Oscillators

Voltage Controlled Oscillator delivers +7 dBm output power.
Oscillators

Voltage Controlled Oscillator delivers +7 dBm output power.

Operating from 2,610-2,625 MHz with control voltage range of 0.5~4.5 V, Model CVCO55CC-2610-2625 features typical phase noise of -120 dBc/Hz at 10 KHz offset. Input voltage is 8 V, with max current consumption of 30 mA,Â- and pulling and pushing are minimized to 2.0 MHz and 0.2 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, device is suited for digital radio equipment,...

Read More »
Oscillators

Miniaturized Hybrid Crystal Resonator offers ±50 ppm tolerance.

Supplied in 2016 package for specific frequencies of 24, 25, 26, 27, and 30 MHz, XRCGB-F-N series features ±50 ppm tolerance and is suited for such consumer and industrial market applications as platform control hubs, wired Ethernet, and application/graphic processors. Hybrid Crystal Resonator (HCR) eliminates need to change board layout; all HCR products can share same pads of larger...

Read More »
Voltage Controlled Oscillator delivers +2 dBm output power.
Oscillators

Voltage Controlled Oscillator delivers +2 dBm output power.

Operating from 1,662-1,708 MHz with control voltage of 0.5-4.5 V, Model CVCO33BE-1662-1708 features typical phase noise of -106 dBc/Hz at 10 KHz offset. Input voltage is 5 V with max current consumption of 20 mA. Pulling and Pushing are minimized to 5.0 MHz and 5.0 MHz/V, respectively, and second harmonic suppression is -15 dBc typical. Housed in 0.5 x 0.5 in. SMD package, USA-made VCO is suited...

Read More »
Oscillators

TCXO promotes reliability, precision for mobile electronics.

Available from 10-50 MHz in 5 x 7 mm ceramic package, T70 series offers HCMOS output and 3.3 V supply voltage. Model T71 specifically offers clipped sine wave output and 5.0 V supply, and electronic frequency control is provided for precise tuning or phase locking applications. Stability is rated to ±0.2 ppm from -40 to +85°C, Phase Noise floor is -155 dBc/Hz (typ 10 MHz), and current...

Read More »
Electronic Amplifiers

M/A-COM Technology Solutions Extends Leadership in System Solutions with New 42GHz SMARTSET Chipset

Chipset Offers an Integrated and Cost Effective Solution for OEM Customers Montreal, QC, - M/A-COM Technology Solutions Inc. (M/A-COM Tech), a leading supplier of high performance analog semiconductor solutions, introduced today at the International Microwave Symposium (IMS/MTT-S) Trade Show, in Montreal, Canada, a 42GHz SMARTSET Chipset for point-to-point radio applications. Using a...

Read More »
SMD True Sinewave VCXO combines high frequency, low noise floor.
Oscillators

SMD True Sinewave VCXO combines high frequency, low noise floor.

Supplied in 9 x 14 mm SMD package, CVSS-945 True SineWave Voltage Controlled Crystal Oscillator (VCXO) provides -172.9 dBc/Hz noise floor at 1 MHz offset and ±20 ppm min APR pullability. Product is engineered to MIL-STD-883 and MIL-STD-202 specifications and generates frequencies from 50-125 MHz, with output level of +5 dBm min into 50 Ohms and harmonics lower than -25 dBc. Also, VCXO...

Read More »
Oscillators support multiple frequency outputs from single pin.
Oscillators

Oscillators support multiple frequency outputs from single pin.

Offering direct replacements for FOX XpressO oscillators, XCO and XVO Oscillators are available with LVCMOS, LVPECL, and LVDS outputs. Units feature very low RMS phase jitter of 0.6 ps in 12 KHz to 20 MHz bandwidth. Power supply voltages are available at 3.3 and 2.5 V. Supplied in 5 x 7, 5 x 3.2, and 3.2 x 2.5 mm ceramic packages, oscillators are available in versions with overall frequency...

Read More »
Oscillators

Clock Oscillator operates at temperatures from 25-200°C.

Housed in 7 x 5 mm dual hermetically sealed ceramic package with gold plated kovar leads attached using eutectic brazing process, LHAT Series is available with frequency range of 320 kHz to 50 MHz. Frequency stabilities are ±100 ppm over 25-150°C and ±175 ppm over 25-200°C. Operating at 3.3 V, CMOS output clock oscillator withstands shock and vibration as per MIL-STD-202G...

Read More »
Surfae Mount VCO operates at 3,200 MHz.
Oscillators

Surfae Mount VCO operates at 3,200 MHz.

Operating at 3,200 MHz with control voltage range of 0.5-4.5 V, CVCO55CCQ-3200-3200 VCO (Voltage Controlled Oscillator) features typical phase noise of -115 dBc/Hz @ 10 kHz offset and typical output power of +6 dBm. U.S. manufactured product, supplied in 0.5 x 0.5 in. SMD package, has input voltage of 6 V and typical current consumption of 27 mA. Pulling and pushing are minimized to 0.3 MHz and...

Read More »
Integrated Laser and Optical-parametric Oscillator provide photoacoustic imaging.
Lasers

Integrated Laser and Optical-parametric Oscillator provide photoacoustic imaging.

Integrating green-pumped Scan Series optical-parametric oscillator and Quanta-Ray® pump laser, alphaScan(TM) aids tumor detection and cancer research. System delivers greater than 50 mJ of pulse energy in near infrared, useful for biological applications utilizing hemoglobin absorption region. With rapid-scan option, system can tune up to 100 nm between alternating pulses for simultaneous...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics