PEM® S-RT™ Self-Clinching Locknuts comes with zinc plated finishing.

PEM® S-RT™ Self-Clinching Locknuts comes with zinc plated finishing.

PEM® S-RT™ Self-Clinching Locknuts comes with improved thread formations that enable mating screws to spin freely in attachment process. Offered with thread sizes ranging from #4-40 through 5/16-18 and M3 through M6 with different shank lengths, carbon steel nuts install into aluminum or steel sheets as thin as 0.8 mm. Units are compliant to RoHS standards.

Read More »
PEMSERT® Self-Clinching Stainless Steel Flush Nuts for Thin Metal Sheets Provide Strong Threads Without Protruding or Marring Assemblies

PEMSERT® Self-Clinching Stainless Steel Flush Nuts for Thin Metal Sheets Provide Strong Threads Without Protruding or Marring Assemblies

PEMSERT® self-clinching flush nuts from PennEngineering® ideally suit attachment applications where a thin metal sheet requires load-bearing threads stronger than tapped holes but must remain flat without any protrusions on either side of the sheet. They can be installed before sheet bending and forming to provide threads for mating hardware in sections that otherwise would be inaccessible for...

Read More »
L-com Global Connectivity's Interconnects are IP68 rated.

L-com Global Connectivity's Interconnects are IP68 rated.

L-com Global Connectivity’s Interconnects consist of Category 6 receptacles, plugs, jam-nuts and flange mounts which come in anodized aluminum and zinc-nickel finishes. Unit is suitable for outdoor, industrial and military applications. Product supports network speeds of up to 1 Gigabit per second and is Cat6-rated.

Read More »
PVC Coated Sealing Locknuts feature integral sleeve on reverse side.

PVC Coated Sealing Locknuts feature integral sleeve on reverse side.

Designed for fitting securely over circumference, PVC Coated Sealing Locknuts feature built-in gasket at face of locknut. Allowing sleeve to thread on 2 ½ threads, units feature specially formulated, UL recognized gasket and sleeves. Locknuts can be tightened by using strap-wrench and lube and are used with water and oils.

Read More »
PEM® Type SL™ Self-Clinching Steel Locknuts for Thin Metal Assemblies Integrate Unique TRI-DENT® Feature to Hold Mating Screws Tight

PEM® Type SL™ Self-Clinching Steel Locknuts for Thin Metal Assemblies Integrate Unique TRI-DENT® Feature to Hold Mating Screws Tight

PEM® Type SL™ self-clinching steel locknuts from PennEngineering® integrate a unique TRI-DENT® locking feature to hold mating screws tight over time by providing sufficient torsional resistance to withstand vibration, thermal cycling, and other disruptive forces that could loosen the screws in service. These prevailing torque locknuts, which meet 3 cycle locking performance to effectively...

Read More »
Drive Nut Runs on Threadless Shaft - Eliminates Risk of Jamming, Enhances Clean Operation

Drive Nut Runs on Threadless Shaft - Eliminates Risk of Jamming, Enhances Clean Operation

November 2016, Aston PA - Amacoil-Uhing Model RS drive nuts provide smooth backlash-free linear motion in machine design. Unlike a screw, the RS drive nut runs on a smooth shaft. This eliminates the potential for debris to become trapped in threads which could then clog or jam. If material does fall onto the shaft, it is easily removed by wiping the shaft with a clean cloth. Should an object...

Read More »

Unique Application for PEM® Products

PennEngineering-® (Danboro, PA, USA) has entered into an agreement to acquire Heyco-® Products Inc. (Toms River, NJ, USA), it was announced by both companies. Terms of the agreement were undisclosed and no changes are anticipated regarding Heyco’s operations, facilities, and employees. The acquisition is expected to expand sales growth opportunities for both companies. Heyco Products...

Read More »

Steinmeyer to Attend IMTS 2016 McCormick Place (Sep. 12-17)

Burlington, MA, USA, July 20, 2016- - Steinmeyer, the world’s premiere manufacturer of precision ground ball screws, announces its participation in the 2016 International Manufacturing Technology Show, Booth NC-467at McCormick Place in Chicago, from September 12-17. Company executives and engineers will be on-hand to discuss Steinmeyer’s large portfolio of ball screws, including: Miniature...

Read More »
REGO-FIX to Showcase New and Innovative Tooling at IMTS

REGO-FIX to Showcase New and Innovative Tooling at IMTS

INDIANAPOLIS, Ind. — At IMTS, REGO-FIX will unveil new tooling technologies along with innovative next generation products in booth W-2239. The company will show its new intRlox-® Mini Nut slip proof clamping system. Other featured technologies include reCool-® Mini, a retrofittable coolant-through system for use on Swiss-style machines, and Rigid Holders for extreme cutting applications that...

Read More »

All Topics