Nozzles

Wave Soldering Systems utilize lead-free upgrades.
Nozzles

Wave Soldering Systems utilize lead-free upgrades.

Electrovert EconoPak Gold®, Electra®, and Vectra® Wave Soldering Systems may be fitted with UltraFill(TM) Nozzle, designed to increase contact length and dwell time. Nozzle also reduces temperature drop so that minimal superheat is needed to reflow solder joints in second wave. Also available, Quick Change Solder Pot provides capability to switch between 2 alloys. It includes...

Read More »
Air Nozzle produces force of 4 nozzles.
Nozzles

Air Nozzle produces force of 4 nozzles.

Featuring aerodynamic design that directs air to single point of convergence, Â-½ NPT Super Air Nozzle(TM) delivers 3.3 lb of blowing force when mounted 12 in. away from target. Compressed air is ejected through holes located in recessed grooves on nozzle surface, assuring safe operation since airflow cannot be blocked as required by OSHA standard 1910.242(b). Made of zinc aluminum alloy,...

Read More »
Spray Nozzle fits in tight spaces.
Nozzles

Spray Nozzle fits in tight spaces.

Air atomizing Model 29JAUCO offers cycling speeds from continuous to 1,000 cycles/min. To minimize profile, all mounting and inlet connections are located at back of nozzle body. Built-in, clean-out needle automatically activates during spray cycle to protect against clogging, while Drip-free® seal stops liquid flow quickly and completely. Nozzle is suited for high-speed, short duration...

Read More »
Circular Saw Nozzle lubricates blades from 30-120 in. dia.
Applicators

Circular Saw Nozzle lubricates blades from 30-120 in. dia.

Accu-Lube® 9045 attaches to 3-pump Accu-Lube® applicator system and applies smooth coat of lubricant directly to cutting edge and on both sides of saw blade. Nozzle mixes lubricant and air right at nozzle, so there is no lag time and no dry cutting. Mounting block facilitates installation, blade changes, and alignment.

Read More »
Water Jet Nozzles clear and polish tubes.
Nozzles

Water Jet Nozzles clear and polish tubes.

Rated to 20,000 psi, self-propelling Rotating Line Mole Nozzles may be repaired in-field in under 5 min. Models RLM-2-20K, RLM-4-20K, and RLM-6-20K cover flow rates from 4-18 gpm and feature integrated backward-facing orifices that propel them through hard deposits on ID of pipes and tubes. Simultaneously, part of nozzle rotates and polishes pipe ID. Stainless steel units can be pre-drilled or...

Read More »
Blow-Off Nozzles deliver uniform air pattern distribution.
Nozzles

Blow-Off Nozzles deliver uniform air pattern distribution.

Made of chemical-resistant ABS resin, interchangeable Air Wisk(TM) Nozzles are rated for applications up to 150°F and operate between 80-120 psig. Units provide solid air flow with no interruptions or breaks, making them suitable for industrial product drying, cooling, cleaning, blowing off debris, and providing air curtains to keep processes separate.

Read More »
Spray Head features self-rotating UHP water jet action.
Spray and Faucet Heads

Spray Head features self-rotating UHP water jet action.

Using standard lance, SPIN-NOZZLE® Viper 40(TM) rotates by reaction energy of water, eliminating need for specially designed lance and separate air source. Accessory operates at pressures from 24,000-40,000 psi, with max flow of 6 gpm, and can be repaired in-field in under 5 min with rebuild kit. Stainless steel head features 2 carbide and sapphire nozzle inserts rotating at up to 5,000...

Read More »
Nozzle Extensions reach out-of-the-way places.
Nozzles

Nozzle Extensions reach out-of-the-way places.

Available for conventional and HVLP spray guns, Nozzle Extensions fit applications from fine-line finishing to overglazes. Air and fluid nozzles are used with extensions for manual, touch-up, automatic, line striping, specialty, airless-hand, and airless-automatic spray guns. Small nozzles are suited for inks, stains, and dyes for fine line results, while medium nozzles meet needs of enamel and...

Read More »
Abrasive Blast Nozzle optimizes velocity of abrasive.
Nozzles

Abrasive Blast Nozzle optimizes velocity of abrasive.

Saber Blast(TM) nozzle uses rocket propulsion concepts to maximize velocity of abrasive. Designed for conventional as well as Sponge Media(TM) abrasives, product is lined with composite of silicon carbide and silicon nitride and features anti-static, anodized aluminum sheath. Nozzle, manufactured with 1Â-¼ in. brass thread or 50 mm aluminum contractor thread, can take G-50 steel grit exiting...

Read More »
CO2 Laser Nozzles control cutting gas flow.
Nozzles

CO2 Laser Nozzles control cutting gas flow.

FLOWMASTER nozzles, manufactured to ±0-10 micron for consistent performance and uniform cutting, have copper alloy design that resists build-up and abrasion. Rated for continuous service, products have micro-finished internal surfaces that facilitate airflow. Units are offered in 1- and 2-piece copper nozzles in single- and multiple-shield orifice configurations. Orifice sizes are available...

Read More »

All Topics