Ovens

Wisconsin Oven Ships Gas Fired Powder Coating Batch Oven to Automotive Supplier
Ovens

Wisconsin Oven Ships Gas Fired Powder Coating Batch Oven to Automotive Supplier

East Troy, WI – Wisconsin Oven Corporation announced the shipment of a gas fired heated walk-in batch oven that will be used for curing powder paint on various wheel rims and automotive parts. The powder coating oven has sufficient capacity to heat 1,500 pounds of steel from 70° to 450°F within 45 minutes when loaded into an ambient oven. Powder coating parts is an important process...

Read More »
Top-Loading 650°F Oven achieves 650°F max temperature.
Ovens

Top-Loading 650°F Oven achieves 650°F max temperature.

Constructed with 5 in. insulated walls, aluminized steel interior and exterior, and reinforced 1/4  in. steel plate top, No. 812 features air-operated rear hinged door and wear bars at sides of workspace. Workspace is reinforced for 3,000 lb loading at removable subway grate. While 40 kW installed in Incoloy-sheathed tubular elements heat 72 x 36 x 36 in. workspace, 3,300 cfm, 2 hp recirculating...

Read More »
Cleanroom Conveyor Oven cures low-friction coating onto vials.
Cleanroom Equipment

Cleanroom Conveyor Oven cures low-friction coating onto vials.

Electrically heated Gruenberg NFPA 86 Class A Conveyor Oven curesÂ- thin coating onto glass vials, used in pharmaceutical industry, to produce low-friction surface. This 4-module, 400°C oven, which contains 3 heating chambers and one chamber for cooling, processes 120 vials/min as they advance in trays along >30 ft conveyor belt. Installed in each chamber, 1,750 cfm,...

Read More »
Ovens

Blue M Announces New, Two-Year Warranty on Most Products Shipped within the U.S.

Blue M, an industry leader in the design, engineering, manufacturing and after-market support of industrial lab ovens, and light-industrial furnaces, today announced it has extended its warranty from one year to two year on most parts and labor for the majority of its products shipped within the US. The enhanced warranty does not apply to fan motors and does not cover Blue M's CEO Series...

Read More »
High-Performance Oven for Leading Provider of Paint and Coatings
Ovens

High-Performance Oven for Leading Provider of Paint and Coatings

SANDUSKY, OH – LEWCO, Inc. recently shipped a High-Performance Tote Oven to a leading global technology provider of paint and other coatings. The oven, model HSC08TV, is steam heated and rated for service up to 300°F. The oven is specifically designed to heat (8) 250 gallon totes. Due to installation in an electrically hazardous location, the entire electrical system is rated NEMA 7 9,...

Read More »
Aluminum Melting and Holding Furnace has 13,700 lb max capacity.
Ovens

Aluminum Melting and Holding Furnace has 13,700 lb max capacity.

Along with steel plate construction andÂ- steel member-reinforced shell, aluminum melting and holding furnace (gas fired) features roof-mounted, nozzle-mix radiant burner; pneumatic flue damper; drain tap; and UL-listed control panel. Holding capacity is 13,700 lb, and melting rate is 1,500 lb/hr. While preheat hearth with full width door is used for loading...

Read More »
Walk-In Preheating Oven reaches temperatures up to 900°F.
Ovens

Walk-In Preheating Oven reaches temperatures up to 900°F.

Along with 50 x 96 x 96 in. workspace, No. 846 features 8 in. thick insulated walls, 6 in. insulated floor, aluminized steel interior and exterior, and removable, top-mounted heat chamber. One 7,800 cfm, 5 hp, recirculating blower provides combination airflow to workload, and access to Type 304, 2B finish stainless steel heat chamber interior is facilitated by 2 independent doors (front...

Read More »
LEWCO Designs Oven for Curing Edge Sealants on Structural Composite Beams
Ovens

LEWCO Designs Oven for Curing Edge Sealants on Structural Composite Beams

SANDUSKY, OH - When a leading aerospace company approached LEWCO Application Engineer's with a rather unique curing application, you can bet they figured out the preeminent solution.Â-  The application?  Curing edge sealants on structural composite beams up to 20 ft. long, while maintaining a continuous process to meet production requirements. The solution?  One...

Read More »
BTU to Exhibit with SMarTsol at SMTA Guadalajara 2015
Soldering Machinery

BTU to Exhibit with SMarTsol at SMTA Guadalajara 2015

NORTH BILLERICA, Mass. –Â- BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, today announced that it will showcase its PYRAMAX™ 125N solder reflow system in representative SMarTsol’s booth numbers12-17 at the upcoming SMTA Expo in Guadalajara, Mexico, which is scheduled to take place...

Read More »
Oxidizers

Harper Releases Performance Results of Production Scale Oxidation Oven

Buffalo, NY – Harper International is proud to announce initial data on its 3 meter wide production scale Oxidation Oven for carbon fiber manufacturing, demonstrating outstanding performance for key metrics including air velocity uniformity and temperature uniformity. Data was acquired at temperatures up to 280°C and air velocities up to 4 meters per second. One of theÂ- most...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics