Ovens

Ovens

Clean Process Oven for semiconductor industry.

LCC2-14 has chamber volume of 14 cu ft, large enough to handle thermal processing of 200 and 300 mm semiconductor wafers. It has stainless steel interior with continuously welded seams to protect work chamber from contamination. Oven is SEMI S2 and CE compliant, can be configured for multiple voltages and 50/60 Hz, and has UL and C-UL listed open control panel with lockable disconnect switch....

Read More »
Photoresist Oven allows automated handling of 300 mm wafers.
Heaters

Photoresist Oven allows automated handling of 300 mm wafers.

Company's 300mm Automated Photoresist Bake Oven offers 2 Front-Opening Unified Pod (FOUP) loadport stations with atmospheric Class 1 clean room-compatible robots and optically based Class 1 laser cassette mapping sensors. Its 2 heat treatment chambers hold 25 wafers each during photoresist bake cycle. Temperature uniformity is +/-1.5 deg C at 95 deg C operating temperature (150 deg C max). It...

Read More »
Walk-In Oven provides 500 deg gas heat.
Ovens

Walk-In Oven provides 500 deg gas heat.

No. 884 offers workspace dimensions of 52 in. wide, 48 in. deep, and 72 in. high. It is heated by modulating natural gas burner, which provides 350,000 Btu/hr, while 4200 cfm, 3 hp recirculating blower provides horizontal airflow across workload. Oven has stainless steel exterior with #4 brushed finish, Type 430 stainless steel interior, 4 in. thick insulated walls, and 2 in. thick insulated...

Read More »
Ovens

Reflow Oven has flux management system and touch-screen.

SMT 1.7TC solders most paste at set temperature up to 40 deg C while consuming only 3 kW per hour. Slot nozzles are installed perpendicular to conveyor at top and bottom of oven's peak zone and act like curtain of hot air that boards must pass through. After heat is transferred to board, air is sucked back into channels beside nozzles for reheating. Short travel distance allows for fan capacity...

Read More »
Chromatography Media

HPLC Detector and Column Oven can be operated remotely.

Series 200 Liquid Chromatography (LC) product line includes Diode Array-based Liquid Chromatography (HPLC) Detector and Peltier Column Oven with integrated column selection valve. Diode Array Detector allows secure transmission of chromatographic and spectral information over networking systems. HPLC Column Oven provides precise temperature control. Both may be controlled from local PCs or...

Read More »
Batch Ovens are built to size with various configurations.
Ovens

Batch Ovens are built to size with various configurations.

Ovens are available with top or rear-mounted heat chambers, plate or insulated floors, cart tracks, overhead conveyer headers, full horizontal air, shelf, and hanging or flat-bed carts. Sizes range from 144 to 2,800 cu ft capacities, in gas and electric configurations from 450 to 850 deg F, with digital controls, adjustable air ducts, and fan-forced air.

Read More »
Sterilization Oven minimizes floor space requirements.
Ovens

Sterilization Oven minimizes floor space requirements.

SD Sterilization and Depyrogenation Oven is 50 in. wide and 96 in. high, with chamber capacity of 30 cu ft. It is available in 3 configurations: ultra performance, with cycle time of 1 1/2 hr; high performance, with 2 1/2 hr cycle time; and standard performance, with cycle time of 6 hr. Recirculation filter system prevents mechanical stress on HEPA filter. Control system minimizes filter supply...

Read More »
Conveyorized Oven has NEMA-12 enclosure.
Ovens

Conveyorized Oven has NEMA-12 enclosure.

CE-compliant Small Conveyorized Curing/Drying Oven features HEPA-filtered, recirculated airflow for operation at Class 100 conditions and better. Corrosion-resistant, stainless-steel conveyor and Teflon®-coated guide rails minimize particulate generation. Oven features variable-speed conveyor and is available with operating temperatures up to 500°F. It handles small, dense loads with...

Read More »
Cleanroom Cabinet Oven operates at 500 ºF.
Ovens

Cleanroom Cabinet Oven operates at 500 ºF.

No. 880 Class 100 cleanroom cabinet oven can be used to cure urethane, silicone and steel parts. It measures 36 x 36 x 51 in. and has Incoloy sheathed tubular elements that heat workspace, while 1500 cfm, 2 hp recirculating blower provides horizontal airflow across workload. Oven has 16 ga. Type 304 2B finish stainless steel interior with continuously backwelded seam construction. Exterior is...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers