Oscillators

Programmable Oscillators offer RMS phase jitter down to 0.4 ps.
Oscillators

Programmable Oscillators offer RMS phase jitter down to 0.4 ps.

Housed in 5.0 x 3.2 x 1.2 mm hermetically sealed ceramic package,Â- IQXP-20 clock oscillator and IQXP-30 voltage controlled oscillator are available with frequency range from 10.0 MHz to 1.5 GHz and HCMOS output capable of driving 15 pF. Customers can choose from 2.5 or 3.3 V supply for both models. Operating from -40 to +85°C, oscillators offer frequency stabilities down to ±10...

Read More »
Oscillators

TCXOs provide custom frequencies up to 250 MHz.

Part of FXTC-HE73 series, HCMOS XpressO-TC Oscillators offer frequency stability of ±2.5 ppm across extended temperature range of -40 to +85°C. Units are based on proprietary ASIC technology with 3rd order Delta Sigma Modulator to minimize noise. ASIC family enables selection of output type, input voltages, and temperature performance. TCXOs are suited for low jitter applications,...

Read More »
Crystal Oscillator offers wide frequency stability.
Oscillators

Crystal Oscillator offers wide frequency stability.

Offered in 5 x 7 x 3 mm package with frequency range of 10–52 MHz, TX057 Stratum III compatible TCXO features low phase noise of -90 dBc/Hz at 10 Hz and -150 dBc/Hz at 10 KHz. Unit provides frequency stabilityÂ- of Â±.28 ppm from -40 to +85°C and overall frequency stability of ±4.6 ppm, including 20 years aging. Available with Clipped Sine or CMOS...

Read More »
Oscillators

Clock Oscillators offer programmed or configurable frequencies.

Offered in 5 x 7, 5 x 3.2, and 3.2 x 2.5 mm ceramic packages, Rubyquartz XCO and XVO are available with LVCMOS, LVPECL, and LVDS outputs and offer RMS phase jitter of 0.6 ps typÂ- from 12 KHz to 20 MHz. Power supply voltages are available at 3.3 and 2.5 V, and version is available with frequency stability of ±20 ppm. While XCO offers ability to select between 1–4 factory-programmed...

Read More »
S-Band Voltage Controlled Oscillator features linear tuning.
Oscillators

S-Band Voltage Controlled Oscillator features linear tuning.

Operating from 3,100–3,500 MHz with tuning voltage range of 1–12 Vdc, model V846ME24-LF provides better than 1.1:1 tuning linearity. RoHS-compliant VCO has spectrally clean signal of -114 dBc/Hz @ 100 kHz offset andÂ- typical tuning sensitivity of 62 MHz/V. Designed to deliver 3 dBm output power into 50 Ω load while operating off 5 Vdc supply and drawing 22 mA typ,...

Read More »
Oscillators

L-Band VCO suppresses 2nd harmonic to better than -13 dBc.

Housed in 0.2 x 0.2 x 0.06 in.Â- standard package, Model USSP1217-LF operates at frequency range of 1,210–1,230 MHz with tuning voltage of 0.5–3.0 Vdc. Unit features phase noise of -102 dBc/Hz at 10 kHz offset while operating from 3.3 Vdc supply and drawing 13 mA of current. Providing output power of 3±3 dBm into 50 Ω load, RoHS-compliant VCO...

Read More »
Voltage Controlled Oscillator delivers +7 dBm output power.
Oscillators

Voltage Controlled Oscillator delivers +7 dBm output power.

Operating from 2,610-2,625 MHz with control voltage range of 0.5~4.5 V, Model CVCO55CC-2610-2625 features typical phase noise of -120 dBc/Hz at 10 KHz offset. Input voltage is 8 V, with max current consumption of 30 mA,Â- and pulling and pushing are minimized to 2.0 MHz and 0.2 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, device is suited for digital radio equipment,...

Read More »
Oscillators

Miniaturized Hybrid Crystal Resonator offers ±50 ppm tolerance.

Supplied in 2016 package for specific frequencies of 24, 25, 26, 27, and 30 MHz, XRCGB-F-N series features ±50 ppm tolerance and is suited for such consumer and industrial market applications as platform control hubs, wired Ethernet, and application/graphic processors. Hybrid Crystal Resonator (HCR) eliminates need to change board layout; all HCR products can share same pads of larger...

Read More »
Voltage Controlled Oscillator delivers +2 dBm output power.
Oscillators

Voltage Controlled Oscillator delivers +2 dBm output power.

Operating from 1,662-1,708 MHz with control voltage of 0.5-4.5 V, Model CVCO33BE-1662-1708 features typical phase noise of -106 dBc/Hz at 10 KHz offset. Input voltage is 5 V with max current consumption of 20 mA. Pulling and Pushing are minimized to 5.0 MHz and 5.0 MHz/V, respectively, and second harmonic suppression is -15 dBc typical. Housed in 0.5 x 0.5 in. SMD package, USA-made VCO is suited...

Read More »
Oscillators

TCXO promotes reliability, precision for mobile electronics.

Available from 10-50 MHz in 5 x 7 mm ceramic package, T70 series offers HCMOS output and 3.3 V supply voltage. Model T71 specifically offers clipped sine wave output and 5.0 V supply, and electronic frequency control is provided for precise tuning or phase locking applications. Stability is rated to ±0.2 ppm from -40 to +85°C, Phase Noise floor is -155 dBc/Hz (typ 10 MHz), and current...

Read More »

All Topics