Oil Split Cleaner removes difficult-to-emulsify oils.
Safe ScrubÃ-® OS lifts oil from iron and steel parts and then floats oil residue to liquid surface for removal from tank by oil skimmer or coalescing filter. Used as stand-alone cleaner or pre-cleaner, product is effective on mineral oil grinding coolants, drawing and stamping lubes, and hydraulic oils as well as water soluble/synthetic fluids and surface soils. Normal cleaning cycle calls...
Read More »Oil Removal System does not pull water, soap, or coolant.
SKIMZOIL(TM) removes free-floating oils from washers, coolant sumps, and other process tanks. Floating suction head pulls oils from tank, which are trapped by weirs in separation tank and picked up by oil-attracting, rotating drum. Oils picked up by drum are scraped off with spring-loaded wiper tray and plumbed into separate waste vessel. Available in several sizes, system does not require...
Read More »Filtration System removes oil from wash water.
Cellulose-based, Extran(TM) Ultrafiltration System, Model E removes free oil, emulsified oil, and particles from parts washing water and returns clean water and soluble detergent to wash bath. Portable, stainless steel unit is built on 3 x 4 ft skid with casters and can process 100-500 gpd. Unlike conventional ultrafiltration, Extran(TM) membrane requires no cleaning.
Read More »
Oil/Water Separator maintains quality of coolant.
Model OSEP-2 portable fluid-conditioning filtration system and oil/water separator removes tramp oils from water-based coolants used in machining centers. Featuring 17 gal capacity and heavy-duty casters, system can be moved throughout plant. It helps keep bacteria levels to minimum, as well as smoking caused by oils in coolant coming in contact with hot tooling. Model OSEP-2 requires 50 psi for...
Read More »
System Selection: Smart Hardware Choices Enable a Cascade of Value
This white paper outlines six questions to help OEMs and ISVs select the right hardware design to best support their purpose-driven application and product.
Read More »Oil/Water/Solids Separator suits rental industry.
Intended for rental facilities that have access to sanitary sewer, Series WOS above-ground separator offers up to 30 gpm discharge. Unit lowers oil content in vehicle wash-water prior to discharge. It features Ã-¾ hp inline srainer pump, aluminum cover, 304 stainless steel 3-chamber tank with oil coalescing grids, V-shaped bottom, oil decanter, and 20 g/day corona discharge ozone generator...
Read More »Direct Drive Separator suits vegetable oil refining.
With gas-tight design suited for miscella refining and biodiesel production, RSE 300 uses 4,800 rpm motor and inverter with VFD drive, eliminating need for gears, clutches, and belts. Design has 50,000 kg/hr capacity in refining and degumming and minimizes number of necessary bearings.
Read More »
Purger works with large tonnage centrifugal chillers.
Industrial OAM Purger removes oil, acid, and moisture from chiller's refrigerant charge down to trace levels. System is available with NEMA 4 or Hazardous Area control enclosure options.
Read More »
Tramp Oil Separator has 13 gal tank capacity.
Freddy TOS removes oil from water in applications ranging from machine tool sumps to parts washing systems to wastewater. Running continuously while equipment is in operation, portable unit can be moved from one location to another. Filter cartridge can be removed and cleaned, and diaphragm pump provides low shear on oil for separation at flow rates up to 1.5 gpm. Available in 2 models, unit may...
Read More »
Oil Collection Device reduces machine tool coolant waste.
Oil Pure MS-BZ features Quick Suction Pot System (Q Pot) that collects floating substances through automatic surface suction, regardless of turbulence of fluid. It requires no liquid-level adjustment after installation. Pump uses bellows-type design to separate floating substances smoothly, without further agitation. Adjustable surface levels allow users to change settings to separate fluids of...
Read More »
Purger restores chiller to peak efficiency.
OAM Purger(TM) removes Oil, Acid, and Moisture from centrifugal chiller's refrigerant charge. Oil is automatically returned to chiller's oil sump. Since purger works continuously, refrigerant is permanently maintained in virtual oil-free state. OAM Purger operates independently of and has no effect on chiller operation. Installation consists of Ã-¼ in. OD copper line connections and 120 V...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
