Uniboard® Previews 18 New Designs and 3 Textures for 2019-2020 at the International Woodworking Fair (IWF)
LAVAL, QC, Aug. 23, 2018 /PRNewswire/ - Uniboard, the North American leader in engineered wood products and the creator of the synchronized (EIR) texture technology in North America, is proud to announce the preview of eighteen new designs and three new textures at the International Woodworking Fair (IWF) August 22 – 25 in Atlanta. Uniboard is launching three new exclusive finishes...
Read More »
Axalta to Showcase Latest Wood Coatings Technology at International Woodworking Fair in Atlanta
PHILADELPHIA, Aug. 21, 2018 /PRNewswire/ -- Axalta (NYSE: AXTA), a leading global supplier of liquid and powder coatings, will exhibit its wood coatings products and services at the International Woodworking Fair (IWF) in Atlanta, GA August 22-25, 2018. The four-time NASCAR Cup Series Champion Jeff Gordon will make a special appearance at Axalta's booth (#1562) in Building C of the...
Read More »
Latest Eleglas Decorative Coatings Come with Anti-Shatter Technology
The Eleglas™ Glass and Ceramic Coatings are available in various colors, finishes and specifications. These coatings are suitable for use in cosmetics, beverage containers, lighting and glassware industries. The products protect surfaces against shattering, chemicals, abrasions, scratches and washing. Eleglas coatings' anti-shatter technology protects broken items from leaking or causing...
Read More »
New MCS 7000 Concrete Moisture Control System is Applied with a Coverage Rate of 300-350 sq-ft/mixed unit
The MCS 7000 Concrete Moisture Control System includes two-component epoxy (component A (1-gal) and component B (0.79 gal) that are mixed together to form a coating. The product decreases the rate of harmful moisture vapor emissions up to 100% relative humidity and 25 lbs. down. The MCS 7000 when used with DriTac flooring adhesives for residential and commercial applications provides high perm...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »
New Rust Bullet Protective Coating Offers Improved Adhesion to Concrete Surfaces
The Rust® Bullet DuraGrade Concrete Protective Coating is offered in 18 standard colors and can be applied using brush, roller, or spray equipment. The product is resistant to scratch, chip, chemical and UV. The DuraGrade’s formula is low in VOCs and is compliant to VOC standards in 50 states. The product exhibits 38 mg/ 1,000 Cycles (taber abrasion), mandrel bend of more than 32% and impact...
Read More »
New Pre-Taped High Temperature Masking Film Withstands Multiple Bake Cycles
IPG’s Pre-Taped High Temperature Masking Film is formulated from PG21 high temperature masking tape. The film is available with 0.35 mil thickness and is static free and corona treated to resist overspray flaking during multiple resin applications. PTHMF is suitable for marine, composites, and transportation industry.
Read More »
New VYNGUARD Polycarbonate Topcoat is Designed to Resist Film Deterioration
APV’s VYNGUARD® Polycarbonate Anti-Microbial Topcoat protects fabric or substrate from developing mildew, mold and bacteria. The product is suitable for high-end wall covering, mass transit seating, marine upholstery and decking applications. VYNGUARD coating features high-cross link density and UV inhibitors that resist UV degradation and shedding dirt. Coating is used on vinyl and PVC...
Read More »
New WF725 Floor Finish Has Less Impact on Environment
WF725 Floor Finish is used for finishing gym floors and bonds with existing floor coating. Product is an odor-less water-based urethane that enables user to refinish gym floors without the requirement for expensive floor finishing services.
Read More »
New Dry-21 Mold Release is Offered in 16 fl-oz Cans
IMS’ Dry-21 Paintable PTFE Powder Mold Release is compliant to FDA standards for incidental food contact under 21 CFR 177.1550 and 184.100. The product is suitable for applications where molded parts are painted, plated or ink-stamped.
Read More »
AZEK Building Products Introduces Four New Colors to Its Porch Line with Wire-brushed Natural Matte Finish
The new AZEK porch colors mahogany, dark hickory, coastline and weathered teak add richness and design interest to its vintage collection. These colors are available for 12' and 16' length low maintenance porches. The porches with visually-inspiring colors are manufactured with a tongue-and-groove design. The porch's board profile is 3 1/8 inches wide and 1 inch tall. The Alloy Armour...
Read More »
SRG Global Coatings Enhance Surface Durability, Efficiency, Design Flexibility
SRG Global's automotive coatings enhance the structural integrity of the finished part while also improving vehicle efficiency. Check out our video to learn more.
Read More »
