Miscellaneous Liners

Self-Priming Coating protects petrochemical tanks and piping.

Suited for tank linings and piping under insulation, Cor-Cote® HT FF contains micaceous iron oxide for anti-corrosion and edge protective properties. Epoxy novolac amine is resistant up to 450°F in dry service environment and will perform in areas subject to wet/dry cycling up to 300°F. Available in 3 shades of gray, product can be applied to steel, stainless steel, or concrete...

Read More »
Adhesive Tapes

Protective Film conforms to textured and coarse surfaces.

Used during processing, assembly, and shipping, Surface Guard® 73 provides temporary protection of complex - textured, rugged, coarse - surfaces. Combination of polyethylene film coated with blend of aqueous adhesives results in masking that is soft and aggressive, while chemistry provides high tack and medium-high peel. Properties also ensure clean removal when protection is no longer...

Read More »
Thermally Conductive Epoxy also offers electrical insulation.
Epoxies

Thermally Conductive Epoxy also offers electrical insulation.

With thermal conductivity over 22 BTU/in/ftÂ-²/hr/°F and serviceability from -60 to +400°F, EP21ANHT helps mitigate issues associated with tightly packed components and miniaturized electronic circuits. This 2-component adhesive, sealant, and coating has 1:1 mix ratio by weight or volume and cures at room or elevated temperatures. Also able to act as electrical insulator, cured...

Read More »
Pigments

FDA-Approved Pigments suit freezer and microwave applications.

Available in 4 transparent colors, such as Sapphire Blue and Ruby Red, Gem-Tone(TM) Polymeric Colorants are FDA-approved for use in clarified Polypropylene. Pigments meet standards for direct food contact and are approved for heat pasteurization and microwave conditions. They may be used in houseware products that go straight from freezer to microwave, including plates, containers, cups, and...

Read More »
Miscellaneous Film

Protective Film safeguards high gloss and lightly textured surfaces.

Surface Guard® 123 series provides temporary protection for variety of surfaces, including smooth and lightly textured types, during processing, assembly, and shipping. Polyolefin film is coated with blend of aqueous adhesives, and its properties enable hybrid masking capable of handling water/condensation, heat, and high surface energy. Typically supplied on 1.5-3 mil PE films, with clear...

Read More »
Coatings

Aluminized Polyurea Roof Coating optimizes energy efficiency.

Rhino(TM) Eco-Coat(TM) helps to reflect sunlight off roof and to improve energy efficiency of building. Aromatic, zero VOC, spray-applied coating for commercial and industrial roofs contains UV stabilizers and leafing aluminum pigment for UV stability. High tensile strength and abrasion resistance enables 2-component product to resist hail, mechanical impact, and pest infestations. It can be used...

Read More »
Paints

NeverFade Used on The NextGen Flex Home 2011

AKRON, OHIO - When builders and contractors join together for the 2011 International Builders' Show, they'll easily spot The NextGen Flex Home(TM) on site at the Orlando Convention Center. Painted with "Blue Bayou" NeverFade(TM) exterior paint, and trimmed out in "Coconut" NeverFade paint, the showcase home will easily draw the attention of thousands of on-site visitors. The professional exterior...

Read More »
Coatings

Industrial Nanotech, Inc. Announces Successful Use of Nansulate® to Prevent Computer Shutdowns in Mexican Government Building

NAPLES, Fla. - Industrial Nanotech, Inc. (Pink Sheets:INTK), an emerging global leader in nanotechnology based energy saving solutions, today announced that the Company's patented Nansulate® energy saving protective coating was successfully used to solve the problem of computer shutdowns due to high temperatures in a building of the IMSS (Instituto Mexicano del Seguro Social - Social Security...

Read More »
Masonry and Stucco Primer has alkali-resistant formulation.
Coatings

Masonry and Stucco Primer has alkali-resistant formulation.

Fast drying KILZ® Masonry and Stucco primer can be used on recently poured masonry and stucco surfaces. It penetrates and binds light surface chalk, creating surface that is ready to be top coated, and is suited for use with interior and exterior above-grade masonry, stucco, plasters, and poured and precast concrete. Available in 5 gal containers, clear primer is 100% styrene acrylic, is...

Read More »
Polaris Snowmobiles Run-Off with Environmentally-Friendly Gardobond® EPP Technology from Chemetall
Coatings

Polaris Snowmobiles Run-Off with Environmentally-Friendly Gardobond® EPP Technology from Chemetall

Environmentally-friendly metal pretreatment technology replaces former iron phosphating process Polaris snowmobiles run-off with environmentally-friendly Gardobond® EPP technology from Chemetall Polaris Industries is credited as one of the first makers of production snowmobiles. As the leading manufacturer for recreational and outdoor products, Polaris has changed their snowmobile pretreatment...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers