Ovens

Gas-Fired IR Conveyor Oven features 16 zones of control.
Ovens

Gas-Fired IR Conveyor Oven features 16 zones of control.

Suited for automotive industry to cure water-based coatings on cow hides, model 808CM09516 cures 18 g of wet paint in 1 min and removes moisture associated with cure process via variable-frequency-driven exhaust system. Oven utilizes SunCat(TM) heater that uses catalyst technology and operates at temperatures from 800-1,700°F. Combustion blower feeds oxygen to face of heater, heating parts...

Read More »
Electric IR Oven dries steel webs that run 200 fpm.
Ovens

Electric IR Oven dries steel webs that run 200 fpm.

Featuring 3 zones that provide uniform heat across web, model Web Dryer/IR/E removes moisture on steel web from 1/8-Â-½ in. thick. Oven uses medium-wave, rapid response heaters and lets users turn off zones when drying smaller web widths. With heaters mounted to heat from top-down and bottom-up, unit can operate coil temperatures up to 2,000°F. Casters enable unit to be moved off web...

Read More »
Electric Infrared Oven removes moisture on steel web.
Ovens

Electric Infrared Oven removes moisture on steel web.

With heating capacity of 200 kW, WebDryer/IR/E dries moisture on steel web ranging from 1/8-Â-½ in. thick and running up to 200 fpm. Three zones provide uniform heat across web and can be turned off when drying smaller web widths. Featuring tongue and groove panel construction with 6 in. of insulation, oven uses medium-wave, rapid response heaters and can operate coil temperatures up to...

Read More »
Pit Furnace is rated for temperatures to 2,000°F.
Ovens

Pit Furnace is rated for temperatures to 2,000°F.

With workspace dimensions of 24 x 24 x 24 in., electrically-heated, top-loading No. 943 features 26 kW installed in nickel chrome wire coils, which are supported by vacuum-formed ceramic fiber. Insulated walls integrate 5 in. of 2,300°F ceramic fiber blanket and 2 in. of block insulation. Unit includes 6Â-½ in. thick furnace floor made of castable refractory materials; air-operated,...

Read More »
Electric Inert Atmosphere Oven is rated to 1,250°F.
Ovens

Electric Inert Atmosphere Oven is rated to 1,250°F.

With workspace dimensions of 36 x 120 x 36 in., No. 938 has aluminized steel exterior; Type 304, 2B finish stainless steel interior; and 10 in. insulated walls. Electrically-heated oven has 80 kW installed in Incoloy-sheathed tubular heating elements and 6,000 cfm, 5 hp recirculating blower that provides universal front to rear airflow to load. Also included, 975 cfm blower pulls air through air...

Read More »
Walk-In Oven suits heat treating and paint baking.
Heat Treatment Equipment

Walk-In Oven suits heat treating and paint baking.

No. 839 electrically heated, 850°F walk-in oven offers workspace dimensions of 72 x 120 x 72 in. Featuring 12,500 cfm, 10 hp recirculating blower, oven provides combination horizontal/vertical airflow to workload. It has aluminized steel exterior and interior with 7 in. thick insulated walls plus 4 in. thick insulated floor with built-in truck wheel guide tracks. Inner door gasket seals...

Read More »
Twin-Lane Belt Conveyor Ovens preheat aluminum ingots.
Ovens

Twin-Lane Belt Conveyor Ovens preheat aluminum ingots.

Featuring 1,000°F max continuous operating temperature, 9 ovens feature 18 x 5 x 2 ft work chamber with 2 conveyor belts. Each conveyor lane includes 24 in. wide, 304 stainless steel, 1 x 1 in. flat wire belt and is driven by separate variable-speed dc drive. Heated with direct-fired burner rated for 1,800,000 BTU/hr, ovens have NEMA 12 control panel and plug-mounted blower rated for 30,600...

Read More »
Gas Catalytic IR Oven cures powder on electrical components.
Ovens

Gas Catalytic IR Oven cures powder on electrical components.

Rated for 200-600°F, indexing batch oven employs 12 SunCat(TM) Gas Catalytic Medium-Wave burners, each rated at 88,000 BTUH. Able to operate at temperatures to 1,700°F, IR heaters have combustion blower that feeds oxygen to face of heater and acts as source for convective air. Oven features 14 ft x 6 ft x 10 ft 6 in. work chamber, 4 in. thick tongue and groove panel construction,...

Read More »
Oven dewrinkles leather, cloth, and vinyl seats.
Assembly Machinery

Oven dewrinkles leather, cloth, and vinyl seats.

Model ISC-102-4Z Medium Wave Infrared Seat Dewrinkling Oven has multiple zones that provide optimum heat to different areas of automotive seats. Heating panels are fabricated of type 430 stainless steel and can be moved in multiple directions. It utilizes medium-wave quartz goldenrod tube technology and features snap-in ceramic blocks. Control package uses PLC to store multiple recipes, reducing...

Read More »
Walk-In Batch Oven cures powder on aircraft components.
Ovens

Walk-In Batch Oven cures powder on aircraft components.

With 27 x 9 x 9 ft clear work chamber, natural gas fired Model SWH-9279-G has max continuous temperature rating of 500°F and delivers heated air through adjustable duct for uniform distribution. Burner, rated for 1.5 MBTUH, and recirculation blower, rated for 18,500 cfm @ 20 hp, are located in roof-mounted heater house. Oven body is fabricated with 4 in. thick tongue and groove panel...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers