Ovens

Rehm Thermal Systems Drive Energy Efficiency to Unlock Cost-of-Ownership Advantage
Soldering Machinery

Rehm Thermal Systems Drive Energy Efficiency to Unlock Cost-of-Ownership Advantage

Rehm Thermal Systems has reduced the cost-of-ownership of the formation of reliable solder joints for customers around the world. Driven by a commitment to energy efficiency that characterises products such as the VisionXP reflow system, Rehm's cost-of-ownership advantage is the direct result of low energy consumption values. The VisionXP Convection Soldering System incorporates a series of...

Read More »
Soldering Machinery

Rehm Thermal Systems Will Highlight Advanced Soldering & Solar Solutions at Productronica, Booth A4.341

As the world's leading exhibition for electronics manufacturing, Productronica 2009 delivers an ideal platform for Rehm Thermal Systems to showcase its range of Convection and Condensation as well as Vacuum Condensation Systems, along with a live demonstration of its popular Pyrolysis residue management technology. The Rehm team will also reveal solar equipment or the metallization line at the...

Read More »
Ovens

Electric Top-Loading Oven cures composite components.

With 26½ x 2 x 2½ ft workspace, 500°F Model No. 1007 utilizes 60 kW Nichrome wire heating elements and three 3 hp recirculating blowers totaling 9,000 cfm to provide horizontal rear-to-front airflow to workload. Oven has 4 in. insulated walls, aluminized steel interior and exterior, motor-operated rear-hinged door, and compressed air manifold with 8 connections. Designed to NEMA 12...

Read More »
Conveyorized Tunnel Oven is electrically heated to 350°F.
Ovens

Conveyorized Tunnel Oven is electrically heated to 350°F.

Along with 66 in. x 19 ft x 15 in. workspace dimensions, No. 1006 oven has 120 kW installed in Incoloy sheathed tubular heating elements and uses 17,500 cfm, 15 hp recirculating blower to provide vertical downward airflow. Elements of construction include 4 in. insulated walls, aluminized steel interior/exterior, and gravity roller conveyor with 1.9 in. dia rollers on 6 in. centers. Other...

Read More »
Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at EUPVSEC 2009, Booth B5/45
Air / Hot Air Dryers

Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at EUPVSEC 2009, Booth B5/45

The team at Rehm Thermal Systems are preparing to showcase the company's best-in-class capabilities for solar cell metallization at the 24th European Photovoltaic Solar Energy Conference & Exhibition. Being held from September 21st - 25th in Hamburg, Germany, EUPVSEC 2009 will introduce visitors to the thermal specialist's recently updated line of fast-firing systems and drying ovens. On display...

Read More »
Two-Zone, Top-Loading Oven reaches temperatures to 500°F.
Ovens

Two-Zone, Top-Loading Oven reaches temperatures to 500°F.

Employing 24 kW (12 kW per load) in Incoloy-sheathed tubular heating elements, electrically heated No. 1012 features two 96 x 12 x 12 in. zones that can be separated for use as independent ovens. Dual 1/3 hp recirculating blowers provide total horizontal airflow of 1,200 cfm to workload, and reinforced flooring accommodates loads to 500 lb. Constructed with 4 in. insulated walls and aluminized...

Read More »
650°F Walk-In Oven
Ovens

650°F Walk-In Oven

No. 1009 is an electrically-heated, 650ºF (~343ºC) walk-in oven from Grieve, currently used for heat treating large steel spools. Workspace of this unit measures 10' W x 7' D x 8' H. 180 KW are installed in Incoloy-sheathed tubular heating elements, while a 24,500 CFM, 20-HP recirculating blower provides combination airflow to the workload. This walk-in oven features 5" insulated...

Read More »
Walk-In Oven targets heat treating applications.
Ovens

Walk-In Oven targets heat treating applications.

Providing 10 x 7 x 8 ft workspace, 650°F No. 1009 utilizes 180 KW Incoloy-sheathed tubular heating elements and 24,500 cfm, 20 hp recirculating blower to provide combination airflow to workload. Electrically heated oven has 5 in. insulated walls, aluminized steel interior/exterior, removable top-mounted heat chamber, 5,000 cfm powered exhauster, and motorized dampers on intake and exhaust....

Read More »
350ºF Electric Cabinet Oven
Ovens

350ºF Electric Cabinet Oven

No. 1013 is an electrically-heated, 350ºF (~177ºC) cabinet oven from Grieve, currently used for curing rubber parts at the customer's facility. Eight workspace openings with roller supported shelves each measure 36" W x 6-1/4" H x 24" D. 45 KW are installed in Incoloy-sheathed tubular heating elements, while a 7800 CFM, 5-HP recirculating blower provides horizontal airflow to the common...

Read More »
Cutting-Edge Infrared Preheating Process Lets Queen City Forging Refine Its Business
Heat Treatment Equipment

Cutting-Edge Infrared Preheating Process Lets Queen City Forging Refine Its Business

Family-owned Queen City Forging might be a relatively small company, but its president Rob Mayer hasn't let that stop its pursuit of technological innovation. Working with the U.S. Department of Energy's Tennessee-based Oak Ridge National Laboratory and others, the East End manufacturer has developed a method of rapidly preheating aluminum for forging, using an infrared oven in place of a...

Read More »

All Topics