Eye Nuts are available in metric sizes.
With black-oxide finish, European standard 5.8 grade steel eye nuts are fabricated for use with setscrews or double-ended threaded studs and can also be used as swing bolts in varying lengths. Used with cap screw, eye nuts produce swiveling clamping screw. Certain sizes can be used with cylinder-head shoulder bolts.
Read More »
Rivet Nuts suit high load attachment applications.
Atlas(TM) MaxTite-® Threaded Rivet Nuts feature thicker thread and heavier wall than standard rivet nuts. They provide strong, permanent threads in blind attachment applications where only one side of workpiece is accessible for fastener installation and final component assembly. Flathead and counterunk nuts can be utilized in panels as thin as .020 in. Thread sizes range from No. 4-40 through...
Read More »
Rivet Nuts suit high load attachment applications.
Atlas(TM) MaxTiteÃ-® Threaded Rivet Nuts feature thicker thread and heavier wall than standard rivet nuts. They provide strong, permanent threads in blind attachment applications where only one side of workpiece is accessible for fastener installation and final component assembly. Flathead and counterunk nuts can be utilized in panels as thin as .020 in. Thread sizes range from No. 4-40...
Read More »
Hexagon Nuts feature tapped through socket.
NEW BERLIN, WI - J.W. Winco, Inc., a leading supplier of standard industrial machine components, now offers Steel Swivel Hexagon Nuts with tapped through socket. The body is European Standard 10.9 grade steel with a black oxide finish. The hexagon nuts are capable of clamping slanting surfaces up to three degrees without disturbing or twisting the clamped surface. Providing more than just quality...
Read More »
Guide to Replacement Fuel Tanks
What to consider when your fuel tank needs to be replaced.
Read More »
Hexagon Nuts feature tapped through socket.
NEW BERLIN, WI - J.W. Winco, Inc., a leading supplier of standard industrial machine components, now offers Steel Swivel Hexagon Nuts with tapped through socket. The body is European Standard 10.9 grade steel with a black oxide finish. The hexagon nuts are capable of clamping slanting surfaces up to three degrees without disturbing or twisting the clamped surface. Providing more than just quality...
Read More »Nut Plate fastens structures in aerospace applications.
Cherry-® Rivetless Nut Plate features retainer that does not require flaring to meet NASM25027 torque-out and push-out requirements. Uniform expansion of sleeve during installation enhances fatigue life of parent material. Nut plate applies in less than 2 sec in aluminum sheets as thin as 0.062 in. Operator inserts mandrel into predrilled hole and actuates tool. As fastener sleeve is pulled into...
Read More »Nut Plate fastens structures in aerospace applications.
CherryÃ-® Rivetless Nut Plate features retainer that does not require flaring to meet NASM25027 torque-out and push-out requirements. Uniform expansion of sleeve during installation enhances fatigue life of parent material. Nut plate applies in less than 2 sec in aluminum sheets as thin as 0.062 in. Operator inserts mandrel into predrilled hole and actuates tool. As fastener sleeve is pulled...
Read More »
Sleeves, Nuts, and Ferrules can hold 5,000 psi.
Silica SealTight(TM) sleeves, nuts, and ferrules solve problem of connecting capillary tubing to standard 10-32 coned ports intended for 1/16 in. OD tubing. Teflon-® FEP sleeves plus PEEK(TM) NanoTight(TM) nuts, and Tefzel® ferrules provide sealing and can be finger tightened to hold 5,000 psi. Twelve color-coded IDs accommodate capillary ODs from 70 µm to 1 mm.
Read More »
Sleeves, Nuts, and Ferrules can hold 5,000 psi.
Silica SealTight(TM) sleeves, nuts, and ferrules solve problem of connecting capillary tubing to standard 10-32 coned ports intended for 1/16 in. OD tubing. TeflonÃ-® FEP sleeves plus PEEK(TM) NanoTight(TM) nuts, and Tefzelî ferrules provide sealing and can be finger tightened to hold 5,000 psi. Twelve color-coded IDs accommodate capillary ODs from 70 õm to 1 mm.
Read More »
Self-Clinching Nuts suit thin-sheet applications.
Type SMPS(TM) stainless steel nuts provide reusable threads with 1 mating screw required to complete component attachment. They can be installed in sheets as thin as .025 in. to become permanent part of assembly. Made from 300 Series stainless steel, fasteners are available in unified and metric thread sizes No. 2-56 through No. 6-32 and M2.5 through M3.5. They have diameter of .220 in. and...
Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.
Read More »
