Polyurea Spray Liner System eliminates corrosion.
Container Liners

Polyurea Spray Liner System eliminates corrosion.

Designed to prolong life of equipment used in bulk material handling operations, such as aggregate handling, mining, and concrete handling, Rhino Hyde Spray 8500AR is spray-applied to virtually any thickness and creates seamless membrane that eliminates corrosion. Product is applied with 2-component high-pressure impingement mixing spray machine and is suitable for screen deck grids, slurry...

Read More »
Extrusion Primer suits food packaging applications.
Chemical Primers

Extrusion Primer suits food packaging applications.

Designed for converters of flexible packaging substrates, water-based Michem® Flex P1883 adheres to aluminum foil and paper, bonds to extrusion coated resins, and protects foil from corrosion. Product can also help prevent packages from delaminating when in contact with aggressive contents. Featuring 25% solids content and freeze/thaw stability, primer meets regulations for food packaging,...

Read More »
Mechanical Seals

Diamond-Coated Mechanical Seals extend pump life.

Applied in 8 Â-µm thickness on silicon carbide seal face to combat dry-running problems, DiamondFaces® microcrystalline coating exhibits virtually no wearing and results in reduced sliding-face friction. Combining SiC seal faces with DiamondFaces® coating allows dry-running periods up to several hours without any excessive heat build-up. Synthetically manufactured, ultrapure...

Read More »
Cast Latex Digital Printing Film also acts as gloss laminate.
Miscellaneous Film

Cast Latex Digital Printing Film also acts as gloss laminate.

Intended for dry vehicle wrapping applications, HXL300WG2 is PVC-free and does not contain any solvents, plasticizers, or heavy metals. Compound is flexible and conformable enough to suit car wraps as well as general applications that demand conformable film. Made of aqueous emulsion of plastic material, film has thickness of 3.9 mil and is rated for printed and laminated vertical outdoor...

Read More »
Brush-On Metal Finishing Gel produces silver/black gunmetal finish.
Miscellaneous Compounds

Brush-On Metal Finishing Gel produces silver/black gunmetal finish.

Suitable for most metal surfaces, including iron, steel, copper, brass, and bronze, Presto Black® Gel clings to vertical surfaces and stays where applied without forming runs or drips or bleeding onto adjoining surfaces. Product is applied at room temperature and takes 5-10 min for reaction following normal surface cleaning. Color tone and depth is controlled by visual inspection and stopping...

Read More »
Polysiloxane Finish Coat extends maintenance cycles.
Coatings

Polysiloxane Finish Coat extends maintenance cycles.

Promoting long-term color and gloss retention in harsh environments, Polysiloxane 1K cures with reaction from atmospheric humidity and provides weathering and chemical resistance. Single-component solution, available in Extra White base that can be tinted, provides protection in recommended range of 1.5-2.5 mils DFT. Application can take place in temperatures as low as 40°F and up to 90%...

Read More »
Coatings

Protective Floor Coatings offer UV and abrasion resistance.

Able to cure in all weather and temperature applications, ASPART-X(TM) Coatings provide UV protection that does not yellow or fade. This zero VOC, 100% solid, aliphatic, pure polyurea coating is resistant to impact, abrasion, and chemical damage and can be configured in various non-skid finishes. Engineered as topcoat for polyurea and polyurethane systems, proiduct can also be used as stand-alone...

Read More »
Chrome Masterbatch creates mirror-like effect for plastics.
Colors

Chrome Masterbatch creates mirror-like effect for plastics.

Intended for use with molded plastic components, UltraChrome requires single-step molding process that eliminates VOC and carbon emissions that occur in secondary painting operations. Reflective properties will not chip or scratch off, and molding throughout part ensures piece-to-piece uniformity. Used with polyolefins and various engineered resins, product is dispersed throughout part so that...

Read More »
Coatings

Fluoropolymer Coatings have ultra-low VOCs.

With less than 100 g VOC/L, Series 1070V Fluoronar features gloss finish while Series 1071V Fluoronar consists of semi-gloss formulation. High-solids products resist damaging effects of UV light and achieve consistent film thickness, so they can be applied by brush, roll, or spray. Available in more than 500 colors, coatings are suitable for high-profile architectural projects.

Read More »
Miscellaneous Compounds

Walco Materials Group Now Offers Innovative Chem-Trend Thermoplastics Premier Mold Release Agents, Cleaners, and Lubricants in the USA

Customers in the USA can now benefit from innovative Chem-Trend Thermoplastics and Rotational Molding product range offered by Walco Materials Group. Walco is among the few authorized distributors of Chem-Trend Thermoplastics and currently the only authorized distributor for Rotational Mold Release. San Diego, CA -- Walco Materials Group, a leading supplier of materials for Electronic, Mold...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers