Folded Covers protect equipment.
Covers

Folded Covers protect equipment.

Folded covers are available in wide range of materials to suit environment, from light duty dust to harsh abrasives. They have internal support system consisting of stiffeners or ribs made from rigid PVC and die cut to fit guide configurations of equipment to be protected. Folded bellows have maximum open-to-close ratio, useful in limited space. Mounting end plates can be engineered and...

Read More »
Flexible Discs grind and blend in one step.
Wheels

Flexible Discs grind and blend in one step.

Cotton fiber layers in Cut-N-Finish discs are impregnated with aluminum oxide grains and then pressed and bonded together, so discs constantly reveal fresh abrasives as they work. Suitable for edge grinding, surface blending, and working fillet welds on stainless steel and aluminum, discs are available in 4 1/2 and 7 in. sizes, and in A24, A36, A54, and A80 grit sizes in both flexible and medium...

Read More »
Pleated Filter meets ASHRAE 52.2 Standard.
Cleaning Equipment

Pleated Filter meets ASHRAE 52.2 Standard.

Type DP8 pleated panel filter has media made from 100% synthetic fibers enhanced with electrostatic charge to increase efficiency on particles sized one micron and below. It meets MERV8 rating per ASHRAE Standard 52.2 and provides 30-35% dust spot efficiency per ASHRAE Standard 52.1. Media is pleated with galvanized steel expanded metal backing to form consistently shaped pleats and prevent rust....

Read More »
Laser Lenses fit most laser cutting systems.
Laser Components

Laser Lenses fit most laser cutting systems.

Black Magic laser lenses have radioactive-free coating that provides ease of cleaning and resistance to scratching. Made from ZnSe, lenses have absorption of less than 0.15%, bulk absorption of less than 0.0005 cm-1 at 10.6m, and surface quality of 20-10 scratch. Thickness tolerance is rated at +0.1 mm., diameter tolerance is +0.0., and edge thickness variation is 0.025mm. Lenses have 90% clear...

Read More »
Shielded Connector minimizes electrical interference.
Connectors

Shielded Connector minimizes electrical interference.

Micro-Link connector has 360° aluminum mylar foil shield to minimize electrical interference that can disrupt signal from connector to control device. Gold-plated contacts provide long life, improved conductivity, and corrosion resistance. Rated NEMA 6P and IP 68, connectors can be used for quick disconnect of proximity sensors, photoelectric sensors and switches, hydraulic and pneumatic...

Read More »
Pipes

Electrofusion System joins company's piping systems.

MSA 250SE Electrofusion Joining Machine reduces installation time and costs when joining company's Fuseal II, Fuseal Squared and PPro-Seal Piping Systems. It uses bar code system with fusion parameters pre-programmed into machine to eliminate manual data entry and save installer time. Machine can fuse up to 4 joints at one time, operate from on-site or generator power, and has long cables to...

Read More »
Inserts

Milling Cutters work fast and efficiently.

Fix-Perfect aluminum milling cutter inserts have on-edge orientation and 34 deg positive rake angle. This geometry reduces insert edge buildup, improves tool life, and provides free cutting action that makes it possible to machine thin-walled parts. Inserts are available in uncoated, coated, and polycrystalline diamond versions.

Read More »
Motorized Microscope comes with multi-user software.
Microscopes

Motorized Microscope comes with multi-user software.

BX61 microscope and MicroSuite software create user-friendly general purpose imaging system. Microscope has built-in motorized Z-drive with 0.01Â-µ resolution and can be equipped with nosepiece, condenser, reflected light or fluorescence illuminator, and up to three 6-position filter wheels in various locations. Software allows user to change between various modes of observation, phase...

Read More »
Cameras

Tiny Video Camera can be installed anywhere.

Lightweight and compact DXC-C33 video camera measures 32 x 38 x 40 mm and weighs 48 g, making it easy to install in space-restricted environments. Camera's 1/3-in. CCD sensor provides horizontal resolution of 850 TV lines, 768 x 494 effective pixels, and 62 dB signal-to-noise ratio. Its minimum illumination is 2000 lx at F8. It has digital video (DV) output, making it suitable for applications...

Read More »
Connectors allow for off-axis insertion.
Connectors

Connectors allow for off-axis insertion.

P-lok® connectors with integrated RADSOCK® socket technology provide positive-locking, spring-loaded coupling. 8 AWG P-lok contacts handle currents up to 69 A while size 4 AWG handle up to 120 A. Features include hyperbolic stamped grid configurations and Push-Pull systems. Thermal rise data after 500 cycles of durability is as follows: Size 8 AWG socket has 38°C at 46 A; Size 4...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers