Oscillators

Wideband VCO targets satellite communication systems.
Oscillators

Wideband VCO targets satellite communication systems.

Generating frequencies from 5,000-6,000 MHz, Model SMV5550B-LF features tuning voltage of 0-10 V and exhibits -80 dBc/Hz phase noise at 10 kHz from carrier. Voltage controlled oscillator delivers 3 ±3 dBm into 50 W load with nominal 5 V supply and 24 mA current. Housed in 0.3 x 0.3 x 0.08 in. SUB-L surface mount package, VCO operates from -40 to 85°C, exhibits second harmonic...

Read More »
Oscillators

Silicon Timer IC requires 1 resistor and 1 capacitor.

Housed in 2 x 2 mm TDFN-8 package, Model TS3002 is fully specified to operate at 1 V while consuming 1 Â-µA supply current at output frequency of 25 kHz. Single-supply CMOS oscillator/timer requires just 1 resistor and 1 capacitor to set output frequency. Operating from -40 to +85°C with FOUT Period Drift of 0.044%/°C, device is suited for portable and battery-powered equipment.

Read More »
Voltage Controlled Oscillator delivers +3 dBm output power.
Oscillators

Voltage Controlled Oscillator delivers +3 dBm output power.

Operating at 5,200 MHz, Model CVCO33BE-5200-5200 features control voltage range of 0.5~4.5 V and typical phase noise of -84 dBc/Hz at 10 kHz offset. Input voltage is 5 V, with max current consumption of 26 mA. Pulling and pushing are minimized to 6.0 MHz and 3.0 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, oscillator is suited for digital radio equipment, fixed wireless access,...

Read More »
TCXO is suited for mobile, battery-powered applications.
Oscillators

TCXO is suited for mobile, battery-powered applications.

Supplied in 5 x 7 mm ceramic package, T72 Series offers stability to ±0.2 ppm from -40 to +85°C, g-sensitivity of less than 1 x 109, phase noise floor of 159 dBc/Hz, and current consumption down to 1 mA typ. TCXO, available from 10-50 MHz, offers clipped sine wave output and 3.3 V supply range. Electronic frequency control is provided for tuning or phase locking applications....

Read More »
Clock Oscillator controls frequency for HD audio equipment.
Oscillators

Clock Oscillator controls frequency for HD audio equipment.

Featuring close-in phase noise of -100 dBc/Hz at 10 Hz offset and typical noise floor of -170 dBc/Hz at 100 kHz offset, Model CCHD-957 is suited for DACs, ADCs, DAB, and professional CD audio equipment. HCMOS clock oscillator includes Standby Function - when placed in disable mode, internal oscillator is completely shut down and output buffer is placed in Tri-State. Housed in 9 x 14 mm SMT...

Read More »
Voltage Controlled Oscillator operates from 2,230-2,240 MHz.
Oscillators

Voltage Controlled Oscillator operates from 2,230-2,240 MHz.

With control voltage range of 0.1~4.9 V, Model CVCO55CC-2230-2430 features typical phase noise of -106 dBc/Hz at 10 kHz offset. Input voltage is 5 V with max current consumption of 32 mA, and output power is typically +3 dBm. Pulling and pushing are minimized to 1.0 MHz and 2.5 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, USA-made VCO is suited for digital radio equipment, fixed...

Read More »
High-Frequency Oscillators offer 8-12 GHz electrical tuning.
Oscillators

High-Frequency Oscillators offer 8-12 GHz electrical tuning.

Using high-Q dielectric resonators, DRO Series is designed for up/down converter systems requiring ultra-low phase noise (-110 dBc/Hz @ 10 kHz offset) LO solution. Electrical tuning option for the version operating at 10 GHz has control range of 0-12 Vdc, promoting ultra-fine tuning precision. Electrical tuning provides ±3 MHz of frequency control, facilitating and accelerating oscillator...

Read More »
Wide-Band VCO suits communications systems and base stations.
Oscillators

Wide-Band VCO suits communications systems and base stations.

Operating from 1,200-2,100 MHz with control voltage range of 0.5-25 V, CVCO55CW-1200-2100 features typ phase noise of -95 dBc/Hz @ 10 kHz offset and has typ output power of +6 dBm. U.S. manufactured product comes in 0.5 x 0.5 in. SMD package, accepts 12 V input, and has max current consumption rating of 35 mA. Pulling and Pushing are minimized to 25.0 MHz and 10.0 MHz/V, respectively, and second...

Read More »
OCXOs feature customizable frequency from 30-130 MHz.
Oscillators

OCXOs feature customizable frequency from 30-130 MHz.

Measuring 1.0 x 1.0 x 0.460 in., Apollo Series is suited for applications requiring noise performance out to 100 kHz offset. Devices offer power output of 15 dBm, tight stabilities of ±50 ppb over temperature, and low power consumption of 1.5 W at 25°C. Also available in RoHS-compliant version, oscillators are suited for medical imaging equipment, telecommunications, up/down frequency...

Read More »
Oscillators

Oven Controlled Crystal Oscillator includes oven failure alarm.

Housed in low-profile case measuring 36.0 x 26.5 x 8.5 mm, Model OX0325-1000-100 features 10 MHz CMOS output and frequency tolerance of ±0.02 ppm over 0-70°C temperature range. Oscillator runs from 5 V, draws 470 mA at switch-on, and averages less than 220 mA at 25°C after warm-up. Phase noise is -165 dBc/Hz at greater than 10 KHz offset. Mechanical shock, thermal shock and...

Read More »

All Topics