Oscillators

Resonators have tolerance of ±25 kHz at 433.92 MHz.
Oscillators

Resonators have tolerance of ±25 kHz at 433.92 MHz.

With a footprint of 3 x 3 mm2, SAW resonators are mounted on quartz substrate in hermetically sealed package. AEC-Q200 qualified units have operating temperature range between -45 and +125°C. Model R990 (433.92 MHz) and R991 (315 MHz) are suitable for high-precision wireless transmitters in automotive electronic applications such as remote keyless entry and tire pressure monitoring systems...

Read More »
VCO features ultra low phase noise.
Oscillators

VCO features ultra low phase noise.

Model V950ME22-LF VCO in C-band operates at 4,400-5,000 MHz with tuning voltage range of 0-9.5 Vdc. Typical phase noise is -89 dBc/Hz @ 10 kHz offset and typical tuning sensitivity is 120 MHz/V. Operating over temperature range of -40 to +85Â-ºC, RoHS-compliant unit delivers output power of 3 dBm at 10 Vdc supply while drawing 25 mA. It is available in MINI-14S package measuring 0.5 x 0.5 x...

Read More »
Oscillators

Sub-Miniature OCXO features low power consumption.

Available in through-hole and surface mount configurations, DIP NVG79 OCXO series features low start-up power requirements, low steady state power, and rapid warm-up time. RoHS compliant OCXO measures only 0.355 in. high and offers wide frequency range of 20 kHz to 54 MHz. Device is configured for mobile communication and mobile data transmission systems in telecom, utility, industrial, and...

Read More »
Crystal Controlled Oscilllators offer 2.5 or 3.3 V operation.
Oscillators

Crystal Controlled Oscilllators offer 2.5 or 3.3 V operation.

Housed in 5 x 7 mm surface mount package, LM Series provides LVDS differential outputs with enable/disable function, while PM Series provides LVPECL differential outputs. Frequency range of 25-670 MHz covers applications in SONET, GE, FC, G.709, OTU1, OTU2, 10GE copper and fiber, 10GEFC, SAS, HDVUSA, HDVEUR, and DDR clock rates. Operating from -40 to 85°C, RoHS-compliant oscillators feature...

Read More »
VCXOs feature frequency range of 0.75 MHz to 1.0 GHz.
Oscillators

VCXOs feature frequency range of 0.75 MHz to 1.0 GHz.

Housed in 5.0 x 3.2 mm package, 2.5 V XpressO FVXO-PC52 LVPECL Oscillators employ third order Delta Sigma Modulator to minimize noise levels. Units offer frequency resolution to 6 decimal places, absolute pull range of +50 ppm, and operating temperature of -20 to +70°C or -40 to +85°C. Constructed with gold over nickel termination finish, oscillators are fully RoHS-compliant and have...

Read More »
Clock Oscillator operates from -55 to +105°C.
Oscillators

Clock Oscillator operates from -55 to +105°C.

Designed using SAW (surface acoustic wave) crystal technology, 1.090 GHz CCSO-014-1090 provides low noise, low jitter performance with true-sinewave output of +12 dBm min. It features +12 V input voltage, -138 dBc/Hz phase noise at 10 kHz offset, second harmonic of -40 dBc maximum, and has no sub-harmonic. Suited for Identification Friend or Foe applications, oscillator is available in 14 PIN DIP...

Read More »
Oscillators

CMOS Oscillators come in 2.5 and 3.3 Vdc configurations.

Offered in 3.2 x 5.0 and 5.0 x 7.0 mm packages, 32.768 kHz ceramic surface mount crystal clock oscillators EB13K5 and EB13K7 (3.3 Vdc) and (2.5 Vdc) EB15K5 and EB15K7 are available in variety of configurations including frequency stabilities as low as ±20 ppm maximum and wide operating temperature ranges of -40 to +85°C. Oscillators are suited for industrial controls, office...

Read More »
Oscillators feature user selectable multi frequency.
Oscillators

Oscillators feature user selectable multi frequency.

Incorporating low frequency crystal with low jitter synthesis, CSMF series clock oscillators and VSMF series VCOs are based on advanced Digital PLL Platform that can be pre-programmed for up to 2 different output frequencies within 10-1,200 MHz range. Operating voltage for both units is from 2.5-3.3 V at 35-45 mA within their frequency range, with rms phase jitter at 0.8 ps typical within...

Read More »
VCO has low phase noise of -105 dBc/Hz at 10 kHz offset.
Oscillators

VCO has low phase noise of -105 dBc/Hz at 10 kHz offset.

Operating from 200-400 MHz with control voltage range of 0.0-5.0 V, CRBV55CW-0200-0400 Red Box VCO is enclosed in 1.25 x 1.25 x 0.58 in. aluminum enclosure with SMA connectors, enabling plug-and-play integration into any application. Features include output power of 3 dBm typical, input voltage of 5 V, with max current consumption of 15 mA, and second harmonic suppression of -10 dBc typical....

Read More »
Oscillators

OPO Device simplifies long-wavelength MPE microscopy.

Chameleon OPO (Optical Parametric Oscillator) utilizes periodically poled crystal and facilitates access to tunable near-IR wavelengths for multiphoton excitation microscopy (MPE). Used with any Chameleon ultrafast lasers, OPO delivers continuous gap-free tuning from 1,000 nm to over 1,600 nm with up to 600 mW of specified output power. Wavelength of Chameleon oscillator and OPO can be tuned...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers