New Multiplexers Products

SAS-to-SATA Bridge Cards suit external storage applications.

Allowing SAS capabilities to be added to existing SATA disk drives, 6 Gb/s Models LSISS9252 and LSISS9253, which are for 2.5 and 3.5 in. drives, respectively, consist of LSI(TM) AAMUX-® technology, dual-ported SAS host interface, and SATA device interface. Cards support auto-speed negotiation and Native Command Queuing, as well as full SAS SSP protocol to host, removing SATA commands and...

Flexible Remote Node unifies access and backhaul networks.

Integrated into ADVA FSP 3000 WDM System, Flexible Remote Node enables communications providers to serve customers from unified access and backhaul network. When located at curb, FRN can be configured as passive network element with environmentally hardened WDM filters that allow point-to-multipoint WDM-PON structure. When located at street cabinet, FRN can include active equipment such as...

Video Multiplexer suits remote monitoring applications.

Configured as 72 channel multiplexer characterized for operation to 1 GHz in 75 W systems, 60-721 LXI Video Multiplexer suits applications where single test resource is required to monitor multiple sources. It can be expanded using MUX expansion connections, allowing creation of larger multiplexer systems. Unit supports SNMP, allowing secure access to device from any network connected controller,...

DWDM SFP Module features 5 Gbps transmission speed.

Enabling expansion of SFP-based board design performance, transceiver can deliver output power from +3 to +6 dBm, has channel spacing of 100 GHz, and offers full C and L band coverage. Optical engines consist of Bookham Avalanche Photodiode (APD) Receiver and buried-heterostructure directly modulated laser. Able to achieve uncompensated reach of 400 km at 2.5 Gbps, solution can operate in...

How to Choose the Right Vacuum Chamber

To learn more about avoiding the pitfalls in choosing a vacuum chamber manufacturer and KTC's expertise in this area, download this white paper now.

PXI Solid-State Switches handle currents up to 120 A.

Six-channel fault insertion switches 40-192/40-191 each have 2 fault busses capable of hot switching signals up to 10 A, 200 V and 30 A, 40 V, respectively. As 6-channel SPST switches, 40-182/40-183 carry ratings of 10 A, 200 V and 30 A, 40 V, respectively. Multiplexers 40-666/40-667 come in dual 3-channel or single 6-channel configurations with 10 A, 200 V and 30 A, 40 V ratings, respectively....

DPDT Analog Switches offer

Designed for multiplexing high speed USB 2.0 signals at 480 Mbps, Models MAX4983E/MAX4984E DPDT analog switches feature 5 W typ on-resistance and 950 MHz bandwidth. Fully specified to operate from single, 2.8-5.5 V supply voltage, devices are protected against 5.5 V shorts to COM1 and COM2. Units are available in 2 x 2 mm, 10-pin DFN and 1.4 x 1.8 mm, 10-pin UTQFN packages, and have operating...

Switching Multiplexer can be supported by any 3U PXI chassis.

With POTS, USB 2.0, AFDX, and Gigabit Ethernet capability, Model 40-736 can switch communications signals carried on 100 W differential pair cables. It is configured as 8:1 or 16:1 multiplexer for GbE and 100BaseT/AFDX applications, respectively. I/O signals are carried on 78 way D Type connector, while interface adaptor card converts signals to 8:1 Ethernet MUX on RJ45 connectors for direct...

CML Output ICs operate up to 3.2 GHz.

Series SY54xxx includes 7 low voltage CML output products with core power supply of 2.5 V that can interface directly to devices powered by 1.2/1.8 V supply. Products include 1:2 fanout buffer, differential line driver/receiver, 2:1 multiplexer, and 2 x 2 crosspoint switch. AC performance is guaranteed from dc through 2.5-3.2 GHz or 3.2 Gbps, with rise and fall times of less than 95 ps. Jitter...

Plug-In Cards expand system switch/multimeter functionality.

Model 3724 Dual 1X30 FET Relay Multiplexer Card offers scanning speeds over 1,000 channels/sec, including measurement, and switch-only scan rates over 1,200 channels/sec. Solid state relays can be automatically configured into dual 1 x 30 or 1 x 60 multiplexer. Gated with 1 MHz input rate, Model 3750 Multifunction I/O Card features 40 DIO channels with high-current driver outputs that sink up to...

Analog Multiplexers and Switches have low leakage currents.

Suited for precision instrumentation applications, DGxxx Series includes 4 analog multiplexers and 4 analog switches that combine charge current from 0.5-1.0 pC, switch capacitance of 2 and 3 pF, leakage currents from 0.25-5 nA, and typical on-resistance from 66-72 W. All operate from 2.7-12 V single supply or from -

Acoustic and Thermal Solutions for Original Equipment Manufacturers

Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.