Nozzles

Water Jet Lance works at pressures from 10,000-24,000 psi.
Nozzles

Water Jet Lance works at pressures from 10,000-24,000 psi.

Able to handle flows up to 35 gpm, NCG24-286 features quick-change cartridge valve that can be replaced in field. Trigger, operated with 8-12 lb of pressure, lets operator dump pressure immediately by pushing forward. It also incorporates one-finger latch that prevents accidental actuation. Product weighs 13.5 lb, and operator can adjust shoulder stock and hand grip for optimal comfort.

Read More »
Nozzle System suits metal manufacturing.
Nozzles

Nozzle System suits metal manufacturing.

Available in 12 sizes, Cool-Cast(TM) nozzle and lance system produces rectangular pattern with spray angles between 60-120°. Consistent droplets in 130-200 micron range facilitate control of cooling process. Machined stainless steel components provide dimensional stability. Water flow rates range from 2.50-8.00 gpm and airflows range from 7-24.5 scfm. Straight or angled lances are available.

Read More »
Water Jet Head operates at 5,000-24,000 psi.
Spray and Faucet Heads

Water Jet Head operates at 5,000-24,000 psi.

Stainless steel, SPIN-NOZZLE® Viper 24(TM) features cylindrical design that helps avoid bumps as it rotates on end of water jetting lance. Head is threaded to accept 2 nozzles, which are flush-mounted to minimize impact. Viper 24 rotates by reaction energy of high-pressure water it delivers, without any external driver, turning any standard lance into water jetting tool. Lances rated at...

Read More »
Flat Air Nozzle offers adjustable force and flow.
Nozzles

Flat Air Nozzle offers adjustable force and flow.

Super 2 in. Air Nozzle has .015 in. air gap opening that is set with stainless steel shim positioned between body and removable cap. Air is released through thin slot across flat surface, resulting in wide, forceful stream of high velocity, laminar airflow. Air consumption is 21.8 scfm at 80 psig with noise level of 77 dBA, and force of 22 oz when mounted 12 in. from target. Force may be...

Read More »
Clog-Resistant Nozzles provide droplet control.
Nozzles

Clog-Resistant Nozzles provide droplet control.

Variable Coating Nozzles deliver batch production cycles lasting up to 18 hours, depending on liquids being processed. They offer independent and remotely controlled spray widths, atomizing air and flow of liquids. Air Cap Cylinder helps eliminate clogging by sucking out excess coating spray around nozzle tip. With orifice diameters sized from 0.8-2.5 mm, nozzles feature 319 SS wetted parts and...

Read More »
Atomizing Nozzle eliminates need for compressed air.
Nozzles

Atomizing Nozzle eliminates need for compressed air.

Stainless steel IceJet inlet cooling and evaporation nozzle utilizes whirl chamber that atomizes fluid without compressed air. Whirl chamber, coupled with micro-orifice, creates fine mist with droplet sizes of less than 30 microns each. Available in NPT version and straight-threaded version with O-ring seal locking mechanism, hydraulic nozzle delivers flow rates to .150 gpm @ 3000 psi and...

Read More »
Spray Nozzle has porous polypropylene filter.
Nozzles

Spray Nozzle has porous polypropylene filter.

Series PJ incorporates replaceable, porous, plastic filter that removes particles as small as 70 microns, preventing small impingement nozzle from clogging with particulate matter such as dirt, burrs, and bits of sealing tape. Filter increases surface area so contaminants are removed upstream of nozzle. Nozzle works at temperatures up to 155°F, is resistant to chemicals, and offers minimal...

Read More »
Spray-Dry Nozzle uses free-vortex swirl chamber technology.
Nozzles

Spray-Dry Nozzle uses free-vortex swirl chamber technology.

Model SDX V delivers hollow-cone spray pattern of uniform particle size, even at low operating pressures. It features interchangeable, 5-piece construction and tungsten carbide wear parts with silicon or Viton O-rings. Installation requires no wrenches or tools. Flow rates are certified to within ±5% of rated capacity at 1,000 psi. Operating temperatures and pressures can be as high as...

Read More »
Air Nozzles are fully cleanable.
Nozzles

Air Nozzles are fully cleanable.

Adjustable-thrust DuraBlast(TM) Nozzles never need replacing because of clogging. Design forces compressed air through adjustable gap that accelerates airflows, entraining surrounding air as it exits nozzle. OSHA-compliant units come in aluminum and stainless steel, with positionable flex hose or copper tube mountings. Single setscrew allows easy cleaning and micrometer-style adjustment of thrust...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics