Oscillators

Oscillators

Crystal Oscillator offers holdover stability.

Available in 28 x 36 x 19 mm package with supply voltage of 12 V, Model DX-170 features temperature stability of 0.2 ppb over 0-70°C or 0.4 ppb over -20 to 70°C, and long term aging of 25 ppb/year. Double oven controlled crystal oscillator is available with either HCMOS or sinewave output and is suitable for telecom, measurement, and military applications.

Read More »
Oscillators

Feature-Rich VCSO suits wireline and wireless networks.

Supplied in 5.0 x 7.5 x 2.5 mm LCC package, VS-705 single rate voltage-controlled SAW oscillator (VCSO) meets needs for high-frequency precision clocking. Flexibility lets engineers select +2.5 or +3.3 V power supplies, output logic types, and Absolute Pull Ranges up to ±100 ppm. Along with 125 MHz to 1 GHz operating range, VCSO offers output enable logic that can be configured for Enable...

Read More »
Oscillators

Low-Power SSXO simplifies EMI compliance in electronics.

With power supply requirement of less than 10 mA and EMI emission reduction, M-Series Spread Spectrum Crystal Oscillator (SSXO) is suited for use as timing solution for applications that need to control EMI resulting from memory access. It operates in 16-66.667 MHz range and can be powered from 2.5 or 3.3 V supply. Options include modulation control, allowing either center spread with spread...

Read More »
VCO operates from 4,267 to 4,442 MHz.
Oscillators

VCO operates from 4,267 to 4,442 MHz.

Available with control voltage range of 0.1-16 V, CVCO55CC-4267-4442 VCO suits aplications in digital radio equipment, fixed wireless access, and base stations. Features include phase noise of -104 dBc/Hz at 10 KHz offset, pulling and pushing minimized of 3.00 MHz and 0.50 MHz/V, respectively, and second harmonic suppression of -20 dBc typ. Output power of oscillator is typically +5.0 dBm with...

Read More »
Oscillators

OCXO suits base station and SDH/SONET applications.

Designed for wireless and telecom industries, C4500A1-0115 5 MHz low aging SC-Cut OCXO has low profile of 10 mm. It features 20 x 20 mm THT enclosures, stability of better than ±8 ppb, less than 50 ppb aging over 6 yrs, and LVCMOS and sine wave output. At 5 MHz, unit offers typical phase noise of -100 dBc/Hz at 1 Hz; 120 dBc/Hz at 10 Hz; -140 dBc/Hz at 100 Hz; -145 dBc/Hz at 1 kHz; and 150...

Read More »
Oscillators

LVDS VCXO has 0.75 MHz to 1.0 GHz frequency range.

Supplied in 7 x 5 mm package, FVXO-LC72 operates from 2.5 V and utilizes ASICs designed with focus on noise reduction technologies as well as lower levels of jitter. Configurable frequency control solution employs third order Delta Sigma Modular to reduce noise, while additional technologies enable selection of output type, input voltages, and temperature performance features. RoHS-compliant...

Read More »
VCO operates from 3,901-4,101 MHz.
Oscillators

VCO operates from 3,901-4,101 MHz.

Available with control voltage range of 0.1-16 V, CVCO55CC-3901-4101 VCO is suited for use in applications such as digital radio equipment and base stations. Packaged in 0.5 x 0.5 in. SMD package, unit features typical phase noise of -104 dBc/Hz @ 10 KHz offset, output power of +5.0 dBm, and second harmonic suppression of -20 dBc typical. Input voltage is 8 V, with max current consumption of 40...

Read More »
Oscillators

PLL Integrated Circuit supports synchronous Ethernet.

Offering 5 x 7 mm quartz-based PLL solution, Model CD-700 can be phase lock looped to 25 MHz reference that varies as much as ±100 ppm and can provide clock-smoothed output with less than 1 ps rms over 12 kHz to 20 MHz jitter. Unit includes digital phase detector, op-amp, and additional integrated functions for use in digital synchronization applications. Product delivers low jitter timing...

Read More »
Voltage Controlled Oscillator operates from 3,619-3,711 MHz.
Oscillators

Voltage Controlled Oscillator operates from 3,619-3,711 MHz.

Supplied in 0.5 x 0.5 in. SMD package, CVCO55CC-3619-3711 operates from 3,619-3,711 MHz with control voltage range of 0.1-16 V. Typical phase noise is -106 dBc/Hz @ 10 KHz offset, and output power is +5.0 dBm typ. Input voltage is 8 V, with max current consumption of 40 mA; pulling and pushing are minimized to 3.00 MHz and 0.50 MHz/V, respectively; and second harmonic suppression is -20 dBc typ....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers