Other Milling Cutters

Milling Cutters machine high-temperature alloys.
Other Milling Cutters

Milling Cutters machine high-temperature alloys.

Available in face and end-mill configurations, ValMILL(TM) V590 provides square, 90° shoulder milling that eliminates need for many secondary operations. ValMILL(TM) V595 offers flute options and multiple inserts to facilitate deep cuts of grooves, slots, cavities, and slab milling. Face Milling ValMILL(TM) V555 incorporates inserts with 5 cutting edges.

Read More »
Other Milling Cutters

Face Mill features positive cutting angle.

Widia M 780 is fitted with square, negative indexable inserts with 8 cutting edges. Four coated grades include TN2510 for machining GTS and GTW cast iron; TN5515 for GGG with low/average hardness up to GGG50, as well as GG and GGV; TN7525 for GGG increased/high hardness from GGG50, as well as steel; and TN450 for GGG increased/high hardness from GGG50 and steel. Three geometries are suited for...

Read More »
Ball Nose Cutter is designed for high-feed milling.
Other Milling Cutters

Ball Nose Cutter is designed for high-feed milling.

Used in semifinishing to heavy roughing operations, R218.20 indexable insert has rigid design with 2 effective teeth. Body incorporates pocket seat with tenon to avoid stress on locking screw, and radius chip space that strengthens cutter center. Available in 0.625-2.00 in. dia sizes with various shank styles, cutter is available with ME and M insert geometries. Inserts have helical curved edge...

Read More »
Pentagonal Face Mills work with variety of materials.
Other Milling Cutters

Pentagonal Face Mills work with variety of materials.

ValMILL(TM) V555 Series inserts feature pentagonal shape with 5 cutting edges. Available in 6 cutter body diameters from 2-6 inches, products require 4-9 inserts each. Recommended max rpm ranges from 19,000-9,000, and depth of cut is 0.200 in. Suited for roughing, semi-finishing, and finish face or surface milling applications, face mills deliver consistent dimensional and surface qualities to...

Read More »
Other Milling Cutters

Square Shoulder Mills provide true 90° corner milling.

Univex Premium Series features high positive geometry and unequal pitch for true 90° design. Offered in both 11 and 17 mm lengths with variety of corner radii, indexable inserts have nickel-plated bodies and thru-the-tool coolant supply. Range of coatings and grades are available to meet specific application needs. Series includes face mills, Weldon shank endmills, and extra length...

Read More »
Mills suit roughing, semi-finishing, and finish machining.
Other Milling Cutters

Mills suit roughing, semi-finishing, and finish machining.

ValMILL(TM) V490 Series square-shoulder face mills have 90° geometry that enables multitask cutting for applications such as shoulder milling, slot and channel milling, edge trimming, and face or surface milling. Three coated grades of inserts include 2 multi-layer PVD TiAIN/TiN coatings and TiN/A1203/TiCN MTCVD for tough machining. Mill sizes available are 2, 2.5, 3, 4, 5, and 6 in. dia...

Read More »
Face/End Mills generate 90° square shoulder.
Other Milling Cutters

Face/End Mills generate 90° square shoulder.

ValMILL(TM) V590 Cutters accommodate ramping and helical interpolation. They eliminate secondary machining operations that are required when producing 90° square shoulders. Nine square shoulder, coolant-thru end mills and 7 face mills are available. Machining speeds of 12,200-40,000 rpms can be obtained depending on tool size. End mills range in diameter from 0.625-1.500 in. with 2-5...

Read More »
Face Mills increase productivity.
Other Milling Cutters

Face Mills increase productivity.

Series KSOM Octagonal Insert Face Mills are Â-¼ in. thick with ¾ in. inscribed circle. Tool-steel insert pockets are machined in hardened state so they won't deflect. Face mills can be fed at up to 0.030 in. feed per tooth. Screw and finger-clamps keep inserts from moving under extreme cutting forces. Ranging in diameter from 2.5-6 in., units provide 8 cutting edges per insert,...

Read More »
Keyway Cutter machines parts and keyways in one operation.
Other Milling Cutters

Keyway Cutter machines parts and keyways in one operation.

New Axis(TM) Keyway Cutter machines keyways and splines without spindle rotation in bores down to ½ in. dia. Harnessing pressure of machining center's coolant system, product combines keyway cutting with turning/boring operations. Unit is available 5 shank sizes and 4 head sizes, each matched with one of 3 cutter diameters. Positive displacement ball piston motor achieves speeds and torque...

Read More »
Cutters increase productivity in aluminum milling.
Other Milling Cutters

Cutters increase productivity in aluminum milling.

Dihart Cutters utilize inserts with polycrystalline diamond tips for longer tool life and improved surface finishes. Additional tool pre-setting is eliminated since cutting edges are soldered on. Multiple cutting edges provide high level of repeatability. Cutters are suitable for both face milling and end milling. Full range of standard sizes is available; with up to 125 mm diameter bores.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers