Oscillators

Programmable Oscillator provides 300 MHz frequency.
Oscillators

Programmable Oscillator provides 300 MHz frequency.

JITO®-2 Oscillator is offered in all metal, 8- and 14-pin, DIP and plastic, surface-mount packages, in addition to 5 x 7.5 mm ceramic package. Frequency stabilities are ±100, ±50, or ±25 ppm over temperature range of -40 to +85°C, and ±20 ppm over temperature range of -20 to +70°C.

Read More »
Oscillators

Spread Spectrum Oscillators reduce EMI without design changes.

Drop-in replacements for conventional oscillators, EQ-HM24s are available in 14 pin DIP packages with gull-wing SMD leads and can cope with -40 to +85°C operating temperatures. Available in 8.0 to 165 MHz versions, they slowly sweep around or below center frequency, allowing electronic devices to comply with appropriate EMI standards. Using SST clock oscillators has no impact on system...

Read More »
Crystal Oscillator operates as low as 1.6 V.
Oscillators

Crystal Oscillator operates as low as 1.6 V.

F4500 offers input voltage of 1.8 V ±5%, frequency range of 30 to 70 MHz, and maximum input current of 15 mA. It is housed in 5 x 7.5 mm ceramic package. Stabilities are 25, 50, and 100 ppm at both -10 to 70 deg C and -40 to 85 deg C. System efficiency is achieved through oscillator's direct connection to system's processor, which eliminates extra circuitry. F4500 Series is suitable for low...

Read More »
Oscillators

VCXOs and Clocks work with 10 Gigabit Ethernet and SONET.

PECL voltage controlled crystal oscillators and reference clocks support applications for WAN and LAN environments. Model 352 VCXO and Model 652 reference clock have choice of two switched outputs and can combine frequencies from 150 to 1,000 MHz. Model 352 VCXO maintains frequency stability of +/-20 ppm while Model 652 clock maintains stability at +/-30 ppm. Both operate in temperatures of -40...

Read More »
Clock Oscillators have low profile of 2.0 mm.
Oscillators

Clock Oscillators have low profile of 2.0 mm.

Ultra Low Voltage 5X7 HCMOS Clock is available at 1.6 V and 20 mA with frequency range of 30 to 70 MHz. Low Current 5X7 HCMOS Clock features supply current as low as 3.0 mA at 2.7 or 3.3 V with upper rating of 4.6 mA at 5 V. Frequency range is 4.0 to 30 MHz. Both clocks offer low jitter specification of 1.0 psec RMS. Standard frequency stability is +/-50 ppm, however tighter tolerances are...

Read More »
Voltage Controlled Crystal Oscillator fits SONET applications.
Oscillators

Voltage Controlled Crystal Oscillator fits SONET applications.

MPV3 (3.3 V) and MPV5 (5.0 V) series 800 MHz VCXOs are suitable for stability and aging requirements of SONET/STM, Fibre Channel, Ethernet, and Optical Carrier applications, and meet requirements of Forward Error Correction (FEC) applications. Both are supplied in 9 x 14 mm surface mount package with single and dual complementary PECL outputs, and are available in frequencies of 1 to 800 MHz....

Read More »
Voltage-Controlled Oscillator uses internal SAW resonator.
Oscillators

Voltage-Controlled Oscillator uses internal SAW resonator.

Surface-mount M650 Series uses high Q resonator, operating at fundamental frequency of end unit, to provide low-jitter frequency translation in telecommunications applications. Oscillator has 3.3 V operation, output frequencies from 155 to 900 MHz, and ground plane for added phase noise performance, with -93dBc/Hz@1KHz offset typical. Applications include clock smoothing, frequency translation,...

Read More »
Clock Recovery Modules suit OC-192 and 10GbE markets.
Oscillators

Clock Recovery Modules suit OC-192 and 10GbE markets.

M840 Series multi-rate clock recovery modules use phase-lock loop architecture and low-noise SAW VCO to provide low jitter clock and data outputs for fiber optic networks. Typical data output jitter at 9.953 GB/s is less than 8ps p-p. First module in M840 Series is available with data rates of 9.953, 10.3125, 10.664 and 10.709 Gb/s integrated into single unit. Key features include low noise and...

Read More »
Oscillators

Crystal Oscillator works in high-speed digital systems.

SD-A2920 Series Differential PECL Fast Edge Model is available in frequency ranges from 75.0 MHz to 200.0 MHz, making it suited for wideband frequencies such as Fibre Channel, Gigabit Ethernet, Infiniband, 10 Gbit, and Sonet. Supply voltages of 3.3 and 2.5 V are available. Applications include high speed, low jitter components, such as mainframes, storage, servers, workstations and networks.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers