Ovens

Cleanroom Conveyor Oven cures low-friction coating onto vials.
Cleanroom Equipment

Cleanroom Conveyor Oven cures low-friction coating onto vials.

Electrically heated Gruenberg NFPA 86 Class A Conveyor Oven curesÂ- thin coating onto glass vials, used in pharmaceutical industry, to produce low-friction surface. This 4-module, 400°C oven, which contains 3 heating chambers and one chamber for cooling, processes 120 vials/min as they advance in trays along >30 ft conveyor belt. Installed in each chamber, 1,750 cfm,...

Read More »
Ovens

Blue M Announces New, Two-Year Warranty on Most Products Shipped within the U.S.

Blue M, an industry leader in the design, engineering, manufacturing and after-market support of industrial lab ovens, and light-industrial furnaces, today announced it has extended its warranty from one year to two year on most parts and labor for the majority of its products shipped within the US. The enhanced warranty does not apply to fan motors and does not cover Blue M's CEO Series...

Read More »
High-Performance Oven for Leading Provider of Paint and Coatings
Ovens

High-Performance Oven for Leading Provider of Paint and Coatings

SANDUSKY, OH – LEWCO, Inc. recently shipped a High-Performance Tote Oven to a leading global technology provider of paint and other coatings. The oven, model HSC08TV, is steam heated and rated for service up to 300°F. The oven is specifically designed to heat (8) 250 gallon totes. Due to installation in an electrically hazardous location, the entire electrical system is rated NEMA 7 9,...

Read More »
Aluminum Melting and Holding Furnace has 13,700 lb max capacity.
Ovens

Aluminum Melting and Holding Furnace has 13,700 lb max capacity.

Along with steel plate construction andÂ- steel member-reinforced shell, aluminum melting and holding furnace (gas fired) features roof-mounted, nozzle-mix radiant burner; pneumatic flue damper; drain tap; and UL-listed control panel. Holding capacity is 13,700 lb, and melting rate is 1,500 lb/hr. While preheat hearth with full width door is used for loading...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Walk-In Preheating Oven reaches temperatures up to 900°F.
Ovens

Walk-In Preheating Oven reaches temperatures up to 900°F.

Along with 50 x 96 x 96 in. workspace, No. 846 features 8 in. thick insulated walls, 6 in. insulated floor, aluminized steel interior and exterior, and removable, top-mounted heat chamber. One 7,800 cfm, 5 hp, recirculating blower provides combination airflow to workload, and access to Type 304, 2B finish stainless steel heat chamber interior is facilitated by 2 independent doors (front...

Read More »
LEWCO Designs Oven for Curing Edge Sealants on Structural Composite Beams
Ovens

LEWCO Designs Oven for Curing Edge Sealants on Structural Composite Beams

SANDUSKY, OH - When a leading aerospace company approached LEWCO Application Engineer's with a rather unique curing application, you can bet they figured out the preeminent solution.Â-  The application?  Curing edge sealants on structural composite beams up to 20 ft. long, while maintaining a continuous process to meet production requirements. The solution?  One...

Read More »
BTU to Exhibit with SMarTsol at SMTA Guadalajara 2015
Soldering Machinery

BTU to Exhibit with SMarTsol at SMTA Guadalajara 2015

NORTH BILLERICA, Mass. –Â- BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, today announced that it will showcase its PYRAMAX™ 125N solder reflow system in representative SMarTsol’s booth numbers12-17 at the upcoming SMTA Expo in Guadalajara, Mexico, which is scheduled to take place...

Read More »
Oxidizers

Harper Releases Performance Results of Production Scale Oxidation Oven

Buffalo, NY – Harper International is proud to announce initial data on its 3 meter wide production scale Oxidation Oven for carbon fiber manufacturing, demonstrating outstanding performance for key metrics including air velocity uniformity and temperature uniformity. Data was acquired at temperatures up to 280°C and air velocities up to 4 meters per second. One of theÂ- most...

Read More »
Ovens

LEWCO Delivers 3rd Portable Cabinet Oven to Repeat Customer

LEWCO recently delivered a 500°F electrically heated cabinet oven to a leading supplier of rubber systems and components for the automotive industry. This is the third oven LEWCO has supplied to this loyal repeat customer. Due to the nature of the customer's process, the oven needed to be portable so LEWCO engineers designed the oven to include large, heavy-duty casters at the base....

Read More »
Ovens

LEWCO Conveyor Oven Used to Cure Proprietary Coating on Jet Turbine Blades

SANDUSKY, OH – LEWCO, Inc. recently delivered a custom conveyor oven used to cure a proprietary coating on jet turbine blades.Â-  The 350°F electric oven features a flat wire mesh belt conveyor, a control system that communicates temperature and conveyor speed data to a remote central control PLC, and a unique LEL (lower explosive limit) monitoring system. The customer requested an...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics