Optical Beam Splitters

Optical Beam Splitters

Optical Couplers, Transceivers meet telecom/datacom requirements.

Intended for telecom, datacom, and military applications, multi-mode and single-mode optical tap, splitter, and star couplers feature simplistic connector terminations and come in ruggedized housings that isolate fused fiber area. Miniature 2 x 12 channel (TX=RX) single on-board transceiver system supports next generation Infiniband and Ethernet standards as well as other emerging intra box...

Read More »
Optical Beam Splitters

Fiber Coupler/Splitters feature fused biconical tapered process.

Built on fused biconical tapered (FBT) process and proprietary packaging platforms, 1X3 polarization maintaining (PM) truly-fused fiber coupler/splitters offer high extinction ratio with polarization launch into single- or dual-axis (slow axis and fast axis). Tests have shown PER of greater than 18 dB and uniform split ratios. Harsh-environment resistant productsÂ- are suited for use in...

Read More »
Beam Splitters and Combiners suit CO2 lasers up to 100 W.
Optical Beam Splitters

Beam Splitters and Combiners suit CO2 lasers up to 100 W.

Designed for engraving, marking, and scribing lasers, CO2 Laser Beam Splitters facilitate power measurements and other dual uses by reflecting percentage of beam. Combining 10.6 Â-µm and 0.633 µm wavelengths, Laser Beam Combiners permit alignment and focusing by providing visual light beam. Made from ZnSe with various coatings to achieve polarization states, splitters permit up to...

Read More »
CO2 Laser Beam Delivery Optics work with 25-200 W lasers.
Optical Beam Splitters

CO2 Laser Beam Delivery Optics work with 25-200 W lasers.

Laser Research CO2 Beam Steering Optics include beam combiners, beam splitters, ZnSe output couplers or front mirrors, silicon and molybdenum turning mirrors, silicon and copper phase retardation reflectors, and germanium end- and zero phase-reflectors. Optimized for 10.6 Â-µm, products come in 0.6-3.0 in. dia sizes with reflectivities up to 99%. Output couplers provide reflectivity...

Read More »
Optical Beam Splitters

Automated ODF adapts PON splitting ratios to growth.

Featuring adaptive splitting capabilities, PON-AODF(TM) Automated Optical Distribution Frame upgrades Passive Optical Networks to be adaptable to service penetration and bandwidth demand changes. System preserves optical links during power loss or maintenance, and supports remote service provisioning and remote network testing. Implementing PON-AODF gives service providers flexibility to install...

Read More »
Optical Beam Splitters

Central Office Splitter Modules operate from -40 to +85°C.

Designed for use on rack card in DSLAM or within roadside cabinets, BX8841NL SmartER(TM) CO Splitters comply with ETSI TS 101-952-1-1 Option A specification for 600 W impedances, for ADSL to VDSL2 bands, and China's YD/T 1187-2006 specification for 600 W impedance for ADSL2+ band with provision for metering at 12 kHz and 16 kHz. In addition, modules are compliant with Broadband Forum TR-127 for...

Read More »
Non-Polarizing Beam Splitter's from Abrisa Technologies Reflect and Transmit Mirror Images
Optical Beam Splitters

Non-Polarizing Beam Splitter's from Abrisa Technologies Reflect and Transmit Mirror Images

Abrisa Technologies designs and manufactures durable, light weight, non-polarizing plate beam splitters or optical mirrors for those applications where image polarization must be maintained across multiple optical paths. Beam splitter plates from Abrisa Technologies are available in various levels of transmittance and reflectance. Non-polarizing beam splitters greatly reduce the polarizing...

Read More »
Optical Beam Splitters

Corning Cable Systems to Highlight Flexibility in FTTH Deployment Solutions from Central Office to the Home at the 2011 FTTH Conference & Expo

HICKORY, N.C. - Corning Cable Systems LLC, part of Corning Incorporated's (NYSE:GLW) Telecommunications segment, will highlight flexibility in fiber-to-the-home (FTTH) deployment solutions at the 2011 FTTH Conference & Expo, Sept. 26-30 in Orlando. In its updated and leading edge environmental exhibit (booth #1013), Corning will feature its latest solutions designed to make FTTH deployment...

Read More »
Optical Beam Splitters

Fiber Optic Splitters are designed for long-term stability.

Designed as monolithic components for telecom wavelength range, Planar Lightwave Circuits (PLCs) include single-mode 1 x N and 2 x N broadband splitters with up to 64 channels. Products are primarily used in passive optical distribution networks in subscriber loop of telecommunication networks (FTTH). Other applications of RoMack splitters are measuring systems, laser systems, and special PLCs...

Read More »
Optical Beam Splitters

MEMS Optical Splitter is suited for ROADM networks.

MEMS Split, Select, and Drop delivers colorless and directionless capabilities to ROADM networks. It simultaneously broadcasts multi-wavelength input signals through array of MEMS 1xN Switches, which offer switching time of less than 20 ms, and MEMS Tunable Filters. These feature ±50 pm wavelength setting accuracy within C or L Bands and tuning speed of less than 30 ms. Available with 4...

Read More »

All Topics