Multiplexers

Multiplexer transmits 2 channels on single fiber.

Bi-directional Wavelength Division Multiplexer (BWDM) uses 2 separate wavelengths to carry 2 distinct channels up to 20 km distance. Either 1310 or 1550 nm wavelength is used to transmit, while other wavelength is used to receive, eliminating need to install second fiber and doubling capacity of existing cable. It is suitable for MAN and LAN applications.

Read More »
Fiber-Optic Video Multiplexer provides 32 channels.

Fiber-Optic Video Multiplexer provides 32 channels.

Digitally encoded, 8-bit System VT/VR73230 utilizes Course Wavelength Division Multiplexing (CWDM) technology. It offers loss budget of 17 dB, RS-250C medium-haul performance with 60 dB signal-to-noise ratio, over operating temperature range of -40 to +74 deg C. Unit can transmit 32 video signals up to 34 miles. It is suitable for use in CCTV and surveillance applications.

Read More »
Fiber-Optic Multiplexer transmits 16 real-time video channels.

Fiber-Optic Multiplexer transmits 16 real-time video channels.

Digital, 8-bit VT/VR71630 transmits video signals that exceed RS-250C medium-haul performance specifications. It offers loss budget of 23 dB, 60 dB signal-to-noise ratio, and operating temperature range of -40 to 74 deg C. Unit can transmit distances up to 50 miles, making it suitable for use in CCTV surveillance applications as well as Video Detection Systems.

Read More »
Multiplexer Modules offer RF switching to 2GHz and 3.5GHz.

Multiplexer Modules offer RF switching to 2GHz and 3.5GHz.

Model 7711 and 7712 RF Switch Modules are designed for Model 2700 and 2750 Multimeter/Switch Systems. Both offer 50 Ohm, dual 1x4 multiplexer configuration with rear panel SMA connectors. Modules allow flexible signal routing, with either local control through 27xx mainframe's front panel or remote PC control over GPIB or RS-232 interface. Maximum signal level is 30Vrms or 60VDC (30VDC for 7712),...

Read More »
Sponsored

Importance of Motor & Generator Maintenance & Repair in the Mining Industry

Electric motors and generators are essential components for mining industry equipment and the Battery Electric Vehicle (BEV) market. These sectors rely upon this equipment heavily to meet high production demands in rugged environments, and so they require careful design, construction, and maintenance to provide longevity and durability. Pumps, hoists, crushers, muckers, haulers, and mills are only some examples of mining and milling equipment utilizing electric motors.

Read More »
Chipset is capable of operating up to 2.7 GHz.

Chipset is capable of operating up to 2.7 GHz.

AnyRate SY87724L complete serial data multiplexer and demultiplexer provides muxing and demuxing to 4, 5, 8, or 10 bit wide buses. It can accept synchronous code group or octet boundary input, and uses input for parallel data alignment. Unit is controlled by frame logic, and features synchronous frame boundary indication, HSPC inputs and outputs, and 3.3V power supply. It is available in 80-pin...

Read More »
Video Digital Multiplexer holds 60 dB signal-to-noise ratio.

Video Digital Multiplexer holds 60 dB signal-to-noise ratio.

Model VT/VR7830DRDT 8-channel video digital multiplexer with 2 bi-directional data channels provides integration of up to 8 channels of video with PTZ and access control on 1 optical fiber. Signals are transmitted via its 8-bit digital-encoding scheme, which supports NTSC, PAL and SECAM formats. VT/VR7830DRDT transmits real-time color video, and is designed to maintain consistent signal quality...

Read More »
Multiplexer combines 16 inputs into 1 output.

Multiplexer combines 16 inputs into 1 output.

Model 2100-M Series 16 Channel Multiplexer is available in models that handle milliamp (2100-M-I), RTD (2100-M-R), voltage (2100-M-V), and thermocouple inputs (2100-M-T). Each model is field programmable for industry standard inputs and outputs, and comes in DIN rail-mountable enclosure. It can multiplex up to 16 inputs into 1 output, selectable by PLC or data logging system.

Read More »
Multiplexers are designed for digital measuring systems.

Multiplexers are designed for digital measuring systems.

ProMUX Multiplexers are available in 3 models: ProMUX-3, with 3 inputs and 1 RS232 output; ProMUX-4 and -8 with either 4 or 8 inputs and 1 RS232 or RS422 output; and ProMUX-RF with 1 input and 2-way wireless transmission to receiver with RS232 output. ProMUX-3 and ProMUX-RF are ideal for multiplexing and sending SPC data to PC. ProMUX-4 and ProMUX-8 can be cascaded to provide up to 128 channels...

Read More »

All Topics