. Air speed is adjustable with multidirectional velocity cones, while manual timer lets...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers