Mold Release Agent is formulated for brake pad manufacturing.
Release Agents

Mold Release Agent is formulated for brake pad manufacturing.

Release Coating 7776, formulated for molding friction materials, is water-based agent that protects mold from penetration by abrasive friction materials used in molding process. It can be diluted at ratio of 1 part concentrate to 15 parts water. Withstanding 350°F and higher mold temperatures, it provides smooth, defect-free parts when applied using automated spray systems. Product is...

Read More »
Mold Release Agent prevents in-mold gloss build-up.
Release Agents

Mold Release Agent prevents in-mold gloss build-up.

Release Coating 7772 is water-based release agent that prevents mold build-up from triggering increase of gloss in within-mold painted polyurethane systems. Agent provides smooth, defect-free parts and allows gloss quality to be maintained with less frequent cleaning. Painted parts have consistent, defect-free appearance with dry, nontacky feel, and are resistant to scuff and mar. Typical...

Read More »
Coatings

Somay/Underwater Technologies "Hycote" 151 Epoxy Coating

The theme park in Dubai, UAE, wanted to avoid shutting down their popular water slide, but the concrete surface had become rough and needed to be refinished. SOMAY/UNDERWATER TECHNOLOGIES® "HYCOTE" 151 Epoxy Coating came to the rescue. It can be applied to wet concrete and cures underwater so the slide was ready for kids to slide down when the park re-opened the next morning. The park was so...

Read More »
Coatings

Sherwin-Williams Offers Euronavy ES301 Surface Tolerant Anticorrosive

AN EXTREMELY COST EFFECTIVE WAY TO PROTECT STEEL ASSETS FROM CORROSION Cleveland, OH - Sherwin-Williams offers Euronavy ES301, an innovative solvent-free anticorrosive epoxy designed for application over marginally prepared surfaces. Sherwin-Williams acquired Euronavy in December 2008. Euronavy ES301 is an extremely durable surface-tolerant coating that allows customers to protect their steel...

Read More »
Coatings

Low-VOC Moisture-Cure Urethane Coating is chemical resistant.

With low temperature cure at 20Â-ºF and application in conditions up to 85% relative humidity, Cor-Cote HB Urethane provides 4 hr return to service and can be applied on concrete, as well as steel substrates. Reinforced with micaceous iron oxide, it delivers high abrasion resistance, film integrity, and edge retention qualities. Product is suited for municipal and industrial wastewater...

Read More »
Refractory Coating handles high temperatures up to 3,200°F.
Coatings

Refractory Coating handles high temperatures up to 3,200°F.

Single part, water-dispersible, phosphate-bonded, and alumina-filled system, Pyro-Paint(TM) 634-ALP ceramic-based sealant is used to fill micro-porosity in dense refractory brick used in high temperature kilns and furnaces. Coating is inert, chemically resistant, inorganic, and does not outgas or decompose in corrosive applications to 3,200Â-ºF. Available in pint, quart, gallon, and 5 gal...

Read More »
Coatings

Acrylic Conformal Coating has eco-friendly formulation.

Based on acrylic technology and bio-derived, ecologically-friendly solvent system, CONAP® CE-2290 does not require use of petroleum-based or reportable solvents and is free from hazardous air pollutants. Solvent portion is non-carcinogenic, biodegradable, and free of ozone-depleting solvents. RoHS-compliant and repairable, coating exhibits tack-free air drying time of 5 min @ 25°C and...

Read More »
Resins

EBECRYL® 8296 New UV Curable Resins Enabling Pleasant Tactile Sensations

Low-emission and energy efficiency for haptic coatings Brussels - Cytec Industries Inc. (NYSE:CYT) is pleased to announce the launch of EBECRYL® 8296, a new UV curable resin that provides formulators with options to develop haptic finishes. The use of haptic coatings has seen increased adoption in multiple coating applications such as consumer goods, electronics and films. Cytec is leading...

Read More »
Plugs and Stoppers

Hot Finishing Masks Include Rubber Materials

EPDM and Silicone Rubber Masking Plugs and Caps are a hot item at StockCap When a finishing process heats up, StockCap can respond to all the masking needs to protect ports, threads and more. EPDM and silicone rubber masking options are used in powder coating and e-coating finishing processes, while EPDM is a great chemical resistant material for plating operations. Both EPDM and silicone rubber...

Read More »
Adhesive Tapes

StockCap Offers Masking Solutions for Irregular Shapes

StockCap tapes, discs and films can protect irregular shaped parts that require masking during a finishing process Masking tapes, discs and films are ideal for painting, powder coating and e-coating applications especially when an object is of large or irregular shape. Applied and removed easily, masking tapes, discs, and films are flexible and conform to the shape providing a precise line...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers