Machine Nuts

Locking Nuts do not have to be seated.

Available in class 8 zinc-plated steel and AISI-304 stainless steel, Hardlock Nuts are reusable without loss of locking ability and require only spanner for installation. Upper nut is threaded down screw until machined recess comes into contact with tapered cone of lower nut. Lower nut is held stationary, either by being seated or with spanner, and locking torque between two nuts is induced. Held...

Read More »
Clamp Assembly offers corrosion resistance.
Wing Nuts

Clamp Assembly offers corrosion resistance.

Optimizing quality assurance, Advantage Wing Nut and Clamp Assembly incorporates Advantage Wing Nut with Nitronic 60 coating, which resists corrosion and includes anti-galling properties. Tip and seat are precision-machined, providing positive lock, while electro-polished clamp offers corrosion resistance and smoothes screw head. Hex end on nut and available torque wrench allow for exact...

Read More »
Clamp Assembly offers corrosion resistance.
Wing Nuts

Clamp Assembly offers corrosion resistance.

Optimizing quality assurance, Advantage Wing Nut and Clamp Assembly incorporates Advantage Wing Nut with Nitronic 60 coating, which resists corrosion and includes anti-galling properties. Tip and seat are precision-machined, providing positive lock, while electro-polished clamp offers corrosion resistance and smoothes screw head. Hex end on nut and available torque wrench allow for exact...

Read More »
Plate Nuts

Bolt Products Inc to Distribute New Tinnerman uMax Wide Panel Speed Nut

Bolt Products an authorized distributor for Tinnerman, is helping to promote and distribute the new uMax Speed nuts. Tinnerman specially designed this new wide panel speed nut as a huge improvement to standard speed nuts. The innovative extension of the Tinnerman U-Nut product line accommodates a wide range of panel thickness from 0.5 mm to 4.0 mm. A single uMAX Wide Panel SPEEDNUT can replace as...

Read More »
Plate Nuts

Bolt Products Inc to Distribute New Tinnerman uMax Wide Panel Speed Nut

Bolt Products an authorized distributor for Tinnerman, is helping to promote and distribute the new uMax Speed nuts. Tinnerman specially designed this new wide panel speed nut as a huge improvement to standard speed nuts. The innovative extension of the Tinnerman U-Nut product line accommodates a wide range of panel thickness from 0.5 mm to 4.0 mm. A single uMAX Wide Panel SPEEDNUT can replace as...

Read More »
Machine Nuts

Hexagon Nuts suit installation in confined spaces.

Requiring one operation instead of two, Barb Nuts are cold-formed hexagon nuts with external shakeproof washers, while Carp Nuts have same design but are combined with conical spring washer. Nuts are made from low carbon steel SAE 1010 with Rockwell Hardness of C-30 max, and washers are SAE1050-1065 with hardness of HRC40-46 max. Free to rotate on nuts, washers are available in either yellow or...

Read More »
Machine Nuts

Hexagon Nuts suit installation in confined spaces.

Requiring one operation instead of two, Barb Nuts are cold-formed hexagon nuts with external shakeproof washers, while Carp Nuts have same design but are combined with conical spring washer. Nuts are made from low carbon steel SAE 1010 with Rockwell Hardness of C-30 max, and washers are SAE1050-1065 with hardness of HRC40-46 max. Free to rotate on nuts, washers are available in either yellow or...

Read More »
Plate Nuts

Non-Metallic Clip Nuts will not scratch or corrode.

Employing floating metal nut housed in composite clip, TorlonÂ-® Composite Clip Nuts withstand torque loads in excess of 100 lb-in. and are used to secure flooring, fairings, and interior trim. Nuts will not scratch structure's primer or plating during installation and/or removal and are not susceptible to corrosion. Able to be injection molded, Torlon® polymer material provides...

Read More »
Plate Nuts

Non-Metallic Clip Nuts will not scratch or corrode.

Employing floating metal nut housed in composite clip, Torlon-® Composite Clip Nuts withstand torque loads in excess of 100 lb-in. and are used to secure flooring, fairings, and interior trim. Nuts will not scratch structure's primer or plating during installation and/or removal and are not susceptible to corrosion. Able to be injection molded, Torlon® polymer material provides strength...

Read More »
Machine Nuts

Adapter Nut supports quick change hole saw systems.

Adapter nut lets users cut with any Bosch hole saw and with most major brand hole saws. It features hex shank for installation and removal with quick change mandrels. Heavy-duty hex drive design ensures that hole saws lock quickly and securely into place. Users can attach adapters to their cups, drill hole, and pull back on mandrel to change cup sizes in seconds, and can also eject plug upon...

Read More »

All Topics