Nylon

Quadrant Announces Broader Size Range Available in Nylatron® NSM - The Industry's Most Wear Resistant Machinable Nylon
Tubes and Tubing

Quadrant Announces Broader Size Range Available in Nylatron® NSM - The Industry's Most Wear Resistant Machinable Nylon

Machinable Nylatron NSM Outlasts Them All - Now in More Sizes (Reading, PA, July 31, 2009) - Nylatron® NSM, the machinable nylon grade known for remarkable wear resistance is now available in a broader range of tubular shapes that can be more effectively machined into bearings, bushings and wear parts. Quadrant has invested in manufacturing technology that helps machinists and ultimately users...

Read More »
Nylon

Machinable Nylon Material withstands temperatures to 300°F.

Nylatron® 4.6 high temperature nylon has heat deflection temperature (ASTM D648) over 300°F and is capable of retaining physical properties at elevated temperatures. It is suited for use in wear-resistant parts in industrial process machinery and as valve components in chemical processing applications. Reddish-brown in color, material is available in rods up to 60 mm in diameter in 3...

Read More »
Machinable Nylon Shapes feature high-temperature design.

Machinable Nylon Shapes feature high-temperature design.

Based on Stanyl® 4.6 raw material, Nylatron® 4.6 Rods and Sheets offer heat deflection temperature over 300°F. Rods up to 60 mm in diameter are available in lengths up to 3 m, while sheets are offered up to 50 mm thick in lengths of 1 and 3 m. Reddish-brown in color, Nylatron 4.6 is suitable for wear-resistant parts in industrial process machinery, as well as valve components in...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Nylon 66 Compound is suited for automotive components.
Nylon

Nylon 66 Compound is suited for automotive components.

Used for intricate or multi-cavity parts like fasteners and for engine cradle nests, Chemlon® 109 provides low-temperature notched Izod impact strength of 4.5 ft-lb/in. at -40°C and flexural strength of 7,000 psi. Featuring high-flow properties, nylon 66 compound can also resist cracking in uses such as protective dunnage or nests for low-temperature storage and shipment of automotive...

Read More »
Wear Resistant Plastic Compound Improves Performance of World's Fastest Bicycle Pump
Nylon

Wear Resistant Plastic Compound Improves Performance of World's Fastest Bicycle Pump

WINONA, MINNESOTA, USA - (February 26, 2008) - When inventor Julian Peck was developing his award winning Cyclaire bicycle mini-pump, he needed a robust wear resistant material for the bearing component and turned to custom compounder RTP Company for assistance. Cyclaire's revolutionary technology uses a pull cord system rather than the conventional pumping action normally used to inflate tires,...

Read More »
Four UL 94 V-0 Nylon Compounds Provide Wide Range of Options for Injection Molders of Electrical and Electronic Parts

Four UL 94 V-0 Nylon Compounds Provide Wide Range of Options for Injection Molders of Electrical and Electronic Parts

Chemlon® Products from Chem Polymer Include Nylon 6 and 66 in both Halogenated Reinforced Grades and Non-Halogenated Un-Reinforced Formulations FORT MYERS, FL, U.S.A., January 10, 2007: Four Chemlon® nylon compounds from Chem Polymer Corporation meet stringent flame-retardance requirements while providing a range of other performance and regulatory-compliance options for injection...

Read More »
Nylon

Thermoformable Nylon suits automotive applications.

Featuring 12% glass fiber reinforcement, PENNITE® 4512 type 6 nylon is thermally and impact modified, and black pigmented for service applications. It provides chemical resistance to oils, hydrocarbons, and most solvents. Available in sheet and roll form from .010-.250 in. thick in widths up to 50 in., PENNITE® 4512 offers thermoplastic metal replacement and is suited for air ducts,...

Read More »
Casting Machinery

Part Caster and Materials produce nylon prototypes.

Fitted with nylon program module, MCP/04 vacuum casting machine manufactures nylon prototypes and parts in 6 min. Nylons PA 700 and PA 1000 are PA-6-grade plastics that exhibit flexural modulus of 108,750-137,750 psi, tensile strength of 4,640-6,090 psi, and heat deflection temperature of 169 to 269°F @ 66 psi. RenPIM-VG SG 220 vacuum casting polyurethane is transparent white for pigmenting...

Read More »
Nylon

Thermoformable Type 6 Nylon comes in coils and sheets.

Pennite 4508 impact modified, branched polyamide 6 contains 15% glass fiber. Material is heat-aging stabilized and colored black for service. Continuous service temperature is rated at 284°F with short-term peak performance at 338°F. Product is available in coils from .010-.093 in. thick and in sheets from .031-.250 in. thick with widths to 48 in. It is suitable for thermoformed...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers